nest 设置密码_如何安装和设置Nest Thermostat

nest 设置密码

A smart thermostat is a great accessory to have, not only to be able to adjust your home’s temperature from your phone, but to also save money on your utility costs. Here’s how to install and set up the Nest Learning Thermostat in your own home.

智能恒温器是一个很好的附件，不仅可以通过手机调节房屋的温度，还可以节省水电费。 以下是在自己家里安装和设置Nest Learning Thermostat的方法。

Warning: This is a project for a confident DIYer. There’s no shame in getting someone else to do the actual wiring for you if you lack the skill or knowledge to do so. If you read the beginning of this article and immediately visualized how to do it based on past experience wiring switches and outlets, you’re probably good. If you opened the article not sure how exactly we were going to pull this trick off, it’s time to call in that wiring-savvy friend or electrician. Also note that it may be against the law, code, or regulations to do this without a permit, or it might void your insurance or warranty. Check your local regulations before continuing.

警告：这是一个充满信心的DIYer的项目。 如果您缺乏其他技能或知识，请别人帮您完成实际接线并没有什么可耻的。 如果您阅读本文的开头并根据过去对开关和插座的接线经验，立即看到了如何做，那可能很好。 如果您不确定这篇文章的开头，不确定我们将如何实现这个技巧，那么该找这个精通布线的朋友或电工了。 另请注意，未经许可执行此操作可能违反法律，法规或法规，否则可能会使您的保险或保修无效。 在继续之前，请先检查您当地的法规。

巢式恒温器是什么，为什么要一个？ (What Is the Nest Thermostat and Why Would I Want One?)

The Nest Thermostat is one of the most popular smart thermostats on the market, mostly thanks to its unique design and easy-to-use user interface. It even allows you to control your home’s heating and cooling right from your smartphone.

Nest温控器是市场上最受欢迎的智能温控器之一，这主要归功于其独特的设计和易于使用的用户界面。 它甚至允许您直接通过智能手机控制房屋的供暖和制冷。

But it’s biggest selling point is that the Nest learns your habits, and can eventually do it all automatically. So if you tend to turn down the heat when you go to bed and turn it back up when you wake up, the Nest will learn this and do it for you, without you having to program it manually.

但最大的卖点是Nest可以学习您的习惯，并最终可以自动完成所有操作。 因此，如果您倾向于在睡觉时调低热量，而在醒来时又调高热量，Nest会为您学习并为您做这些，而无需您手动进行编程。

The Nest can also learn whether you’re home or away, based on your phone’s location and the Nest’s built-in motion sensor. You can also set it manually, and tell the Nest whether you’re at home or will be away for the day or weekend so that it can heat or cool your house accordingly.

Nest还可以根据手机的位置和Nest的内置运动传感器来了解您是在家还是在外。 您还可以手动进行设置，并告诉Nest您是在家还是白天或周末不在，以便它可以相应地为您的房屋供暖或降温。

Nest Thermostat可以在我家中工作吗？ (Will the Nest Thermostat Work in My House?)

You might think that the Nest Thermostat will work with any thermostat setup in any home, but that’s not quite the case.

您可能会认为Nest Thermostat可以与任何家庭中的任何恒温器设置一起使用，但事实并非如此。

The Nest will work with any low-voltage system, but it won’t work with high-voltage systems (also known as line voltage) at all. If you’re not sure which kind of system you have, you can quickly pop off your current thermostat and take a look at the wiring.

Nest可与任何低压系统配合使用，但根本不适用于高压系统(也称为线路电压)。 如果不确定所用的系统类型，可以快速弹出当前的恒温器并查看接线。

If you see a handful of tiny wires in all sorts of different colors, then you likely have a low-voltage system, but if you see only 2-4 larger wires that are connected with wire nuts, then you likely have a high-voltage system. You can also look on the thermostat itself to see how many volts it is. If it reads something like “110 VAC”, “115 VAC”, or “120 VAC”, then you have a high-voltage system and the Nest won’t work.

如果看到少量的各种颜色不同的细电线，则可能是低压系统，但如果只看到2-4条与电线螺母相连的较大电线，则可能是高压系统。 您还可以查看恒温器本身，以了解其电压为多少伏。 如果它显示“ 110 VAC”，“ 115 VAC”或“ 120 VAC”之类的信息，则说明您有高压系统，Nest无法正常工作。

Nest.com. Nest.com 。

Nest.com. Nest.com 。

It is possible to convert to a low-voltage system if you have a high-voltage system, but it’s pretty involved and takes a bit of know-how, so if you absolutely want to install a Nest Thermostat, it might be best to call a professional to convert your system.

