1. Set an impact crusher as fine crusher in the front stage of grinding when using ball mill. As a result, the mineral stone will be first crushed through the crusher. As the mineral particles become smaller in size, it is easy to reduce the grinding system load.
2. Operators should apply the lubricating oil to main shafts and bearings as soon as possible.
3. Check the grinding system regularly, if necessary, operators should change some broken parts.
4. Install a high-efficiency separator so as to lighten the load of ball mill. This way reduces the powder retrieval rate as well as the mill burden. Any of the three methods listed above can greatly improve the ball mill output.
5. The ball mill should be operated according to the regulations.
As we all know, when using a ball mill equipment, we should handle well the relationships between crushing, grinding and sorting. Operators should bear in mind that the premise of grinding is crushing, after the sorting, the grinding should be done. Any of the five methods mentioned above can greatly improve the capacity of ball mill
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/27663704/viewspace-744441/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/27663704/viewspace-744441/