This type of Single-Stage Hammer Crusher features high feeding granularity, low discharging granularity, hammerhead long service life, great production capacity, low electricity consumption, convenient maintenance, low operating costs, etc. Compared with the single stage hammer crusher, the single stage fine crusher has lower product granularity (80% <5mm). Compared with traditional equipment of the same scale, the single stage fine crusher requires 35~50% less equipment investment and about 30% less long-term operating and management cost.
- Features
- Technical Data
- Related Products
Application
- 1. DPX series single-stage fine hammer crusher is suitable for the single-stage crushing of the brittle material with middle hardness.
- 2. DPX series single-stage fine hammer crusher is widely used in the cement, artificial sand, ceramic, glass, coal, metalloid mine and new green building materials industries.
- 3. It can handle coarse, middle and fine material with one step, the investment can be reduced by 35-50% than the cost of traditional secondary or three stages.
Working Principle
The large material is fed into the cavity, and then stacked on the airframe. in the machine. The hammer are working in the middle of the gaps in bracket, breaks the material continuous and fall down, the small material is stroke again by the high-speed hammer, finally discharging from the grid plate.
http://dwcrusher.com/products/stone-crushers/single-stage-hammer-crusher.html
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/27663704/viewspace-741786/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/27663704/viewspace-741786/