the Working principle and working characteristics of cone crusher

Working principle of cone crusher:

The working parts are two cutter haeds, also called cones; one is fixed cone ( also called outer cone), the other one is movable cone ( also called inner cone), please refer to the picture. The outer cone is fixed, which is one part of frame; the movable cone is pluged freely in the eccentric bush, so the central axis between the fixed cone and the movable cone intersects and forms into a bevel. When rotating, the movable cone rotates along the inner suface of the fixed cone. The place that the movable cone pressed against the fixed cone becomes the crushing cavity, where the materials is pressed, impacted and bent by the movable cone. The place that the movable moves away from the fixed cone becomes the discharging open, where the crushed materials is discharged out under the role of gravity, and the materials are sent from the feed open.

Working characteristics of cone crusher:

• 1) Movable cone rotates continuously, and the material crushing process and the unloading process works alternately along the work surface, which realizes the high output.
• 2) The materials are pressed, bent and sheared in the two cones, and can be easily crushed; lower power consumption
• 3) Even product granularity, cubic shape, the abrasion in the working surface of movable cones is even.
• 4) Structure introduction: cone crusher mainly consists of frame, horizontal shaft, movable cone, balance wheel, eccentric, upper crushing wall (fixed cone), under crushing wall (movable cone), Hydraulic coupling, lubrication system, hydraulic system, control system and so on.
• 5) Movable cone and fixed cone are being set. When movable cone swings, near the discharging open of the crushing chamber, there is parallel trough with equal gap between movable cone and fixed cone to make sure the final size even. Feed open is not big and only handles the materials after primary crushed.

This series cone crusher uses dry oil and water as two sealing ways, so that the dust will not enter into the inner of the machine, thus ensure the cleaning of the Run free oil, extend the life of plain bearings, thrust ball bearing , and make the machine running reliably.

http://www.dwcrusher.com/products/stone-crushers/cone-crusher.html

http://www.dwcrusher.com/

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/27663704/viewspace-742289/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/27663704/viewspace-742289/