fimc_capture.c在FIMC系统中的位置,网上偷来的一幅图片
43 static const struct v4l2_fmtdesc capture_fmts[] = {
44 {
45 .index = 0,
46 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
47 .flags = FORMAT_FLAGS_PACKED,
48 .description = "RGB-5-6-5",
49 .pixelformat = V4L2_PIX_FMT_RGB565,
50 }, {
51 .index = 1,
52 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
53 .flags = FORMAT_FLAGS_PACKED,
54 .description = "RGB-8-8-8, unpacked 24 bpp",
55 .pixelformat = V4L2_PIX_FMT_RGB32,
56 }, {
57 .index = 2,
58 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
59 .flags = FORMAT_FLAGS_PACKED,
60 .description = "YUV 4:2:2 packed, YCbYCr",
61 .pixelformat = V4L2_PIX_FMT_YUYV,
62 }, {
63 .index = 3,
64 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
65 .flags = FORMAT_FLAGS_PACKED,
66 .description = "YUV 4:2:2 packed, CbYCrY",
67 .pixelformat = V4L2_PIX_FMT_UYVY,
68 }, {
69 .index = 4,
70 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
71 .flags = FORMAT_FLAGS_PACKED,
72 .description = "YUV 4:2:2 packed, CrYCbY",
73 .pixelformat = V4L2_PIX_FMT_VYUY,
74 }, {
75 .index = 5,
76 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
77 .flags = FORMAT_FLAGS_PACKED,
78 .description = "YUV 4:2:2 packed, YCrYCb",
79 .pixelformat = V4L2_PIX_FMT_YVYU,
80 }, {
81 .index = 6,
82 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
83 .flags = FORMAT_FLAGS_PLANAR,
84 .description = "YUV 4:2:2 planar, Y/Cb/Cr",
85 .pixelformat = V4L2_PIX_FMT_YUV422P,
86 }, {
87 .index = 7,
88 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
89 .flags = FORMAT_FLAGS_PLANAR,
90 .description = "YUV 4:2:0 planar, Y/CbCr",
91 .pixelformat = V4L2_PIX_FMT_NV12,
92 }, {
93 .index = 8,
94 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
95 .flags = FORMAT_FLAGS_PLANAR,
96 .description = "YUV 4:2:0 planar, Y/CbCr, Tiled",
97 .pixelformat = V4L2_PIX_FMT_NV12T,
98 }, {
99 .index = 9,
100 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
101 .flags = FORMAT_FLAGS_PLANAR,
102 .description = "YUV 4:2:0 planar, Y/CrCb",
103 .pixelformat = V4L2_PIX_FMT_NV21,
104 }, {
105 .index = 10,
106 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
107 .flags = FORMAT_FLAGS_PLANAR,
108 .description = "YUV 4:2:2 planar, Y/CbCr",
109 .pixelformat = V4L2_PIX_FMT_NV16,
110 }, {
111 .index = 11,
112 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
113 .flags = FORMAT_FLAGS_PLANAR,
114 .description = "YUV 4:2:2 planar, Y/CrCb",
115 .pixelformat = V4L2_PIX_FMT_NV61,
116 }, {
117 .index = 12,
118 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
119 .flags = FORMAT_FLAGS_PLANAR,
120 .description = "YUV 4:2:0 planar, Y/Cb/Cr",
121 .pixelformat = V4L2_PIX_FMT_YUV420,
122 }, {
123 .index = 13,
124 .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
125 .flags = FORMAT_FLAGS_ENCODED,
126 .description = "Encoded JPEG bitstream",
127 .pixelformat = V4L2_PIX_FMT_JPEG,
128 },
129 };
这个列表列出了FIMC支持的capture格式,app可以通过vidioc_s_fmt设置capture的输出格式,capture的输出格式必须在上面的列表中
这里的flags标志位并不符合V4L2标准,V4L2只支持一种标志:V4L2_FMT_FLAG_COMPRESSED。
samsung扩展了flags标志:
FORMAT_FLAGS_PACKED: 图片的像素点分量放在一同一个buffer中
FORMAT_FLAGS_PLANAR:图片像素的分量放在不同的buffer中
