如何修复iTunes中未显示的iPhone或iPad

You plug your iPhone into your computer, ready to sync and…nothing. The little icon doesn’t show up in iTunes’ toolbar, and you’re flummoxed. Here are a few possible solutions.

您将iPhone插入计算机后，就可以同步了……什么也没有。 这个小图标没有显示在iTunes的工具栏中，您很困惑。 这里有一些可能的解决方案。

You can use an iPhone or iPad without ever touching iTunes, but it isn’t always easy. iTunes sucks on Windows, but it’s still useful for the occasional backup or software update when iOS is being frustrating. But there’s nothing more frustrating than when iTunes doesn’t detect your iPhone or iPad when you plug it in.

您可以使用iPhone或iPad而无需接触iTunes ，但这并不总是那么容易。 iTunes在Windows上很烂，但是当iOS令人沮丧时，它对于偶尔的备份或软件更新仍然有用。 但是，没有什么比插入时iTunes无法检测到iPhone或iPad时令人沮丧的了。

There are a myriad of things that could cause this, but we’ve seen this problem more than a few times over the years. Here are some of the most reliable fixes we’ve found.

可能有很多原因造成这种情况，但是多年来，我们已经多次看到此问题。 这是我们找到的一些最可靠的修复程序。

从上一个开始：重新启动，更新并尝试另一个USB端口 (Start with the Obvious: Restart, Update, and Try Another USB Port)

Before you try anything else, it’s worth going through the usual troubleshooting tips:

在尝试任何其他操作之前，值得仔细阅读一下常见的故障排除提示：

• Restart your iPhone by pressing both the Power and Home buttons and hold them down. (In the case of the iPhone 7, press and hole the Power button and the volume down button.)
  同时按下电源和主页按钮，然后按住它们，以重新启动iPhone。 (在iPhone 7的情况下，按住电源按钮和降低音量按钮并插入Kong。)
• Restart your computer as well.
  也重新启动计算机。
• Make sure both Windows and iTunes are up to date. Click Start and type “Windows Update” to check for Windows updates, and head to Help > Check for Updates in iTunes to update iTunes. (You can even try reinstalling iTunes, if you’re feeling thorough.)
  确保Windows和iTunes都是最新的。 单击开始，然后键入“ Windows Update”以检查Windows更新，然后转到“帮助”>“在iTunes中检查更新”以更新iTunes。 (如果您感到很彻底，甚至可以尝试重新安装iTunes。)
• Try another USB cable, or another USB port on your computer. Plug it directly into your computer instead of a USB hub. You never know when you have bum hardware, and no amount of software troubleshooting can fix that problem.
  尝试使用另一根USB电缆或计算机上的另一个USB端口。 将其直接插入计算机而不是USB集线器。 您永远不知道何时拥有硬件，并且没有大量软件故障排除可以解决该问题。

With any luck, one of these simple tricks will fix the problem. But if not, read on.

运气好的话，这些简单的技巧之一就能解决问题。 但是，如果没有，请继续阅读。

响应“信任此计算机”提示 (Respond to the “Trust This Computer” Prompt)

When you plug an iPhone or iPad into your computer for the first time, a message will pop up on your device, asking whether it should trust the computer it’s been plugged into. If you aren’t paying close attention, it’s easy to miss–and without responding to that prompt, your device won’t show up in iTunes.

首次将iPhone或iPad插入计算机时，设备上会弹出一条消息，询问是否应信任插入的计算机。 如果您没有密切注意，很容易会错过–而且如果不响应该提示，则设备将不会显示在iTunes中。

Even if it isn’t the first time you plugged your device in some settings may have been reset, and you’ll need to respond to the prompt again. So check your device and see if the message has popped up. Tap “Trust” to continue.