如果您有高压系统，则可以转换为低压系统，但是它涉及很多并且需要一些专业知识，因此，如果您绝对想安装Nest Thermostat，最好致电专业人士来转换您的系统。

Without all that said, if everything looks good on your end, here’s how to install and set up your Nest Thermostat.

无需多说，如果一切看起来都不错，这里就是安装和设置Nest Thermostat的方法。

第一步：卸下当前的恒温器 (Step One: Remove Your Current Thermostat)

Locate your thermostat and turn it off. It will still be powered on, but you should turn off the heating, cooling, and fan. It’s also a good idea to remove backup batteries if your thermostat has any.

找到您的恒温器并将其关闭。 它仍然会打开电源，但是您应该关闭加热，冷却和风扇。 如果您的恒温器有备用电池，最好也删除备用电池。

Next, you’ll need to turn off the heating and cooling at the breaker box. Sometimes, the furnace and the air conditioner are on two separate breakers, so you’ll need to switch off both. Remember, this isn’t just for your own safety, but not shutting off the heating and cooling completely can blow a fuse, which will require an electrician to fix.

接下来，您需要关闭断路器箱的加热和冷却。 有时，熔炉和空调位于两个单独的断路器上，因此您需要将两者都关闭。 请记住，这不仅是为了您自己的安全，而且没有完全关闭加热和冷却操作会烧断保险丝，这需要电工进行修理。

You might also have to turn off a third breaker for the wire that gives the thermostat power. The diagram of your breaker box may say which breaker the thermostat is connected to, but if not, it’s a safe bet that if your thermostat is located in your living room, turning off the breaker for the living room will do the trick.

您可能还必须关闭用于提供恒温器电源的电线的第三个断路器。 您的断路器盒图中可能会显示恒温器连接到哪个断路器，但是如果没有，则可以肯定地说，如果恒温器位于您的客厅中，则关闭客厅的断路器即可解决问题。

Furthermore, your furnace’s main shutoff could be next to the furnace itself, rather than on the breaker box.

此外，您炉子的主要关闭口可能在炉子旁边，而不是在断路器箱上。

Next, remove the thermostat body from the wall. It’s usually just clipped in and requires a slight tug to take it off, but you may need to unscrew yours.

接下来，从墙上卸下恒温器主体。 它通常只是被夹入，需要一点拖船才能将其取下，但是您可能需要拧开它。

From there, you’ll be able to see the wiring of your thermostat. We recommend taking a voltage tester and confirming that there isn’t power running to it. If there is, you need to go back to the breaker box and try turning off another breaker.

从那里，您将能够看到恒温器的接线。 我们建议您使用电压测试仪，并确认没有电源在运行。 如果有，您需要回到断路器盒并尝试关闭另一个断路器。

This next step is important. Take a photo of the current wire setup and note where each wire is running. Most of the time, the color of the wire will correctly correspond to the letter of the screw that it’s connected to (e.g. yellow wire connected to “Y”, white wire connected to “W”, and so on), but sometimes that isn’t the case, and you might have something like a blue wire connected to “Y”–like I do in the photo below. You can also use the included wire labels in the Nest instructional booklet to mark the wires, but taking a photo and noting where the wires go is good enough.

下一步很重要。 拍摄当前电线设置的照片，并记下每根电线的运行位置。 在大多数情况下，电线的颜色会正确地与其所连接的螺钉的字母相对应(例如，黄色电线连接到“ Y”，白色电线连接到“ W”，依此类推)，但有时并非如此，您可能会在“ Y”上连接一条蓝色导线，就像我在下面的照片中所做的那样。 您还可以使用Nest说明手册中包含的电线标签来标记电线，但是拍照并记下电线的位置就足够了。

Next, unscrew the wires from their screw terminals using the screwdriver that came with your Nest. If there are any jumper cables (i.e. short cables going from one terminal to another) you can remove them and toss them out, as you won’t need them for the Nest.