FORMAT_FLAGS_ENCODED:图片数据编码存储,如jpeg格式
131 static const struct v4l2_queryctrl fimc_controls[] = {
132 {
133 .id = V4L2_CID_ROTATION,
134 .type = V4L2_CTRL_TYPE_BOOLEAN,
135 .name = "Roataion",
136 .minimum = 0,
137 .maximum = 270,
138 .step = 90,
139 .default_value = 0,
140 }, {
141 .id = V4L2_CID_HFLIP,
142 .type = V4L2_CTRL_TYPE_BOOLEAN,
143 .name = "Horizontal Flip",
144 .minimum = 0,
145 .maximum = 1,
146 .step = 1,
147 .default_value = 0,
148 }, {
149 .id = V4L2_CID_VFLIP,
150 .type = V4L2_CTRL_TYPE_BOOLEAN,
151 .name = "Vertical Flip",
152 .minimum = 0,
153 .maximum = 1,
154 .step = 1,
155 .default_value = 0,
156 }, {
157 .id = V4L2_CID_PADDR_Y,
158 .type = V4L2_CTRL_TYPE_BOOLEAN,
159 .name = "Physical address Y",
160 .minimum = 0,
161 .maximum = 1,
162 .step = 1,
163 .default_value = 0,
164 .flags = V4L2_CTRL_FLAG_READ_ONLY,
165 }, {
166 .id = V4L2_CID_PADDR_CB,
167 .type = V4L2_CTRL_TYPE_BOOLEAN,
168 .name = "Physical address Cb",
169 .minimum = 0,
170 .maximum = 1,
171 .step = 1,
172 .default_value = 0,
173 .flags = V4L2_CTRL_FLAG_READ_ONLY,
174 }, {
175 .id = V4L2_CID_PADDR_CR,
176 .type = V4L2_CTRL_TYPE_BOOLEAN,
177 .name = "Physical address Cr",
178 .minimum = 0,
179 .maximum = 1,
180 .step = 1,
181 .default_value = 0,
182 .flags = V4L2_CTRL_FLAG_READ_ONLY,
183 }, {
184 .id = V4L2_CID_PADDR_CBCR,
185 .type = V4L2_CTRL_TYPE_BOOLEAN,
186 .name = "Physical address CbCr",
187 .minimum = 0,
188 .maximum = 1,
189 .step = 1,
190 .default_value = 0,
191 .flags = V4L2_CTRL_FLAG_READ_ONLY,
192 },
193 };
定义了FIMC支持的ctrl,后面四个ctrl: V4L2_CID_PADDR_Y, V4L2_CID_PADDR_CB, V4L2_CID_PADDR_CR, V4L2_CID_PADDR_CBCR 是samsung fimc私有的ctrl id, 用来获取分量的物理起始地址。
201 static int fimc_camera_init(struct fimc_control *ctrl)
202 {
203 int ret;
204
205 fimc_dbg("%s\n", __func__);
206
207 /* do nothing if already initialized */
208 if (ctrl->cam->initialized)
209 return 0;
210
211 /* enable camera power if needed */
212 if (ctrl->cam->cam_power)
213 ctrl->cam->cam_power(1);
214
215 /* subdev call for init */
216 ret = subdev_call(ctrl, core, init, 0);
217 if (ret == -ENOIOCTLCMD) {
218 fimc_err("%s: init subdev api not supported\n",
219 __func__);
220 return ret;
221 }
222
223 if (ctrl->cam->type == CAM_TYPE_MIPI) {
224 /* subdev call for sleep/wakeup:
225 * no error although no s_stream api support
226 */
227 u32 pixelformat;
228 if (ctrl->cap->fmt.pixelformat == V4L2_PIX_FMT_JPEG)
229 pixelformat = V4L2_PIX_FMT_JPEG;
230 else
231 pixelformat = ctrl->cam->pixelformat;
232
233 subdev_call(ctrl, video, s_stream, 0);
234 s3c_csis_start(ctrl->cam->mipi_lanes, ctrl->cam->mipi_settle, \
235 ctrl->cam->mipi_align, ctrl->cam->width, \
236 ctrl->cam->height, pixelformat);
237 subdev_call(ctrl, video, s_stream, 1);
238 }
239
240 ctrl->cam->initialized = 1;
241
242 return 0;
243 }
这个函数主要对camera的sensor进行上电,初始化,这个函数最早的调用位置是streamon。
但是有一个问题,假定外围电路是一个video AD转换芯片托多个cvbs s-video或者YPbPr输入,那么在执行streamon之前,要首先执行s_input操作选择哪个video AD芯片的输入。选择video AD 的input输入是要操作AD芯片I2C寄存器的,因此这个上电位置是有问题的。
368 static int fimc_add_inqueue(struct fimc_control *ctrl, int i)
369 {
370 struct fimc_capinfo *cap = ctrl->cap;
371
372 struct fimc_buf_set *buf;
373
