rpm的五种基本操作模式_RPM的完整形式是什么？

rpm的五种基本操作模式

RPM：每分钟转数 (RPM: Revolutions Per Minute)

RPM is an abbreviation of Revolutions Per Minute. It is a measure of the frequency of rotation, the number of turns or revolutions per minute taken by an object. It put in the picture how many times an involuntary element revolves around its axis in one minute. Therefore, RPM is the rotational speed or frequency of rotation of an involuntary element around a fixed axis such as the crankshaft of an engine, power generator turbine, CD or DVD player and turbocharger.

RPM是每分钟转数的缩写 。 它是物体旋转的频率，每分钟转数或转数的度量。 它在图片中显示了非自愿元素在一分钟内绕其轴旋转了多少次。 因此， RPM是非自愿元件绕固定轴(例如发动机的曲轴，发电机涡轮，CD或DVD播放器和涡轮增压器)的旋转速度或旋转频率。

Image source: https://www.whichcar.com.au/car-advice/what-is-rpm

图片来源：https://www.whichcar.com.au/car-advice/what-is-rpm

RPM示例 (Examples of RPM)

• The rotational speed of modern air turbine dental drills reach up to 800,000 rpm (13.3 kHz).

  现代空气涡轮机牙钻的转速高达800,000 rpm(13.3 kHz)。

• The rotational speed of a second-hand conventional analog clock is 1 rpm.

  二手常规模拟时钟的转速为1 rpm。

• Generally, DVD players also read discs at an invariable linear rate. The disc's frequency of rotation varies from 25.5 Hz (1530 rpm) when analyzing at the inmost periphery, to 10.5 Hz (630 rpm) at the external periphery.

  通常，DVD播放器还会以恒定的线性速率读取光盘。 光盘的旋转频率在最外围时为25.5 Hz(1530 rpm)，而在外围时为10.5 Hz(630 rpm)。

• The rotational speed of a washing machine's drum may vary from 500 to 2,000 rpm (8–33 Hz) for the duration of the spin cycles.

  在旋转周期内，洗衣机滚筒的转速可能在500到2,000 rpm(8–33 Hz)之间变化。

• The rotational speed of a power generation turbine with a two-pole alternator is around 3000 rpm (50 Hz) or 3600 rpm (60 Hz), depending on the country.

  具有双极交流发电机的发电涡轮的转速取决于国家/地区，约为3000 rpm(50 Hz)或3600 rpm(60 Hz)。

• In the dashboard of a car, the tachometer illustrates the frequency of rotation or rotational speed of the engine. It operates by measuring how many times the crankshaft of an engine revolves around its fixed axis in one minute. Commonly, a tachometer operates by measuring RPM in thousands so if its needle is at 2 it implies that the engine is at 2000 rpm and its crankshaft is revolving 2000 times in one minute.

  在汽车的仪表板上，转速表显示了发动机的旋转频率或转速。 它通过测量发动机曲轴在一分钟内绕其固定轴旋转多少次来运行。 通常，转速表通过千分之一的转速来测量转速，因此，如果其指针为2，则表示发动机转速为2000 rpm，并且曲轴在一分钟内旋转2000次。

• Usually, the rotational speed of a piston aircraft engine varies at a rate between 2,000 and 3,000 rpm (30–50 Hz).

  通常，活塞式飞机发动机的转速在2,000至3,000 rpm(30–50 Hz)之间变化。

• The rotational speed of the Zippe-type centrifuge for enriching uranium is at 90,000 rpm (1,500 Hz) or faster.

  用于富集铀的Zippe型离心机的转速为90,000 rpm(1,500 Hz)或更高。

• The rotational speed of Gas turbine engines is at tens of thousands of rpm. JetCat model aircraft turbines are competent of over 100,000 rpm (1,700 Hz) with the best attainment of 165,000 rpm (2,750 Hz).

  燃气涡轮发动机的转速为数万转/分。 JetCat模型飞机涡轮机的能力超过100,000 rpm(1,700 Hz)，最高可达到165,000 rpm(2,750 Hz)。

• A usual 80 mm, 30 CFM computer fan will rotate at 2,600–3,000 rpm on 12 V DC power.

  一个普通的80毫米，30 CFM计算机风扇将在12 V直流电源下以2,600–3,000 rpm的转速旋转。

• The rotational speed of a millisecond pulsar can reach around 50,000 RPM.

  毫秒脉冲星的转速可以达到约50,000 RPM。

• The rotational speed of a turbocharger can reach up to 290,000 rpm (4.8 kHz), at the same time as 80,000–200,000 rpm (1–3 kHz) is general.

  涡轮增压器的转速最高可达到290,000 rpm(4.8 kHz)，而一般转速为80,000–200,000 rpm(1-3 kHz)。

翻译自: https://www.includehelp.com/dictionary/rpm-full-form.aspx

rpm的五种基本操作模式