接下来，使用Nest随附的螺丝刀将电线从螺丝端子上拧下。 如果有任何跨接电缆(即从一个端子到另一端子的短电缆)，则可以将其卸下并扔掉，因为Nest不需要它们。

Once you’ve disconnected all of the wires, you can completely remove the thermostat and take off the thermostat’s wall plate, which is likely secured to the wall with a couple of screws.

断开所有电线的连接后，就可以完全卸下恒温器并取下恒温器的壁板，该壁板很可能是用几颗螺钉固定在墙上的。

第二步：安装Nest Thermostat (Step Two: Install the Nest Thermostat)

Take the Nest base plate and put it on the wall where you want the Nest Thermostat to go. Use the built-in leveler to make it level. From there, use a pencil and mark where the two screws need to go–one on the top and one on the bottom.

将Nest底板放到您想将Nest Thermostat放到的墙上。 使用内置的水平仪使其水平。 在那儿，用铅笔在需要拧紧两个螺丝的位置标记-一个在顶部，一个在底部。

If there’s a stud behind the drywall where you want the screws to go in, you’ll need to pre-drill small holes first before screwing the base plate in. Otherwise, the included screws are self-tapping and can easily be driven into drywall without pre-drilling. Drywall anchors aren’t necessary.

如果干墙后面有一个螺柱要拧入螺钉，则需要先预钻一些小Kong，然后再拧入基板。否则，附带的螺钉会自攻，很容易拧入干墙。无需预先钻Kong。 无需石膏板锚。

When you’re ready to drive in the screws (a drill is highly recommended for this), place the base plate back on the wall where you want it and feed the wires through the center hole (include the trim plate behind the base plate if you want–it’s good to use if you don’t want to spackle and paint over the spot where the old thermostat was). Take the two screws and drive them into the wall, making sure that the plate remains level as you do so.

当您准备好拧入螺钉时(强烈建议使用钻头)，将底板放回您想要的墙上，然后将电线穿过中心Kong(如果有，请在底板后面包括装饰板)。您想要的话-如果您不想在旧的恒温器所在的地方撒粉和油漆，则最好使用它。 拧下两颗螺丝并将它们拧入墙壁，并确保板保持水平。

Next, you’ll plug in the wires into the Nest’s base plate. If you’re not sure where each wire goes, you can use Nest’s wiring diagram helper online, which tell you which wires go into which ports, shown below.

接下来，将电线插入Nest的底板。 如果您不确定每条电线的去向，可以在线使用Nest的接线图帮助程序，该帮助程序会告诉您哪些电线进入了哪个端口，如下所示。

Before you connect the wires to the Nest’s base plate, you’ll need to straighten out the wires using some needle-nose pliers.

将电线连接到Nest的底板之前，您需要使用一些尖嘴钳拉直电线。

To insert and secure a wire, press down on the button and insert the wire as far as it will go. Then lift up on the button. Give the wire a nice tug to make sure that it’s snug and it doesn’t come out.

要插入并固定电线，请按下按钮，然后将电线尽可能地插入。 然后提起按钮。 给电线一个好的拖轮，以确保它紧贴并且不会脱落。

Once all the wires are inserted, push the bunch inside as far as they’ll go so that they’re not sticking out past the base plate.

插入所有电线后，将线束尽可能地向内推，以免它们伸出底板。

Next, take the main Nest Thermostat unit, making sure the Nest logo is at the top, and then simply push it in until it clicks into place.

接下来，拿起Nest Nest恒温器的主要组件，确保Nest徽标位于顶部，然后将其推入直至其卡入到位。

Remove the plastic that covers up the motion sensor.

去除覆盖运动传感器的塑料。

Go back to your breaker box and turn the power back on to every breaker that you turned off. Your Nest Thermostat will automatically boot up and the setup process will begin.

返回到断路器盒，然后重新打开关闭的每个断路器的电源。 Nest Thermostat会自动启动，并且安装过程将开始。

第三步：设置巢式恒温器 (Step Three: Set Up the Nest Thermostat)

The first step in setting up the Nest Thermostat is selecting your language. To navigate through setup (as well as the different menus when you have it set up), spin the silver dial on the unit in either direction to move the selector on the screen, and then push on the entire unit to select it.