374 if (i >= cap->nr_bufs)
375 return -EINVAL;
376
377 list_for_each_entry(buf, &cap->inq, list) {
378 if (buf->id == i) {
379 fimc_dbg("%s: buffer %d already in inqueue.\n", \
380 __func__, i);
381 return -EINVAL;
382 }
383 }
384
385 list_add_tail(&cap->bufs[i].list, &cap->inq);
386
387 return 0;
388 }
这个函数被qbuf调用,把@i指定的buffer加到cap->inq链表中
cap->inq是可用buffer链表,当FIMC更新out DMA address时,就设置为cap->inq中的一个buffer
390 static int fimc_add_outqueue(struct fimc_control *ctrl, int i)
391 {
392 struct fimc_capinfo *cap = ctrl->cap;
393 struct fimc_buf_set *buf;
394
395 unsigned int mask = 0x2;
396
397 /* PINGPONG_2ADDR_MODE Only */
398 /* pair_buf_index stands for pair index of i. (0<->2) (1<->3) */
399
400 int pair_buf_index = (i^mask);
401
402 /* FIMC have 4 h/w registers */
403 if (i < 0 || i >= FIMC_PHYBUFS) {
404 fimc_err("%s: invalid queue index : %d\n", __func__, i);
405 return -ENOENT;
406 }
407
408 if (list_empty(&cap->inq))
409 return -ENOENT;
410
411 buf = list_first_entry(&cap->inq, struct fimc_buf_set, list);
412
413 /* pair index buffer should be allocated first */
414 cap->outq[pair_buf_index] = buf->id;
415 fimc_hwset_output_address(ctrl, buf, pair_buf_index);
416
417 cap->outq[i] = buf->id;
418 fimc_hwset_output_address(ctrl, buf, i);
419
420 if (cap->nr_bufs != 1)
421 list_del(&buf->list);
422
423 return 0;
424 }
411 在cap->inq buffer链表中取得第一个可用buffer
413 ~ 418 一直没明白为什么这里把buf设置到两个输出out DMA address寄存器中,华清远见有篇文档http://www.embedu.org/Column/Column457.htm对这个代码的解释是说最多可以把四个out DMA address都配置上,可以增加画面的流畅度。
我原来也是同意华清讲师的说法的,四个output DMA address把帧数分成四个部分,第一个DMA address存储 1, 5, 9, 13... 帧, 第二个DMA address存储2, 6, 10, 14...帧, 第三个存储3, 7, 11, 15...帧, 第四个存储4, 8, 12, 16...帧,如果仅使用一个output DMA address,那么仅能得到1/4的帧率。
但是测试后发现,删除414~415后重新编译的内核没发现有帧率的变化,对帧率没有任何影响。
420 ~ 421 从cap->inq 链表中删除这个buf
516 int fimc_enum_input(struct file *file, void *fh, struct v4l2_input *inp)
517 {
518 struct fimc_global *fimc = get_fimc_dev();
519 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
520
521 fimc_dbg("%s: index %d\n", __func__, inp->index);
522
523 if (inp->index < 0 || inp->index >= FIMC_MAXCAMS) {
524 fimc_err("%s: invalid input index, received = %d\n", \
525 __func__, inp->index);
526 return -EINVAL;
527 }
528
529 if (!fimc->camera_isvalid[inp->index])
530 return -EINVAL;
531
532 strcpy(inp->name, fimc->camera[inp->index].info->type);
533 inp->type = V4L2_INPUT_TYPE_CAMERA;
534
535 return 0;
536 }
我觉得fimc应该把ENUMINPUT ioctl调用传递给sensor驱动实现,毕竟std, status甚至name,是隶属于sensor的特性,fimc不该管理这些信息,管理就破坏了fimc驱动的通用性。
538 int fimc_g_input(struct file *file, void *fh, unsigned int *i)
539 {
540 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
541 struct fimc_global *fimc = get_fimc_dev();
542
543 /* In case of isueing g_input before s_input */
544 if (!ctrl->cam) {
545 fimc_err("no camera device selected yet!" \
546 "do VIDIOC_S_INPUT first\n");
547 return -ENODEV;
548 }
549
550 *i = (unsigned int) fimc->active_camera;
551
552 fimc_dbg("%s: index %d\n", __func__, *i);
553
554 return 0;
555 }
与fimc_enum_input不同,fimc_g_input可以完全由fimc驱动实现,毕竟这个函数仅仅返回current input的编号,这个编号应该算是隶属于video设备@file的一个特性。
637 int fimc_s_input(struct file *file, void *fh, unsigned int i)