即使这不是您第一次将设备插入某些设置，也可能已重置，并且您需要再次对提示进行响应。 因此，请检查您的设备并查看消息是否弹出。 点击“信任”继续。

重置您的位置和隐私设置 (Reset Your Location & Privacy Settings)

If you ever pressed “Don’t Trust” by accident, your device won’t show up in iTunes…and the message won’t pop up again. Thakfully, there’s a way to fix this.

如果您不小心按下了“不信任”，则您的设备将不会显示在iTunes中，并且该消息也不会再次弹出。 坦白地说，有一种解决方法。

This is stored in the “Location & Privacy” settings in iOS. You can reset them by going to Settings > General and tapping “Reset Location & Privacy”.

这存储在iOS的“位置和隐私”设置中。 您可以通过转到设置>常规，然后点击“重置位置和隐私”来重置它们。

Next time you plug the device in, the “Trust This Computer” prompt should appear. (Note that this may also erase a few other settings–like which iOS apps are allowed to use your location–so you’ll have to deal with those prompts again too.)

下次插入设备时，将出现“信任此计算机”提示。 (请注意，这还会删除其他一些设置(例如允许哪些iOS应用使用您的位置)，因此您也必须再次处理这些提示。)

重新安装Apple的Windows驱动程序 (Reinstall Apple’s Windows Drivers)

Other times, things can go a little wonky with Apple’s drivers, and your Windows PC won’t recognize your iOS device properly anymore–even if you press “Trust” repeatedly. In my most recent bout with this problem, the drivers were to blame, and just needed reinstalling.

有时，使用Apple的驱动程序可能会有点不正常，即使您反复按“信任”，Windows PC也将无法正确识别iOS设备。 在我最近一次有关此问题的回合中，应归咎于驱动程序，只需要重新安装即可。

Close iTunes and plug your iPhone or iPad into your computer via USB. Then, click the Start menu and search for “Device Manager”. Select the Device Manager option that pops up.

关闭iTunes，然后通过USB将iPhone或iPad插入计算机。 然后，单击开始菜单，然后搜索“设备管理器”。 选择弹出的设备管理器选项。

Search for your iPhone or iPad in the Device Manager–you should find it under “Portable Devices”. Right-click it and choose “Update Driver Software”.

在设备管理器中搜索iPhone或iPad，您应该在“便携式设备”下找到它。 右键单击它，然后选择“更新驱动程序软件”。

On the next window, select “Browse My Computer for Driver Software”.

在下一个窗口中，选择“浏览我的计算机以获取驱动程序软件”。

Then, click “Let Me Pick From a List of Device Drivers on My Computer”.

然后，单击“让我从我的计算机上的设备驱动程序列表中选择”。

On the next screen, click the “Have Disk” button.

在下一个屏幕上，单击“从磁盘安装”按钮。

On the Install From Disk window, click the Browse button. Navigate to C:\Program Files\Common File\Apple\Mobile Device Support\Drivers\usbaapl64.inf. Double-click the usbaapl64.inf file to select it, then click OK in the Install From Disk window.

在“从磁盘安装”窗口上，单击“浏览”按钮。 导航到C：\ Program Files \ Common File \ Apple \ Mobile Device Support \ Drivers \ usbaapl64.inf。 双击usbaapl64.inf文件将其选中，然后在“从磁盘安装”窗口中单击“确定”。

NOTE: If you’re on an older 32-bit computer, the driver may be in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers instead.

注意：如果您使用的是32位旧计算机 ，则驱动程序可能位于C：\ Program Files(x86)\ Common Files \ Apple \ Mobile Device Support \ Drivers中。

Your PC should reinstall Apple’s mobile drivers. Close the Device Manager when you’re finished and start iTunes. You should find that your device is properly recognized.

您的PC应该重新安装Apple的移动驱动程序。 完成后关闭设备管理器，然后启动iTunes。 您应该发现设备已被正确识别。

翻译自: https://www.howtogeek.com/274863/how-to-fix-an-iphone-or-ipad-that-doesnt-show-up-in-itunes/