设置Nest Thermostat的第一步是选择您的语言。 要浏览设置(以及设置后的其他菜单)，请向任一方向旋转设备上的银色拨盘以在屏幕上移动选择器，然后按整个设备以进行选择。

The next step is connecting the thermostat to your WiFi network, so push on the unit to get started.

下一步是将恒温器连接到您的WiFi网络，因此请推动装置开始使用。

Select your WiFi network from the list provided.

从提供的列表中选择您的WiFi网络。

Enter in the password for your WiFi network and then move the selector to the checkmark icon when you’re done.

输入您的WiFi网络的密码，完成后将选择器移动到选中标记图标。

You’ll get a confirmation letting you know that your thermostat is connected and online. Push on the unit to continue.

您会收到一条确认消息，通知您恒温器已连接并且在线。 推动本机继续。

Next, you’ll need to set up your location. This will display the local weather on your thermostat. Push on the unit to continue.

接下来，您需要设置位置。 这将在您的恒温器上显示当地天气。 推动本机继续。

It may ask you if you live in an area that isn’t even close to where you’re located, which is a bit odd, but simply select “No”.

它可能会询问您是否居住在离您所处位置不近的地方，这有点奇怪，只需选择“否”即可。

Select the continent that you live in.

选择您居住的大陆。

Enter in your zip code by using the silver dial to select a number. Push on the unit to move to the next digit.

使用银色拨盘输入邮政编码，选择一个数字。 推动本机以移至下一位。

Next, select what kind of place you live in: “Single-Family”, “Multi-Family”, “Apt./Condo”, or “Business”.

接下来，选择您所居住的地方：“单户”，“多户”，“公寓/公寓”或“公司”。

Select where your thermostat is located in your house or apartment.

选择恒温器在房屋或公寓中的位置。

Next, you’ll set up the heating and cooling to make sure the thermostat works correctly. Push on the unit to continue.

接下来，您将设置加热和冷却以确保恒温器正常工作。 推动本机继续。

You’ll get a diagram showing you the wires that the Nest Thermostat has detected. If all looks good, push to continue. If not, you’ll likely need to re-seat the wires to get them detected.

您将得到一个图表，显示Nest Thermostat已检测到的电线。 如果一切看起来不错，请继续。 如果没有，您可能需要重新安置电线以使其被检测到。

The next screen will confirm your system. In most cases, you’ll have heating and cooling, as well as the fan. Push to continue.

下一个屏幕将确认您的系统。 在大多数情况下，您将需要加热和冷却以及风扇。 推动以继续。

You’ll then select the fuel source for your heating. If you don’t know this, select “I Don’t Know” from the list.

然后，您将选择用于加热的燃料源。 如果您不知道，请从列表中选择“我不知道”。

After that, select the type of heating you have. The most common type is forced air heating, which will be the first option.

之后，选择您拥有的加热类型。 最常见的类型是强制空气加热，这将是第一选择。

The next step is setting the minimum and maximum temperatures that the Nest should heat or cool your house to when you’re away. Push to continue.

下一步是设置出门时Nest可以加热或冷却房屋的最低和最高温度。 推动以继续。

It’ll ask you whether your Nest should start off by using heating or cooling.

它将询问您是否应通过加热或冷却来启动Nest。

Next, you’ll set your minimum and maximum temperatures. You can leave these both “off” if you don’t want to set them. Otherwise, use the silver dial to select temperatures for each one.

接下来，您将设置最低和最高温度。 如果不想设置它们，可以将它们都“关闭”。 否则，请使用银色拨盘为每个温度选择温度。

You’ll now be able to test your system with the Nest thermostat to make sure everything’s working properly. Push to continue.

现在，您可以使用Nest恒温器测试系统，以确保一切正常。 推动以继续。

Choose whether you want to test the heating, cooling, or just the fan.

选择是要测试加热，冷却还是仅测试风扇。

Whichever you choose, make sure that air comes out of the vents and that it’s either warm or cool. If you want, find your furnace or air conditioner and make sure that it powers up.

无论您选择哪种方式，都应确保空气从通风Kong中排出，并且空气既可以是温暖的也可以是凉爽的。 如果需要，请找到您的熔炉或空调，并确保其已启动。

Once testing is complete, the Nest Thermostat itself is set up and ready to use, but you’ll also want to set up the Nest app on your smartphone.

