mac更换apple id_如何查找您的Apple TV的IP和MAC地址-CSDN博客

mac更换apple id

For certain router configurations, shared networks (such as those found in hotels and dorms), and other situations it’s important to identify your Apple TV’s IP and/or MAC address. Read on as we show you how.

对于某些路由器配置，共享网络(例如在旅馆和宿舍中使用的网络)以及其他情况，重要的是识别Apple TV的IP和/或MAC地址。继续阅读，我们向您展示如何。

Note: Although the screenshots and general tutorial that follows apply to the Apple TV 4th generation and above the process is similar to the older Apple TV models.

注意：尽管下面的屏幕截图和一般教程适用于第四代及以上的Apple TV，但此过程类似于较早的Apple TV型号。

我为什么要这样做？ (Why Do I Want To Do This?)

For most home users it isn’t particularly important to know the IP address of their Apple TV let alone the MAC address as the Apple TV setup is pretty much plug, quickly configure, and play.

对于大多数家庭用户而言，知道Apple TV的IP地址(尤其是MAC地址)并不是特别重要，因为Apple TV设置几乎是即插即用，快速配置和播放的。

There are, however, a handful of situations where knowing the IP address or the MAC address of your Apple TV is a critical part of setting things up. If you live in a dorm room or other shared living environment where you need to give the system administrator the MAC address of any device added to the network then knowing the MAC address of your Apple TV is critical. Same thing if you’ve configured your router with a MAC whitelist or you want to assign static IPs to each device on your network.

但是，在少数情况下，知道Apple TV的IP地址或MAC地址是进行设置的关键部分。如果您住在宿舍或其他共享的居住环境中，需要向系统管理员提供添加到网络中的任何设备的MAC地址，那么知道Apple TV的MAC地址至关重要。如果您已经为路由器配置了MAC白名单，或者想为网络中的每个设备分配静态IP，则也是一样。

Historically the MAC addresses for the Wi-Fi radio and the Ethernet connection were printed directly on the bottom of the Apple TV unit and you could simply flip it over and type in the address to the web configuration tool or read the MAC address over the phone to the tech support representative.

过去，Wi-Fi无线电和以太网连接的MAC地址直接打印在Apple TV装置的底部，您可以将其翻转过来并在Web配置工具中键入地址，或者通过电话读取MAC地址。给技术支持代表。

Because this isn’t an option on the 4th generation units (and given the Apple design aesthetic likely won’t be on future generations of the hardware) let’s take a look how to check these two types of addresses on the software side of things.

因为这不是第4代产品的选择(并且考虑到Apple的设计美学可能不会在下一代硬件上使用)，所以让我们看一下如何在软件方面检查这两种地址。

查找IP和MAC地址 (Locating the IP and MAC Address)

Before we take a peek at where to look for the address information let’s make a quick but important note about when to look for the information. Because the information about the IP and MAC addresses is located within the system menus of the Apple TV you cannot check it until the initial setup is complete. Once the initial setup is complete you can check it any time but not until that point.

在窥视从何处查找地址信息之前，让我们快速而重要地说明何时查找该地址信息。由于有关IP和MAC地址的信息位于Apple TV的系统菜单中，因此您无法检查它，直到完成初始设置为止。初始设置完成后，您可以随时进行检查，但要到此为止。

This means if you are trying to get this information so you can add the Apple TV to, say, your dorm Wi-Fi network you will have to connect the Apple TV to some sort of Wi-Fi access point at least once to complete the setup and get the address information before you can give it to the tech support staff. That’s is a wee bit frustrating (compared to just reading it off a label) we know. One quick and dirty work around would be to grab a smartphone that can serve as a mobile access point such as an iPhone and, temporarily, setup and configure your Apple TV using that phone as a Wi-Fi access point.

这意味着，如果您尝试获取此信息，以便可以将Apple TV添加到例如您的宿舍Wi-Fi网络中，则必须至少将Apple TV连接到某种Wi-Fi接入点一次，才能完成此操作。设置并获取地址信息，然后再将其提供给技术支持人员。我们知道这有点令人沮丧(相比之下，只是从标签上读取它)。一种快速而又肮脏的解决方法是拿起可以用作移动接入点的智能手机(例如iPhone)，并临时使用该手机作为Wi-Fi接入点来设置和配置Apple TV。

The above work around yields the information you need because, unlike the IP address which is assigned via the hotspot/router and changes if the Apple TV is moved to a new network or given a new DHCP assignment, the MAC addresses are hard coded into the Wi-Fi and Ethernet chips and will remain the same.

上述解决方法会产生您所需的信息，因为与通过热点/路由器分配的IP地址不同，如果将Apple TV移至新网络或被赋予新的DHCP分配，则IP地址会发生变化，而MAC地址则被硬编码到Wi-Fi和以太网芯片将保持不变。

That bit of frustration-saving explanation aside let’s look at where to find the addresses once the Apple TV has been connected to a network (be that network permanent or temporary).

撇开那些令人沮丧的解释，让我们看看一旦Apple TV已连接到网络(该网络是永久的还是临时的)后，在哪里可以找到地址。

Navigate to Settings -> General -> About. In the “About” menu not only will you see information like your device’s model number, serial number, and what version of tvOS you’re running, you’ll also see what network the device is connected to, the IP address, and the “Wi-Fi Address” or “Ethernet Address” depending on what kind of network you’re connected to. The MAC address will be formatted, as seen above, in six groups of two hexadecimal digits separated by colons.

导航到设置->常规->关于。在“关于”菜单中，您不仅会看到信息，例如设备的型号，序列号以及正在运行的tvOS的版本，还将看到设备所连接的网络，IP地址以及“ Wi-Fi地址”或“以太网地址”，取决于您所连接的网络类型。如上所示，MAC地址将以冒号分隔的六组两个十六进制数字的格式设置。

We’d highly recommend writing this down and possibly even (gasp!) sticking it with a piece of tape to the bottom of your Apple TV so you don’t need to reference the system menu again to find it.

我们强烈建议写下来，甚至可能用胶带将其粘贴在Apple TV的底部，这样就无需再次参考系统菜单来查找它。

The IP address is, as we mentioned above, dependent on the network you’re on and unless you’re currently connected to the network and talking to the network administrator (or you are the network administrator and you know which network the device is on) you should disregard the IP address until the device is on the appropriate network.

如上所述，IP地址取决于您所使用的网络，除非您当前已连接到网络并与网络管理员交谈(或者您是网络管理员，并且知道设备在哪个网络上) )，则应忽略IP地址，直到设备位于适当的网络上为止。

Have a pressing question about your Apple TV or other media center devices? Shoot us an email at ask@howtogeek.com and we’ll do our best to answer it.

对您的Apple TV或其他媒体中心设备有紧迫的问题吗？向我们发送电子邮件至ask@howtogeek.com，我们将尽力答复。