s5pv210 fimc 之 fimc-dev.c

最新推荐文章于 2017-05-24 19:59:56 发布

lyuncxw

最新推荐文章于 2017-05-24 19:59:56 发布

阅读量2.2k

点赞数

分类专栏： Cortex-A8 S5PV210

Cortex-A8 S5PV210 专栏收录该内容

2 篇文章 0 订阅

订阅专栏

fimc-dev.c 是Samsung FIMC 设备的V4L2 驱动。上层应用直接操作这个设备，进行capture，图片处理，以及overlay输出

[cpp] view plain copy

43 int fimc_dma_alloc(struct fimc_control *ctrl, struct fimc_buf_set *bs,
44 int i, int align)
45 {
46 dma_addr_t end, *curr;
47
48 mutex_lock(&ctrl->alloc_lock);
49
50 end = ctrl->mem.base + ctrl->mem.size;
51 curr = &ctrl->mem.curr;
52
53 if (!bs->length[i])
54 return -EINVAL;
55
56 if (!align) {
57 if (*curr + bs->length[i] > end) {
58 goto overflow;
59 } else {
60 bs->base[i] = *curr;
61 bs->garbage[i] = 0;
62 *curr += bs->length[i];
63 }
64 } else {
65 if (ALIGN(*curr, align) + bs->length[i] > end)
66 goto overflow;
67 else {
68 bs->base[i] = ALIGN(*curr, align);
69 bs->garbage[i] = ALIGN(*curr, align) - *curr;
70 *curr += (bs->length[i] + bs->garbage[i]);
71 }
72 }
73
74 mutex_unlock(&ctrl->alloc_lock);
75
76 return 0;
77
78 overflow:
79 bs->base[i] = 0;
80 bs->length[i] = 0;
81 bs->garbage[i] = 0;
82
83 mutex_unlock(&ctrl->alloc_lock);
84
85 return -ENOMEM;
86 }

这个函数很简单，之所以提出来说下，是因为我在DMA对齐问题上卡了一个多星期

FIMC使用预分配的物理内存来申请DMA buffer，参数中的align指明申请buffer的对齐方式，对于FIMC capture来说，似乎output DMA要求4k对齐（尽管我没有在datasheet中找到），如果给定的DMA地址没有4K对齐，FIMC DMA控制器会很聪明的从4K对齐的地址开始传送数据，这会导致了帧数据偏移。

@i 参数指定了plane数，FIMC 输出支持很多种格式，有单层的比如YUYV，两层的V4L2_PIX_FMT_NV12，还有三层的V4L2_PIX_FMT_NV12T

单层格式输出申请一个buffer，两层格式输出申请两个buffer，三层则需申请三个buffer。

[cpp] view plain copy

88 void fimc_dma_free(struct fimc_control *ctrl, struct fimc_buf_set *bs, int i)
89 {
90 int total = bs->length[i] + bs->garbage[i];
91 mutex_lock(&ctrl->alloc_lock);
92
93 if (bs->base[i]) {
94 if (ctrl->mem.curr - total >= ctrl->mem.base)
95 ctrl->mem.curr -= total;
96
97 bs->base[i] = 0;
98 bs->length[i] = 0;
99 bs->garbage[i] = 0;
100 }
101
102 mutex_unlock(&ctrl->alloc_lock);
103 }

这个函数有问题，93 ~ 95 成立的条件是bs->base[i]所占的地址必须在ctrl->mem.base最后面，这就要求释放顺序必须从bs的最后一个节点向前释放。

[cpp] view plain copy

655 static inline int fimc_mmap_cap(struct file *filp, struct vm_area_struct *vma)
656 {
657 struct fimc_prv_data *prv_data =
658 (struct fimc_prv_data *)filp->private_data;
659 struct fimc_control *ctrl = prv_data->ctrl;
660 u32 size = vma->vm_end - vma->vm_start;
661 u32 pfn, idx = vma->vm_pgoff;
662
663 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
664 vma->vm_flags |= VM_RESERVED;
665
666 /*
667 * page frame number of the address for a source frame
668 * to be stored at.
669 */
670 pfn = __phys_to_pfn(ctrl->cap->bufs[idx].base[0]);
671
672 if ((vma->vm_flags & VM_WRITE) && !(vma->vm_flags & VM_SHARED)) {
673 fimc_err("%s: writable mapping must be shared\n", __func__);
674 return -EINVAL;
675 }
676
677 if (remap_pfn_range(vma, vma->vm_start, pfn, size, vma->vm_page_prot)) {
678 fimc_err("%s: mmap fail\n", __func__);
679 return -EINVAL;
680 }
681
682 return 0;
683 }

fimc capture 设备的mmap实现，ctrl->cap->bufs[idx]是fimc capture设备申请的buffer，mmap就是把这个buffer映射到应用程序空间