测试完成后，Nest Thermostat本身即已设置并可以使用，但是您还需要在智能手机上设置Nest应用。

第四步：设置Nest应用进行远程控制 (Step Four: Set Up the Nest App for Remote Control)

Once you have the Nest Thermostat set up, it’s time to install the app and connect it with the thermostat so that you can monitor and change the temperature from your phone.

设置Nest Thermostat后，就该安装该应用并将其与恒温器连接起来了，以便您可以监控和更改手机的温度。

First off, download the Nest app from the iTunes App Store or Google Play, depending on your device.

首先，根据您的设备，从iTunes App Store或Google Play下载Nest应用。

Once downloaded, open it up and select “Sign up”.

下载后，将其打开并选择“注册”。

Enter in your email address and come up with a password for your Nest account. Then tap “Sign up”.

输入您的电子邮件地址，然后输入Nest帐户的密码。 然后点击“注册”。

Select “I agree” to agree to the Terms of Service and Privacy Policy, and tap “Continue” at the bottom of the next screen.

选择“我同意”以同意服务条款和隐私政策，然后点击下一个屏幕底部的“继续”。

When prompted, give your home a name in the app and tap “Next”.

出现提示时，在应用程序中为您的家命名，然后点击“下一步”。

The next screen will ask you for your address, but your zip code is the only thing that’s required. Hit “Next”.

下一个屏幕将询问您您的地址，但是唯一需要的是邮政编码。 点击“下一步”。

On the next screen, you can set up Home/Away Assist, which uses your phone’s location to automatically determine whether you’re home or away, and automatically adjusts your thermostat accordingly. You can choose not to set it up right now (you can do so later on).

在下一个屏幕上，您可以设置家庭/外出协助，它使用手机的位置自动确定您是在家还是不在，并相应地自动调节恒温器。 您可以选择不立即进行设置(以后可以进行设置)。

You can also share your Nest Thermostat with other people in the house so they can monitor and change the temperature from their own phone. You can also set this up later.

您还可以与家里的其他人共享Nest Thermostat，以便他们可以通过自己的手机监控和更改温度。 您也可以稍后进行设置。

You’ll then be taken to the main screen. Tap on the “Add” button to add your Nest thermostat to the app.

然后，您将进入主屏幕。 点击“添加”按钮，将Nest恒温器添加到应用中。

Choose “Nest Thermostat” from the list.

从列表中选择“巢式恒温器”。

Hit “Next” on the next few screens until you arrive at the following screen. To connect your Nest Thermostat to the app on your phone, you’ll need to enter in an entry key.

在接下来的几个屏幕上单击“下一步”，直到到达以下屏幕。 要将Nest Thermostat连接到手机上的应用，您需要输入一个输入键。

To get an entry key, go to your Nest Thermostat and push on the unit to bring up the home screen. Scroll to the settings gear icon and select it.

要获得输入键，请转到Nest Thermostat，然后按一下设备以显示主屏幕。 滚动到设置齿轮图标并选择它。

Scroll to “Nest Account” and select it.

滚动到“嵌套帐户”并选择它。

You’ll get a prompt saying that you’ll receive an entry key. Push to continue.

您会收到提示，提示您将收到一个输入密钥。 推动以继续。

Enter in the seven-digit entry key shown on the screen.

输入屏幕上显示的七位数输入键。

Once complete, your thermostat will say that it has successfully connected to your Nest account, and thus is connected to the Nest app on your phone.

完成后，您的恒温器会说它已成功连接到您的Nest帐户，因此已连接到手机上的Nest应用。

Your Nest Thermostat will now show up on the main screen of the Nest app.

现在，您的Nest Thermostat将显示在Nest应用程序的主屏幕上。

You can tap on it to bring it up and begin controlling your thermostat remotely.

您可以点击它以启动它并开始远程控制恒温器。

You’re all done! At this point, you can adjust the temperature of your Nest Thermostat right from your phone and from anywhere in the world. There are also a handful of settings that you should check out,  so take the time to explore the app and check out our guide to programming the Nest to get acquainted.

大功告成！ 此时，您可以直接从手机和世界任何地方调整Nest Thermostat的温度。 您还需要检查一些设置，因此花点时间浏览应用程序，并查看我们的Nest编程指南以了解相关知识。

翻译自: https://www.howtogeek.com/248396/how-to-install-and-set-up-the-nest-thermostat/

nest 设置密码