如何一次将蓝牙耳机连接到多个设备

Bluetooth headphones are the future. The iPhone 7 dumped the headphone jack and, with USB-C becoming more popular, other manufacturers are likely to follow suit. And sure, the main advantage is that they get wires out of your way—but there’s another, often unrealized, benefit in a feature called “Multipoint”.

蓝牙耳机是未来。 iPhone 7抛弃了耳机插Kong，并且随着USB-C变得越来越流行，其他制造商也可能会效仿。 可以肯定的是，它们的主要优点是可以使您的布线不受干扰-但“多点”功能还有另一个通常无法实现的好处。

什么是多点？ (What Is Multipoint?)

Wired headphones can only connect to one device at a time. Plug them into your computer, and you can only use them on your computer, until you unplug them and plug them into something else. That’s how headphones have always worked.

有线耳机一次只能连接到一个设备。 将它们插入计算机后，您只能在计算机上使用它们，直到您将其拔出并将其插入其他设备。 这就是耳机一直工作的方式。

Many Bluetooth headphones, though, can connect to more than one device at a time thanks to a protocol called Multipoint. Not all headphones support it, but most mid- to high-end headphones from manufacturers like Bose, Sennheiser, Beats, and so on do. Even budget headphones from some manufacturers like Jabra have Multipoint. Not sure if your headphones support it? Google their model number with the word multipoint  to find out.

但是，由于采用了称为Multipoint的协议，许多蓝牙耳机可以一次连接到多个设备。 并非所有耳机都支持它，但是Bose，Sennheiser，Beats等制造商的大多数中高端耳机都支持。 甚至来自Jabra等制造商的廉价耳机也具有Multipoint。 不确定您的耳机是否支持？ 谷歌他们的型号与单词multipoint找出。

如何使用多点(您的耳机可能会有所不同) (How to Use Multipoint (Your Headphones May Vary))

To use Multipoint, you just need to connect your headphones to more than one device—though this can be trickier than it sounds. Once I connected my Sennheiser Momentum 2.0s to my phone, for example, they stopped trying to connect to any other devices automatically. They’d just search for my phone every time I turned them on. For a while, I even thought Bluetooth on my Mac was broken because it could never find my headphones.

要使用Multipoint，您只需要将耳机连接到多个设备即可，尽管这可能听起来有些棘手。 例如，将Sennheiser Momentum 2.0s连接到手机后，他们就停止尝试自动连接到其他任何设备。 每当我打开电话时，他们都会搜索我的电话。 有一阵子，我什至以为Mac上的蓝牙坏了，因为它找不到我的耳机。

After digging through the Momentum’s instruction manual, I found that I had to put the headphones into “pair mode”. This involved holding a button down for five seconds. Once they were in pair mode, they could connect to new devices. It won’t be the same for every set of headphones, but if you think yours support Multipoint and your other devices won’t find them, have a look at the manual to see what you need to do to connect them to more than one device at once.

仔细阅读Momentum的使用说明书后，我发现必须将耳机置于“配对模式”。 这包括按住按钮五秒钟。 一旦进入配对模式，便可以连接到新设备。 并非每套耳机都一样，但是如果您认为您的耳机支持Multipoint，而其他设备找不到它们，请查看手册，以了解将其连接至多个耳机所需的操作。装置。

Once you’ve got your headphones connected to more than one device, say your phone and your computer, you’re ready to go. Your headphones will automatically swap between the two as needed. If you’re listening to music on your computer and a call comes through on your phone, the music will stop playing and the headphones will work for your phone. When you’re done, hang up, push play on your computer and you’ll be back jamming to the Bieb while you work.

将耳机连接到多个设备(例如电话和计算机)后，就可以使用了。 您的耳机将根据需要自动在两者之间切换。 如果您正在计算机上听音乐并且手机上打了电话，则音乐将停止播放，并且耳机将可以在手机上使用。 完成后，挂断电话，在计算机上推动播放，然后在工作时就会回到Bieb上。

翻译自: https://www.howtogeek.com/297281/how-to-connect-your-bluetooth-headphones-to-more-than-one-device-at-a-time/