661 vma->vm_pgoff 表示vm_file内以PAGE_SIZE为单位的偏移，但是在这里应用层和内核使用另外一种约定的含义，buffer ID, 应用层调用mmap接口对fimc capture设备的buffer进行映射

[cpp] view plain copy

700 static u32 fimc_poll(struct file *filp, poll_table *wait)
701 {
702 struct fimc_prv_data *prv_data =
703 (struct fimc_prv_data *)filp->private_data;
704 struct fimc_control *ctrl = prv_data->ctrl;
705 struct fimc_capinfo *cap = ctrl->cap;
706 u32 mask = 0;
707
708 if (cap) {
709 if (cap->irq || (ctrl->status != FIMC_STREAMON)) {
710 mask = POLLIN | POLLRDNORM;
711 cap->irq = 0;
712 } else {
713 poll_wait(filp, &ctrl->wq, wait);
714 }
715 }
716
717 return mask;
718 }

fimc_poll向上层应用提供了等待机制，应用程序poll fimc设备并阻塞，直到cap或者output中断处理函数唤醒

[cpp] view plain copy

732 u32 fimc_mapping_rot_flip(u32 rot, u32 flip)
733 {
734 u32 ret = 0;
735
736 switch (rot) {
737 case 0:
738 if (flip & FIMC_XFLIP)
739 ret |= FIMC_XFLIP;
740
741 if (flip & FIMC_YFLIP)
742 ret |= FIMC_YFLIP;
743 break;
744
745 case 90:
746 ret = FIMC_ROT;
747 if (flip & FIMC_XFLIP)
748 ret |= FIMC_XFLIP;
749
750 if (flip & FIMC_YFLIP)
751 ret |= FIMC_YFLIP;
752 break;
753
754 case 180:
755 ret = (FIMC_XFLIP | FIMC_YFLIP);
756 if (flip & FIMC_XFLIP)
757 ret &= ~FIMC_XFLIP;
758
759 if (flip & FIMC_YFLIP)
760 ret &= ~FIMC_YFLIP;
761 break;
762
763 case 270:
764 ret = (FIMC_XFLIP | FIMC_YFLIP | FIMC_ROT);
765 if (flip & FIMC_XFLIP)
766 ret &= ~FIMC_XFLIP;
767
768 if (flip & FIMC_YFLIP)
769 ret &= ~FIMC_YFLIP;
770 break;
771 }
772
773 return ret;
774 }

rot会影响flip的结果，该函数映射（合并）rot和 flip操作

static int fimc_open(struct file *filp)
{
	struct fimc_control *ctrl;
	struct s3c_platform_fimc *pdata;
	struct fimc_prv_data *prv_data;
	int in_use;
	int ret;

	ctrl = video_get_drvdata(video_devdata(filp));
	pdata = to_fimc_plat(ctrl->dev);

	mutex_lock(&ctrl->lock);

	in_use = atomic_read(&ctrl->in_use);
	if (in_use >= FIMC_MAX_CTXS || (in_use && 1 != ctrl->id)) {
		fimc_err("%s: Device busy.\n", __func__);
		ret = -EBUSY;
		goto resource_busy;
	} else {
		atomic_inc(&ctrl->in_use);
	}
	in_use = atomic_read(&ctrl->in_use);

	prv_data = kzalloc(sizeof(struct fimc_prv_data), GFP_KERNEL);
	if (!prv_data) {
		fimc_err("%s: not enough memory\n", __func__);
		ret = -ENOMEM;
		goto kzalloc_err;
	}

	prv_data->ctx_id = fimc_get_free_ctx(ctrl);
	if (prv_data->ctx_id < 0) {
		fimc_err("%s: Context busy flag not reset.\n", __func__);
		ret = -EBUSY;
		goto ctx_err;
	}
	prv_data->ctrl = ctrl;
	filp->private_data = prv_data;

	if (in_use == 1) {
		fimc_clk_en(ctrl, true);

		if (pdata->hw_ver == 0x40)
			fimc_hw_reset_camera(ctrl);

