1、连接MP端口
1)先用串口线连接MP 口
2)打开超级终端,选 com1,设置选“还原默认值”设置如下:9600、数据位8、
3)连接后会提示MP Loing,输入帐号密码 Admin / Admin (注意在超级终端的 传送-》捕获文字 来保存你的信息到文件上)
4)MP 登录后系统会提示“Console Login” ,这时直接按 CTRL+b CTRL+b CTRL+b 就进到MP 的模式了
5)进入MP 模式后会看到菜单:
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel (partition status)
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
HE: Help
X: Exit Connection
6)选 SL SL SL 进入,会有子菜单:
EVENT LOG MENU:
FPL: Forward Progress Log
SEL: System Event Log
LIVE: Live Events
CLR: Clear FPL and SEL
Q: Quit
7)选 SEL SEL SEL ,进入下一级
Welcome to the SEL (System Event Log) Viewer
The following SEL navigation commands are available:
D: Dump log starting at current block for capture and analysis
F: Display first (oldest) block
L: Display last (newest) block
J: Jump to specified entry and display previous block
+: Display next (forward in time) block
-: Display previous (backward in time) block
: Repeat previous +/- command
: Repeat previous +/- command
?: Display help
^B: Exit viewer
The following event format options are available:
K: Keyword
R: Raw hex
T: Text
The following event filter options are available:
A: Alert level
C: Cell
U: Unfiltered
然后按Enter Enter 或是Space Space 会列出日志信息
[7620_01] MP:VWR (,,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [7620_01] t
Switching to text format.
[7620_01] MP:VWR (,,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [7620_01]
Log Entry 5533: 12/02/2012 00:00:24
Alert level 2: Informational
Keyword: MP_TIMESTAMP
MP timestamp event.
Reporting Entity: Management Processor located in cabinet 0
0x4b001a6600e00045 0x0100000050ba9a18
Log Entry 5532: 12/01/2012 21:18:25
Alert level 2: Informational
Keyword: IPMI Type-E0 Event
Event definition not found
Reporting Entity: Unrecognized report entity type
Legacy PA HEX Code: 0x01001
0x5f801c2f02e00043 0x0000000000001001
0x4b001c2f02e00044 0x0100000050ba7421
8)输入 ctrl+b ,然后再 q,回到主菜单:
9)再入 CM ,输入 ps 查看状态信息
[7620_01] MP:CM> ps
Display detailed status of the selected MP bus device.
The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
| | | | | | | |
| | |LAN\| Sys | | IO | |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M S|0 1| | 0 1 | 0 1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |* | *| * | * | * * | * * |
+---+----+----+-----+-----+-------+-----+
You may display detailed power and hardware status for the following items:
T - Cabinet
S - System Backplane
G - MP (Core I/O)---------------------------------------------这里可以选择自己想要查看的设备的信息
P - IO Chassis
C - Cell
Select Device: t
HW status for rx7620 cabinet : FAILURE DETECTED
Power switch is on
Right Door is closed
Top Door is closed
Left Door is closed
Total Power Available 7200 VA
Total Power Needed 1535 VA
Power Redundancy : redundant
Power Viability : viable
Power Status
---------------+-----+-----+-------+-----+
| | | | |
| Sys | | IO | |
|Bkpln|Cells|Chassis| BPS |
| | 0 1 | 0 1 | 0 1 |
---------------+-----+-----+-------+-----+
Populated | * | * | * * | * * |
Enabled | * | * | * | * * |
Power OK | * | * | * | * * |
Warning/Fault | | | | |
Attention LED | | | | |
AC Line status:
Line A0 Present
Line A1 Present
Line B0 Present
Line B1 Present
2、 管理MP
CO
在主菜单模式下输入co,可以使屏幕脱离MP 管理状态进入到OS 的 Console 界面,可以进入到操作系统之中,然后操作和在普通的终端上操作并无区别。 需要从OS 的 console 界面退回到MP 管理界面中,需要输入“Ctrl+B”。因此co 和 Ctrl+B 是 MP 中最常用的两个命令,co 是从MP 切换到操作系统的console,而 Ctrl+B 是从操作系统console 切换到MP 的管理界面之中。
VFP(Virtual Front Panel)
可以显示当前系统的指示灯状态,显示系统的正常与否。
CM
cm 是命令模式,输入cm 后系统进入到cm 模式中,该模式有很多命令可以对系统进行管理,其中最常用的为lc 和 pc,下面着重介绍这两个命令,其他命令可以使用输入help 查看。
Lc (Lan config):
是设置MP 上的网卡的IP 地址,以便通过远程方式访问MP,在输入lc 后系统应该显示,输入A 进行修改,按照命令的提示输入相应的IP,网关和主机名,最后保存即可,然后可以使用telnet 访问该MP。
PE (V11.31)-----pc(Power Control):
使用该命令可以远程给系统上电和下电,输入后应该显示。可以输入on/off 来控制系统的加电情况。 在主菜单中的其他命令,用法都比较简单,可以使用help 查看即可。 在11.31版本中使用的PE
[7620_01] MP:CM> he 查出所有常用命令
Management Processor Firmware revision 7.008, Dec 1 2005 at 16:43:35
Detailed help on commands is available from the main menu (MP> he)
The following are the Service commands that are available
BO : Boot a partition.
DATE : Set the time and date
DF : Display FRU information of an Entity.
FW : Firmware Update Utility
DFW : Duplicate Firmware
MA : Return to the Main menu.
MR : Modem Reset
OSP : Online Scan Programming Utility
PE : Power entities on or off.
PWRGRD : Allows user to configure the power grid
RE : Reset entity.
RR : Reset a partition for reconfiguration.
RS : Reset a partition.
SYSREV : Returns all System Revisions
3、 清除全部的系统log
当系统日志满的时候,需要清除旧的系统日志
[7620_01] MP> sl
EVENT LOG MENU:
FPL: Forward Progress Log
SEL: System Event Log
LIVE: Live Events
CLR: Clear FPL and SEL
Q: Quit
[7620_01] MP:VW> clr
Are you sure you want to clear the FPL and SEL logs? (Y/[N]) y
Clearing all of the event logs.
4、 检查主机FW
[7620_01] MP> cm
Enter HE to get a list of available commands
[7620_01] MP:CM> sysrev
Cabinet firmware revision report
PROGRAMMABLE HARDWARE :
System Backplane : GPM FM OSP
------- ------- -------
1.003 1.002 1.002
PCI-X Backplane : LPM HS
------- -------
2.000 1.000
Core IO : Master Slave
-------- -------
2.011 0.000
LPM PDHC
------- -------
Cell 0 : 0.000 0.000 - not installed
Cell 1 : 1.002 1.010
FIRMWARE:
Core IO
Master : A.007.008
Event Dict. : 1.015
Slave : A.000.000 - not installed
Event Dict. : 0.000
Cell 0 - not installed
PDHC : A.000.000
Pri SFW : 0.000
Sec SFW : 0.000
Cell 1
PDHC : A.003.027
Pri SFW : 23.001 (PA)
Sec SFW : 3.096 (IA)
5、检查主机电源和风扇状态
检查主机电源和风扇问题时可以使用cm 菜单中的命令ps
6、 做 TOC
有时在系统故障诊断时,需要做TOC,生成dump 文件供响应中心诊断分析,找出故障原因。
注意:TOC 会使系统shudown 并将内存中的信息dump 到硬盘,以便再诊
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/27038344/viewspace-750399/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/27038344/viewspace-750399/