638 {
639 struct fimc_global *fimc = get_fimc_dev();
640 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
641 int ret = 0;
642
643 fimc_dbg("%s: index %d\n", __func__, i);
644
645 if (i < 0 || i >= FIMC_MAXCAMS) {
646 fimc_err("%s: invalid input index\n", __func__);
647 return -EINVAL;
648 }
649
650 if (!fimc->camera_isvalid[i])
651 return -EINVAL;
652
653 if (fimc->camera[i].sd && ctrl->id != 2) {
654 fimc_err("%s: Camera already in use.\n", __func__);
655 return -EBUSY;
656 }
657
658 mutex_lock(&ctrl->v4l2_lock);
659 /* If ctrl->cam is not NULL, there is one subdev already registered.
660 * We need to unregister that subdev first.
661 */
662 if (i != fimc->active_camera) {
663 fimc_release_subdev(ctrl);
664 ctrl->cam = &fimc->camera[i];
665 ret = fimc_configure_subdev(ctrl);
666 if (ret < 0) {
667 mutex_unlock(&ctrl->v4l2_lock);
668 fimc_err("%s: Could not register camera sensor "
669 "with V4L2.\n", __func__);
670 return -ENODEV;
671 }
672 fimc->active_camera = i;
673 }
674
675 if (ctrl->id == 2) {
676 if (i == fimc->active_camera) {
677 ctrl->cam = &fimc->camera[i];
678 } else {
679 mutex_unlock(&ctrl->v4l2_lock);
680 return -EINVAL;
681 }
682 }
683
684 mutex_unlock(&ctrl->v4l2_lock);
685
686 return 0;
687 }
这个函数选择@file指定的video设备的input路径,我的理解是s_input必须要有sensor驱动参与,这里的实现并没有调用sensor的接口
897 static int fimc_alloc_buffers(struct fimc_control *ctrl, int size[], int align)
898 {
899 struct fimc_capinfo *cap = ctrl->cap;
900 int i, plane;
901
902 for (i = 0; i < cap->nr_bufs; i++) {
903 for (plane = 0; plane < 4; plane++) {
904 cap->bufs[i].length[plane] = size[plane];
905 if (!cap->bufs[i].length[plane])
906 continue;
907
908 fimc_dma_alloc(ctrl, &cap->bufs[i], plane, align);
909
910 if (!cap->bufs[i].base[plane])
911 goto err_alloc;
912 }
913
914 cap->bufs[i].state = VIDEOBUF_PREPARED;
915 cap->bufs[i].id = i;
916 }
917
918 return 0;
919
920 err_alloc:
921 for (i = 0; i < cap->nr_bufs; i++) {
922 if (cap->bufs[i].base[plane])
923 fimc_dma_free(ctrl, &cap->bufs[i], plane);
924
925 memset(&cap->bufs[i], 0, sizeof(cap->bufs[i]));
926 }
927
928 return -ENOMEM;
929 }
分配queue buffer
@align:queue buffer是DMA buffer,所以会有alignment要求
@size:不同的format,每帧需要的子buffers数目不同,这个函数的plane就代表需要的子buffers数目,size[]是一个数组,表示queue buffers的每个子buffer需求的尺寸
902 cap->nr_bufs,是capture总的queue buffers数量。
950 int fimc_reqbufs_capture(void *fh, struct v4l2_requestbuffers *b)
951 {
952 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
953 struct fimc_capinfo *cap = ctrl->cap;
954 int ret = 0, i;
955 int size[4] = { 0, 0, 0, 0};
956 int align = SZ_4K;
957
958 if (b->memory != V4L2_MEMORY_MMAP) {
959 fimc_err("%s: invalid memory type\n", __func__);
960 return -EINVAL;
961 }
962
963 if (!cap) {
964 fimc_err("%s: no capture device info\n", __func__);
965 return -ENODEV;
966 }
967
968 if (!ctrl->cam || !ctrl->cam->sd) {
969 fimc_err("%s: No capture device.\n", __func__);
970 return -ENODEV;
971 }
972
973 mutex_lock(&ctrl->v4l2_lock);
974
975 if (b->count < 1 || b->count > FIMC_CAPBUFS)
976 return -EINVAL;
977
978 /* It causes flickering as buf_0 and buf_3 refer to same hardware
979 * address.