		/* Apply things to interface register */
		fimc_hwset_reset(ctrl);

		if (num_registered_fb > 0) {
			struct fb_info *fbinfo = registered_fb[0];
			ctrl->fb.lcd_hres = (int)fbinfo->var.xres;
			ctrl->fb.lcd_vres = (int)fbinfo->var.yres;
			fimc_info1("%s: fd.lcd_hres=%d fd.lcd_vres=%d\n",
					__func__, ctrl->fb.lcd_hres,
					ctrl->fb.lcd_vres);
		}

		ctrl->mem.curr = ctrl->mem.base;
		ctrl->status = FIMC_STREAMOFF;

		if (0 != ctrl->id)
			fimc_clk_en(ctrl, false);
	}

	mutex_unlock(&ctrl->lock);

	fimc_info1("%s opened.\n", ctrl->name);

	return 0;

ctx_err:
	kfree(prv_data);

kzalloc_err:
	atomic_dec(&ctrl->in_use);

resource_busy:
	mutex_unlock(&ctrl->lock);
	return ret;
}

932 如果是第一次打开，那么需要使能mclk

939 调用fimc_hwset_reset 进行fimc控制器的reset过程951 FIMC会为每一个控制器预分配一段物理内存， mem.base 指向物理内存的起始地址，FIMC在执行DMA之前，需要为DMA分配物理内存，FIMC直接从这个预保留的空间进行分配

mem.curr记录着当前可用空间的起始位置在arch/arm/mach-s5pv210/mach-smdkc110.c中

//#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_FIMC0 (6144 * SZ_1K)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_FIMC0 (24576 * SZ_1K)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_FIMC1 (9900 * SZ_1K)
//#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_FIMC2 (6144 * SZ_1K)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_FIMC2 (24576 * SZ_1K)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_MFC0 (36864 * SZ_1K)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_MFC1 (36864 * SZ_1K)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_FIMD (S5PV210_LCD_WIDTH * \
					     S5PV210_LCD_HEIGHT * 4 * \
					     CONFIG_FB_S3C_NR_BUFFERS)
#define  S5PV210_VIDEO_SAMSUNG_MEMSIZE_JPEG (8192 * SZ_1K)
定义了media device需要的reserved 物理内存大小，物理内存的实际使用可能达不到定义的大小， 
物理内存的使用大小 和图片大小以及queue buffer数量成正比的，也就是说图片分辨率Width x Height越高，queue buffer数量越多，实际使用的物理内存越大
所以这个物理内存大小要根据项目情况具体调整，当然你也可以不调，就是浪费点内存。

1133 struct video_device fimc_video_device[FIMC_DEVICES] = {  
1134     [0] = {  
1135         .fops = &fimc_fops,  
1136         .ioctl_ops = &fimc_v4l2_ops,  
1137         .release = fimc_vdev_release,  
1138     },  
1139     [1] = {  
1140         .fops = &fimc_fops,  
1141         .ioctl_ops = &fimc_v4l2_ops,  
1142         .release = fimc_vdev_release,  
1143     },  
1144     [2] = {  
1145         .fops = &fimc_fops,  
1146         .ioctl_ops = &fimc_v4l2_ops,  
1147         .release = fimc_vdev_release,  
1148     },  
1149 };
FIMC_DEVICES 一共有三个fimc0, fimc1, fimc2设备，  
  
