U盘引导安装Solaris11_x86_64

Solaris11中U盘的使用请移步至here

下载Solaris的usb镜像

http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html?ssSourceSiteId=ocomen

要使用 usbcopy 实用程序将usb镜像写入usb存储中，必须先安装distribution-constructor 软件包

pkg install distribution-constructor

solaris11中的repo配置请移步至here

然后将下载的usb镜像写入U盘

root@oracle:~# usbcopy  ./sol-11_1-live-x86.usb          //usb镜像的路径
Found the following USB devices:
0:      /dev/rdsk/c9t0d0p0      7.7 GB  Kingtiger G20    1100       //0是设备/dev/rdsk/c9t0d0p0
Enter the number of your choice: 0                //让选择写入那个usb设备

WARNING: All data on your USB storage will be lost.
Are you sure you want to install to
Kingtiger G20 1100, 7700 MB at /dev/rdsk/c9t0d0p0 ?  (y/n) y    //y确定写入
Copying and verifying image to USB device
Finished 1159 MB in 1125 seconds (1.0MB/s)
0 block(s) re-written due to verification failure
Completed copy to USB   //写入完成

将机器设置usb启动，然后开始安装！

######################

本文由笔者原创

作者：hohn

转载请注明出处