980 */
981 if (b->count == 3)
982 b->count = 4;
983
984 cap->nr_bufs = b->count;
985
986 fimc_dbg("%s: requested %d buffers\n", __func__, b->count);
987
988 INIT_LIST_HEAD(&cap->inq);
989
990 fimc_free_buffers(ctrl);
991
992 switch (cap->fmt.pixelformat) {
993 case V4L2_PIX_FMT_RGB32: /* fall through */
994 case V4L2_PIX_FMT_RGB565: /* fall through */
995 case V4L2_PIX_FMT_YUYV: /* fall through */
996 case V4L2_PIX_FMT_UYVY: /* fall through */
997 case V4L2_PIX_FMT_VYUY: /* fall through */
998 case V4L2_PIX_FMT_YVYU: /* fall through */
999 case V4L2_PIX_FMT_YUV422P: /* fall through */
1000 size[0] = cap->fmt.sizeimage;
1001 break;
1002
1003 case V4L2_PIX_FMT_NV16: /* fall through */
1004 case V4L2_PIX_FMT_NV61:
1005 size[0] = cap->fmt.width * cap->fmt.height;
1006 size[1] = cap->fmt.width * cap->fmt.height;
1007 size[3] = 16; /* Padding buffer */
1008 break;
1009 case V4L2_PIX_FMT_NV12:
1010 size[0] = cap->fmt.width * cap->fmt.height;
1011 size[1] = cap->fmt.width * cap->fmt.height/2;
1012 break;
1013 case V4L2_PIX_FMT_NV21:
1014 size[0] = cap->fmt.width * cap->fmt.height;
1015 size[1] = cap->fmt.width * cap->fmt.height/2;
1016 size[3] = 16; /* Padding buffer */
1017 break;
1018 case V4L2_PIX_FMT_NV12T:
1019 /* Tiled frame size calculations as per 4x2 tiles
1020 * - Width: Has to be aligned to 2 times the tile width
1021 * - Height: Has to be aligned to the tile height
1022 * - Alignment: Has to be aligned to the size of the
1023 * macrotile (size of 4 tiles)
1024 *
1025 * NOTE: In case of rotation, we need modified calculation as
1026 * width and height are aligned to different values.
