更改word 默认字体_更改Word中的默认字体大小

更改word 默认字体

Are you frustrated by always having to change the font size before you create a document it Word?  Here’s how you can end that frustration and set your favorite default font size for once and for all!

您是否在创建Word文档之前总是不得不更改字体大小而感到沮丧？ 这是您如何结束这种挫败感并一劳永逸地设置自己喜欢的默认字体大小的方法！

Microsoft changed the default font font to 11 point Calibri in Word 2007 after years of 12 point Times New Roman being the default.  Although it can be easily overlooked, there are ways in Word to change the default settings to anything you want.  Whether you want to change your default to 12 point Calibri or to 48 point Comic Sans…here’s how to change your default font settings in Word 2007 and 2010.

在将12点Times New Roman设置为默认值几年后，Microsoft在Word 2007中将默认字体更改为11点Calibri。 尽管它很容易被忽略，但是Word中有一些方法可以将默认设置更改为所需的任何设置。 您是否要将默认字体更改为12点Calibri或48点Comic Sans…这是在Word 2007和2010中更改默认字体设置的方法。

Changing Default Fonts in Word

在Word中更改默认字体

To change the default font settings, click the small box with an arrow in the lower right corner of the Font section of the Home tab in the Ribbon.

要更改默认字体设置，请在功能区中“主页”选项卡的“字体”部分的右下角单击带有箭头的小框。

In the Font dialog box, choose the default font settings you want.  Notice in the Font box it says “+Body”; this means that the font will be chosen by the document style you choose, and you are only selecting the default font style and size.  So, if your style uses Calibri, then your font will be Calibri at the size and style you chose.  If you’d prefer to choose a specific font to be the default, just select one from the drop-down box and this selection will override the font selection in your document style.

在“字体”对话框中，选择所需的默认字体设置。 注意，在“字体”框中它显示为“ + Body”； 这意味着将根据您选择的文档样式来选择字体，而您只是选择默认的字体样式和大小。 因此，如果您的样式使用Calibri，则您选择的字体和大小将是Calibri。 如果您希望选择一种特定的字体作为默认字体，只需从下拉框中选择一种字体，此选择将​​覆盖文档样式中的字体选择。

Here we left all the default settings, except we selected 12 point font in the Latin text box (this is your standard body text; users of Asian languages such as Chinese may see a box for Asian languages).  When you’ve made your selections, click the “Set as Default” button in the bottom left corner of the dialog.

这里我们保留了所有默认设置，除了我们在拉丁文本框中选择了12点字体(这是您的标准正文；使用亚洲语言(例如中文)的用户可能会看到一个用于亚洲语言的框)。 做出选择后，单击对话框左下角的“设置为默认值”按钮。

You will be asked to confirm that you want these settings to be made default.  In Word 2010, you will be given the option to set these settings for this document only or for all documents.  Click the bullet beside “All documents based on the Normal.dotm template?”, and then click Ok.

系统将要求您确认是否要使这些设置为默认设置。 在Word 2010中，将为您提供仅针对此文档或所有文档设置这些设置的选项。 单击“所有基于Normal.dotm模板的文档？”旁边的项目符号，然后单击“确定”。

In Word 2007, simply click Ok to save these settings as default.

在Word 2007中，只需单击“确定”即可将这些设置保存为默认设置。

Now, whenever you open Word or create a new document, your default font settings should be set exactly to what you want.  And simply repeat these steps to change your default font settings again if you want.

现在，无论何时打开Word或创建新文档，都应将默认字体设置完全设置为所需的字体。 如果需要，只需重复这些步骤即可再次更改默认字体设置。

Editing your default template file

编辑默认模板文件

Another way to change your default font settings is to edit your Normal.dotm file.  This file is what Word uses to create new documents; it basically copies the formatting in this document each time you make a new document.

更改默认字体设置的另一种方法是编辑Normal.dotm文件。 Word使用此文件来创建新文档。 基本上，每次创建新文档时都会复制该文档中的格式。

To edit your Normal.dotm file, enter the following in the address bar in Explorer or in the Run prompt:

若要编辑Normal.dotm文件，请在资源管理器中的地址栏中或在“运行”提示下输入以下内容：

%appdata%\Microsoft\Templates

％appdata％\ Microsoft \ Templates

This will open your Office Templates folder.  Right-click on the Normal.dotm file, and click Open to edit it.  Note: Do not double-click on the file, as this will only create a new document based on Normal.dotm and any edits you make will not be saved in this file.

这将打开您的Office模板文件夹。 右键单击Normal.dotm文件，然后单击“打开”进行编辑。 注意：不要双击该文件，因为这只会基于Normal.dotm创建一个新文档，并且您所做的任何编辑都不会保存在该文件中。

Now, change any font settings as you normally would.  Remember: anything you change or enter in this document will appear in any new document you create using Word.

现在，像平常一样更改任何字体设置。 请记住：您对本文档所做的更改或输入都会出现在您使用Word创建的任何新文档中。

If you want to revert to your default settings, simply delete your Normal.dotm file.  Word will recreate it with the standard default settings the next time you open Word.

如果要还原为默认设置，只需删除Normal.dotm文件。 下次您打开Word时，Word将使用标准默认设置重新创建它。

Please Note: Changing your default font size will not change the font size in existing documents, so these will still show the settings you used when these documents were created.  Also, some addins can affect your Normal.dotm template.  If Word does not seem to remember your font settings, try disabling Word addins to see if this helps.

请注意：更改默认字体大小不会更改现有文档中的字体大小，因此它们仍将显示创建这些文档时使用的设置。 此外，某些插件会影响您的Normal.dotm模板。 如果Word似乎不记得您的字体设置，请尝试禁用Word加载项以查看是否有帮助。

Conclusion

结论

Sometimes it’s the small things that can be the most frustrating.  Getting your default font settings the way you want is a great way to take away a frustration and make you more productive.

有时候，最令人沮丧的是小事情。 以所需的方式获取默认字体设置是消除烦恼并提高工作效率的好方法。

And here’s a quick question: Do you prefer the new default 11 point Calibri, or do you prefer 12 point Times New Roman or some other combination?  Sound off in the comments, and let the world know your favorite font settings.

这是一个简单的问题：您喜欢新的默认11点Calibri，还是喜欢12点Times New Roman或其他组合？ 在评论中发出声音，让全世界知道您喜欢的字体设置。

翻译自: https://www.howtogeek.com/howto/14826/change-the-default-font-size-in-word/

更改word 默认字体