VRTS_SF_HA_Solutions_5.1_SP1_RHEL.tar.gz 要收集的日誌
/etc/llttab
/etc/VRTSvcs/conf/config/main.cf
/var/log/messages
/var/VRTSvcs/log/engine_A.log
# ifconfig -
/etc/VRTSvcs/conf/config/main.cf
/var/log/messages
/var/VRTSvcs/log/engine_A.log
# ifconfig -
心跳線 /etc/llttab
網卡設備文件 /etc/sysconfig/network-scripts/ifcfg-eth0
如果是對 Vxfs文件系統的修復,可執行如下命令
# fsck -t vxfs [-o full] /dev/vx/rdsk//
# fsck -t vxfs [-o full] /dev/vx/rdsk//
心跳線不用配置IP地址,只要網卡是激活狀態,接上網線就可以了。
心跳線要2根,以實現冗餘。(只针对vcs)
例如 eth6,eth7为心跳网卡,不用配IP.bond0是外网网卡(办公网IP为10.192.168.2)为lowpri心跳线。
[root@vcstest01 ~]# cat /etc/llttab
set-node vcstest01
[root@vcstest01 ~]# cat /etc/llttab
set-node vcstest01
set-cluster 10001
link eth6 eth-00:26:55:e9:fd:0f - ether - -
link eth7 eth-00:26:55:e9:fd:0e - ether - -
link-lowpri bond0 bond0 - ether - -
[root@gbcdmp21 ~]#
賽們鐵克的技術文章 https://sort.symantec.com/documents
link eth6 eth-00:26:55:e9:fd:0f - ether - -
link eth7 eth-00:26:55:e9:fd:0e - ether - -
link-lowpri bond0 bond0 - ether - -
[root@gbcdmp21 ~]#
賽們鐵克的技術文章 https://sort.symantec.com/documents
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/23757700/viewspace-719600/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/23757700/viewspace-719600/