1027 */
1028 if (cap->rotate == 90 || cap->rotate == 270) {
1029 size[0] = ALIGN(ALIGN(cap->fmt.height, 128) *
1030 ALIGN(cap->fmt.width, 32),
1031 SZ_8K);
1032 size[1] = ALIGN(ALIGN(cap->fmt.height, 128) *
1033 ALIGN(cap->fmt.width/2, 32),
1034 SZ_8K);
1035 } else {
1036 size[0] = ALIGN(ALIGN(cap->fmt.width, 128) *
1037 ALIGN(cap->fmt.height, 32),
1038 SZ_8K);
1039 size[1] = ALIGN(ALIGN(cap->fmt.width, 128) *
1040 ALIGN(cap->fmt.height/2, 32),
1041 SZ_8K);
1042 }
1043 align = SZ_8K;
1044 break;
1045
1046 case V4L2_PIX_FMT_YUV420:
1047 size[0] = cap->fmt.width * cap->fmt.height;
1048 size[1] = cap->fmt.width * cap->fmt.height >> 2;
1049 size[2] = cap->fmt.width * cap->fmt.height >> 2;
1050 size[3] = 16; /* Padding buffer */
1051 break;
1052
1053 case V4L2_PIX_FMT_JPEG:
1054 size[0] = fimc_camera_get_jpeg_memsize(ctrl);
1055 default:
1056 break;
1057 }
1058
1059 ret = fimc_alloc_buffers(ctrl, size, align);
1060 if (ret) {
1061 fimc_err("%s: no memory for "
1062 "capture buffer\n", __func__);
1063 mutex_unlock(&ctrl->v4l2_lock);
1064 return -ENOMEM;
1065 }
1066
1067 for (i = cap->nr_bufs; i < FIMC_PHYBUFS; i++) {
1068 memcpy(&cap->bufs[i], \
1069 &cap->bufs[i - cap->nr_bufs], sizeof(cap->bufs[i]));
1070 }
1071
1072 mutex_unlock(&ctrl->v4l2_lock);
1073
1074 return 0;
1075 }
975 ~978 FIMC_CAPBUFS是fimc支持的最大queue buffers数量,可以根据最大capture buffers数目,以及帧buffer所需空间大小(所有子buffers空间总和),加上alignment所带来的空间损失,大致算出fimc capture设备需要预留的物理空间
992 ~ 1057 根据pixelformat和width/height计算每个帧子buffers的尺寸。
1077 int fimc_querybuf_capture(void *fh, struct v4l2_buffer *b)
1078 {
1079 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
1080
1081 if (!ctrl->cap || !ctrl->cap->bufs) {
1082 fimc_err("%s: no capture device info\n", __func__);
1083 return -ENODEV;
1084 }
1085
1086 if (ctrl->status != FIMC_STREAMOFF) {
1087 fimc_err("fimc is running\n");
1088 return -EBUSY;
1089 }
1090
1091 mutex_lock(&ctrl->v4l2_lock);
1092
1093 b->length = ctrl->cap->bufs[b->index].length[FIMC_ADDR_Y]
1094 + ctrl->cap->bufs[b->index].length[FIMC_ADDR_CB]
1095 + ctrl->cap->bufs[b->index].length[FIMC_ADDR_CR];
1096
1097 b->m.offset = b->index * PAGE_SIZE;
1098
1099 ctrl->cap->bufs[b->index].state = VIDEOBUF_IDLE;
1100
1101 mutex_unlock(&ctrl->v4l2_lock);
1102
1103 fimc_dbg("%s: %d bytes at index: %d\n", __func__, b->length, b->index);
1104
1105 return 0;
1106 }
1093 ~ 1095 buffer的length由三个分量buffer总长度决定
1097 这个需要结合fimc_mmap_cap来看,b->m.offset可以用来表示buffer的索引值
1255 int fimc_cropcap_capture(void *fh, struct v4l2_cropcap *a)
1256 {
1257 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
1258 struct fimc_capinfo *cap = ctrl->cap;
1259
1260 fimc_dbg("%s\n", __func__);
1261
1262 if (!ctrl->cam || !ctrl->cam->sd || !ctrl->cap) {
1263 fimc_err("%s: No capture device.\n", __func__);
1264 return -ENODEV;
1265 }
1266
1267 mutex_lock(&ctrl->v4l2_lock);
1268
1269 /* crop limitations */
1270 cap->cropcap.bounds.left = 0;
1271 cap->cropcap.bounds.top = 0;
1272 cap->cropcap.bounds.width = ctrl->cam->width;
1273 cap->cropcap.bounds.height = ctrl->cam->height;
1274
1275 /* crop default values */
1276 cap->cropcap.defrect.left = 0;