fops定义了设备节点的文件操作函数； ioctl_ops定义了fimc向V4L2提供的所有ioctl操作集合
1310 static int __devinit fimc_probe(struct platform_device *pdev)  
1311 {  
1312     struct s3c_platform_fimc *pdata;  
1313     struct fimc_control *ctrl;  
1314     struct clk *srclk;  
1315     int ret;  
1316  
1317     if (!fimc_dev) {  
1318         fimc_dev = kzalloc(sizeof(*fimc_dev), GFP_KERNEL);  
1319         if (!fimc_dev) {  
1320             dev_err(&pdev->dev, "%s: not enough memory\n",  
1321                 __func__);  
1322             return -ENOMEM;  
1323         }  
1324     }  
1325  
1326     ctrl = fimc_register_controller(pdev);  
1327     if (!ctrl) {  
1328         printk(KERN_ERR "%s: cannot register fimc\n", __func__);  
1329         goto err_alloc;  
1330     }  
1331  
1332     pdata = to_fimc_plat(&pdev->dev);  
1333     if (pdata->cfg_gpio)  
1334         pdata->cfg_gpio(pdev);  
1335  
1336     /* Get fimc power domain regulator */  
1337     ctrl->regulator = regulator_get(&pdev->dev, "pd");  
1338     if (IS_ERR(ctrl->regulator)) {  
1339         fimc_err("%s: failed to get resource %s\n",  
1340                 __func__, "s3c-fimc");  
1341         return PTR_ERR(ctrl->regulator);  
1342     }  
1343  
1344     /* fimc source clock */  
1345     srclk = clk_get(&pdev->dev, pdata->srclk_name);  
1346     if (IS_ERR(srclk)) {  
1347         fimc_err("%s: failed to get source clock of fimc\n",  
1348                 __func__);  
1349         goto err_v4l2;  
1350     }  
1351   
1352     /* fimc clock */  
1353     ctrl->clk = clk_get(&pdev->dev, pdata->clk_name);  
1354     if (IS_ERR(ctrl->clk)) {  
1355         fimc_err("%s: failed to get fimc clock source\n",  
1356             __func__);  
1357         goto err_v4l2;  
1358     }  
1359   
1360     /* set parent for mclk */  
1361     clk_set_parent(ctrl->clk, srclk);  
1362   
1363     /* set rate for mclk */  
1364     clk_set_rate(ctrl->clk, pdata->clk_rate);  
1365   
1366     /* V4L2 device-subdev registration */  
1367     ret = v4l2_device_register(&pdev->dev, &ctrl->v4l2_dev);  
1368     if (ret) {  
1369         fimc_err("%s: v4l2 device register failed\n", __func__);  
1370         goto err_fimc;  
1371     }  
1372   
1373     /* things to initialize once */  
1374     if (!fimc_dev->initialized) {  
1375         ret = fimc_init_global(pdev);  
1376         if (ret)  
1377             goto err_v4l2;  
1378     }  
1379   
1380     /* video device register */  
1381     ret = video_register_device(ctrl->vd, VFL_TYPE_GRABBER, ctrl->id);  
1382     if (ret) {  
1383         fimc_err("%s: cannot register video driver\n", __func__);  
1384         goto err_v4l2;  
1385     }  
1386   
1387     video_set_drvdata(ctrl->vd, ctrl);  
1388   
1389     ret = device_create_file(&(pdev->dev), &dev_attr_log_level);  
1390     if (ret < 0) {  
1391         fimc_err("failed to add sysfs entries\n");  
1392         goto err_global;  
1393     }  
1394     printk(KERN_INFO "FIMC%d registered successfully\n", ctrl->id);  
1395   
1396     return 0;  
1397   
1398 err_global:  
1399     video_unregister_device(ctrl->vd);  
1400   
1401 err_v4l2:  
1402     v4l2_device_unregister(&ctrl->v4l2_dev);  
1403   
1404 err_fimc:  
1405     fimc_unregister_controller(pdev);  
1406   
1407 err_alloc:  
1408     kfree(fimc_dev);  
1409     return -EINVAL;  
1410   
1411 }  
  
1333 ～ 1334 调用平台的gpio设置函数，一般来说，这个用来设置external CameraA/CameraB的输入输出
  
1344 ~ 1364 设置mclk，mclk的频率由sensor的输出图像尺寸， 如果外围sensor自身有晶振，那么CPU不需要对外提供mclk
  
1381 ～ 1385 注册一个video device，会生成设备节点/dev/videoX

lyuncxw

关注

0
点赞
踩
2

收藏

觉得还不错? 一键收藏
1
评论
s5pv210 fimc 之 fimc-dev.c

fimc-dev.c 是Samsung FIMC 设备的V4L2 驱动。上层应用直接操作这个设备，进行capture，图片处理，以及overlay输出[cpp] view plaincopy43 int fimc_dma_alloc(struct fimc_control *ctrl, struct fimc_buf_set *bs, 44
复制链接

扫一扫

专栏目录