1277 cap->cropcap.defrect.top = 0;
1278 cap->cropcap.defrect.width = ctrl->cam->width;
1279 cap->cropcap.defrect.height = ctrl->cam->height;
1280
1281 a->bounds = cap->cropcap.bounds;
1282 a->defrect = cap->cropcap.defrect;
1283
1284 mutex_unlock(&ctrl->v4l2_lock);
1285
1286 return 0;
1287 }
fimc_cropcap_capture:fimc的VIDIOC_CROPCAP的实现
cropcap.bounds 是capture window 最大边界,capture.defrect是capture window的默认方框
cropcap.defrect一定不会超出cropcap.bounds的范围,他们的关系如下图
cropcap.pixelaspect =垂直像素数 / 水平像素数
1289 int fimc_g_crop_capture(void *fh, struct v4l2_crop *a)
1290 {
1291 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl;
1292
1293 fimc_dbg("%s\n", __func__);
1294
1295 if (!ctrl->cap) {
1296 fimc_err("%s: No capture device.\n", __func__);
1297 return -ENODEV;
1298 }
1299
1300 mutex_lock(&ctrl->v4l2_lock);
1301 a->c = ctrl->cap->crop;
1302 mutex_unlock(&ctrl->v4l2_lock);
1303
1304 return 0;
1305 }
1306
fimc_g_crop_capture 是capture设备的VIDIOC_G_CROP实现,返回当前的crop
1307 static int fimc_capture_crop_size_check(struct fimc_control *ctrl) 1308 { 1309 struct fimc_capinfo *cap = ctrl->cap; 1310 int win_hor_offset = 0, win_hor_offset2 = 0; 1311 int win_ver_offset = 0, win_ver_offset2 = 0; 1312 int crop_width = 0, crop_height = 0; 1313 1314 /* check win_hor_offset, win_hor_offset2 */ 1315 win_hor_offset = ctrl->cam->window.left; 1316 win_hor_offset2 = ctrl->cam->width - ctrl->cam->window.left - 1317 ctrl->cam->window.width; 1318 1319 win_ver_offset = ctrl->cam->window.top; 1320 win_ver_offset2 = ctrl->cam->height - ctrl->cam->window.top - 1321 ctrl->cam->window.height; 1322 1323 if (win_hor_offset < 0 || win_hor_offset2 < 0) { 1324 fimc_err("%s: Offset (left-side(%d) or right-side(%d) " 1325 "is negative.\n", __func__, \ 1326 win_hor_offset, win_hor_offset2); 1327 return -1; 1328 } 1329 1330 if (win_ver_offset < 0 || win_ver_offset2 < 0) { 1331 fimc_err("%s: Offset (top-side(%d) or bottom-side(%d)) " 1332 "is negative.\n", __func__, \ 1333 win_ver_offset, win_ver_offset2); 1334 return -1; 1335 } 1336 1337 if ((win_hor_offset % 2) || (win_hor_offset2 % 2)) { 1338 fimc_err("%s: win_hor_offset must be multiple of 2\n", \ 1339 __func__); 1340 return -1; 1341 } 1342 1343 /* check crop_width, crop_height */ 1344 crop_width = ctrl->cam->window.width; 1345 crop_height = ctrl->cam->window.height; 1346 1347 if (crop_width % 16) { 1348 fimc_err("%s: crop_width must be multiple of 16\n", __func__); 1349 return -1; 1350 } 1351 1352 switch (cap->fmt.pixelformat) { 1353 case V4L2_PIX_FMT_YUV420: /* fall through */ 1354 case V4L2_PIX_FMT_NV12: /* fall through */ 1355 case V4L2_PIX_FMT_NV21: /* fall through */ 1356 case V4L2_PIX_FMT_NV12T: /* fall through */ 1357 if ((crop_height % 2) || (crop_height < 8)) { 1358 fimc_err("%s: crop_height error!\n", __func__); 1359 return -1; 1360 } 1361 break; 1362 default: 1363 break; 1364 } 1365 1366 return 0; 1367 }
cam->cam->window是crop设置后的取景框,这个函数就是检测这个取景框是否符合规范
1377 static void fimc_capture_update_crop_window(struct fimc_control *ctrl) 1378 { 1379 unsigned int zoom_hor = 0; 1380 unsigned int zoom_ver = 0; 1381 unsigned int multiplier = 1024; 1382 1383 if (!ctrl->cam->width || !ctrl->cam->height) 1384 return; 1385 1386 zoom_hor = ctrl->cap->fmt.width * multiplier / ctrl->cam->width; 1387 zoom_ver = ctrl->cap->fmt.height * multiplier / ctrl->cam->height; 1388 1389 if (!zoom_hor || !zoom_ver) 1390 return; 1391 1392 /* Width */ 1393 ctrl->cam->window.width = ctrl->cap->crop.width * multiplier / zoom_hor; 1394 if (ctrl->cam->window.width > ctrl->cam->width) 1395 ctrl->cam->window.width = ctrl->cam->width; 1396 if (ctrl->cam->window.width % 16) 1397 ctrl->cam->window.width = 1398 (ctrl->cam->window.width + 0xF) & ~0xF; 1399 1400 /* Left offset */ 1401 ctrl->cam->window.left = ctrl->cap->crop.left * multiplier / zoom_hor; 1402 if (ctrl->cam->window.width + ctrl->cam->window.left > ctrl->cam->width) 1403 ctrl->cam->window.left = 1404 (ctrl->cam->width - ctrl->cam->window.width)/2; 1405 if (ctrl->cam->window.left % 2) 1406 ctrl->cam->window.left--; 1407 1408 /* Height */ 1409 ctrl->cam->window.height = 1410 (ctrl->cap->crop.height * multiplier) / zoom_ver; 1411 if (ctrl->cam->window.top > ctrl->cam->height) 1412 ctrl->cam->window.height = ctrl->cam->height; 1413 if (ctrl->cam->window.height % 2) 1414 ctrl->cam->window.height--; 1415 1416 /* Top offset */ 1417 ctrl->cam->window.top = ctrl->cap->crop.top * multiplier / zoom_ver; 1418 if (ctrl->cam->window.height + ctrl->cam->window.top > 1419 ctrl->cam->height) 1420 ctrl->cam->window.top = 1421 (ctrl->cam->height - ctrl->cam->window.height)/2; 1422 if (ctrl->cam->window.top % 2) 1423 ctrl->cam->window.top--; 1424 1425 fimc_dbg("Cam (%dx%d) Crop: (%d %d %d %d) Win: (%d %d %d %d)\n", \ 1426 ctrl->cam->width, ctrl->cam->height, \ 1427 ctrl->cap->crop.left, ctrl->cap->crop.top, \ 1428 ctrl->cap->crop.width, ctrl->cap->crop.height, \ 1429 ctrl->cam->window.left, ctrl->cam->window.top, \ 1430 ctrl->cam->window.width, ctrl->cam->window.height); 1431 1432 }
根据s_crop设置的curr_crop设置capture 的取景框
fimc_s_crop_capture是capture设备的VIDIOC_S_CROP ioctl实现1434 int fimc_s_crop_capture(void *fh, struct v4l2_crop *a) 1435 { 1436 struct fimc_control *ctrl = ((struct fimc_prv_data *)fh)->ctrl; 1437 int ret = 0; 1438 1439 fimc_dbg("%s\n", __func__); 1440 1441 if (!ctrl->cap) { 1442 fimc_err("%s: No capture device.\n", __func__); 1443 return -ENODEV; 1444 } 1445 1446 mutex_lock(&ctrl->v4l2_lock); 1447 ctrl->cap->crop = a->c; 1448 1449 fimc_capture_update_crop_window(ctrl); 1450 1451 ret = fimc_capture_crop_size_check(ctrl); 1452 if (ret < 0) { 1453 mutex_unlock(&ctrl->v4l2_lock); 1454 fimc_err("%s: Invalid crop parameters.\n", __func__); 1455 return -EINVAL; 1456 } 1457 1458 if (ctrl->status == FIMC_STREAMON && 1459 ctrl->cap->fmt.pixelformat != V4L2_PIX_FMT_JPEG) { 1460 fimc_hwset_shadow_disable(ctrl); 1461 fimc_hwset_camera_offset(ctrl); 1462 fimc_capture_scaler_info(ctrl); 1463 fimc_hwset_prescaler(ctrl, &ctrl->sc); 1464 fimc_hwset_scaler(ctrl, &ctrl->sc); 1465 fimc_hwset_shadow_enable(ctrl); 1466 } 1467 1468 mutex_unlock(&ctrl->v4l2_lock); 1469 1470 return 0; 1471 }
1449 用@a更新capture window
1451 检测新生成的capture window参数合法性
1458 ~ 1466 FIMC支持streamon正在进行时,修改capture取景框