文章目录
前言
zkCli.cmd 脚本启动了客户端，建立了跟服务端的连接后
提示：以下是本篇文章正文内容，下面案例可供参考
一、ZooKeeperMain
1、 processZKCmd
这个方法里面，处理zkCli.cmd的命令，针对不同的命令 调用Zookeeper对象的不同方法
if (cmd.equals("create") && args.length >= 3) {
int first = 0;
CreateMode flags = CreateMode.PERSISTENT;
if ((args[1].equals("-e") && args[2].equals("-s"))
|| (args[1]).equals("-s") && (args[2].equals("-e"))) {
first+=2;
flags = CreateMode.EPHEMERAL_SEQUENTIAL;
} else if (args[1].equals("-e")) {
first++;
flags = CreateMode.EPHEMERAL;
} else if (args[1].equals("-s")) {
first++;
flags = CreateMode.PERSISTENT_SEQUENTIAL;
}
if (args.length == first + 4) {
acl = parseACLs(args[first+3]);
}
path = args[first + 1];
String newPath = zk.create(path, args[first+2].getBytes(), acl,
flags);
System.err.println("Created " + newPath);
}
二、ZooKeeper对象
1.ZooKeeper对象创建流程
ZooKeeperMain处理客户端命令实际调用了Zookeeper这个类(是的框架叫这个名，同时也有一个这样的类)这个Zookeeper对象在启动脚本的时候已经创建了
setlocal
call "%~dp0zkEnv.cmd"
set ZOOMAIN=org.apache.zookeeper.ZooKeeperMain
call %JAVA% "-Dzookeeper.log.dir=%ZOO_LOG_DIR%" "-Dzookeeper.root.logger=%ZOO_LOG4J_PROP%" -cp "%CLASSPATH%" %ZOOMAIN% %*
endlocal
执行脚本的时候调用到ZooKeeperMain ，也就是执行ZooKeeperMain的main方法
// ZooKeeperMain
public static void main(String args[])
throws KeeperException, IOException, InterruptedException
{
ZooKeeperMain main = new ZooKeeperMain(args);
main.run();
}
public ZooKeeperMain(String args[]) throws IOException, InterruptedException {
cl.parseOptions(args);
System.out.println("Connecting to " + cl.getOption("server"));
connectToZK(cl.getOption("server"));
//zk = new ZooKeeper(cl.getOption("server"),
// Integer.parseInt(cl.getOption("timeout")), new MyWatcher());
}
这里调用到connectToZK方法，创建一个Zookeeper对象
protected void connectToZK(String newHost) throws InterruptedException, IOException {
if (zk != null && zk.getState().isAlive()) {
zk.close();
}
host = newHost;
boolean readOnly = cl.getOption("readonly") != null;
zk = new ZooKeeper(host,
Integer.parseInt(cl.getOption("timeout")),
new MyWatcher(), readOnly);
}
public ZooKeeper(String connectString, int sessionTimeout, Watcher watcher,
boolean canBeReadOnly)
throws IOException
{
LOG.info("Initiating client connection, connectString=" + connectString
+ " sessionTimeout=" + sessionTimeout + " watcher=" + watcher);
watchManager.defaultWatcher = watcher;
ConnectStringParser connectStringParser = new ConnectStringParser(
connectString);
HostProvider hostProvider = new StaticHostProvider(
connectStringParser.getServerAddresses());
cnxn = createConnection(connectStringParser.getChrootPath(),
hostProvider, sessionTimeout, this, watchManager,
getClientCnxnSocket(), canBeReadOnly);
cnxn.start();
}
ZooKeeper 构造函数里面又创建了一个ClientCnxn 对象，这里面有SendThread EventThread 两个线程，cnxn.start()启动了这两个线程，这里我们可以猜测，客户端主要干活的就这两线程了
// ClientCnxn
public ClientCnxn(String chrootPath, HostProvider hostProvider, int sessionTimeout, ZooKeeper zooKeeper,
ClientWatchManager watcher, ClientCnxnSocket clientCnxnSocket,
long sessionId, byte[] sessionPasswd, boolean canBeReadOnly) {
this.zooKeeper = zooKeeper;
this.watcher = watcher;
this.sessionId = sessionId;
this.sessionPasswd = sessionPasswd;
this.sessionTimeout = sessionTimeout;
this.hostProvider = hostProvider;
this.chrootPath = chrootPath;
connectTimeout = sessionTimeout / hostProvider.size();
readTimeout = sessionTimeout * 2 / 3;
readOnly = canBeReadOnly;
sendThread = new SendThread(clientCnxnSocket);
eventThread = new EventThread();
}
2、提交命令流程
// ZooKeeper
public String create(final String path, byte data[], List<ACL> acl,
CreateMode createMode)
throws KeeperException, InterruptedException
{
final String clientPath = path;
PathUtils.validatePath(clientPath, createMode.isSequential());
final String serverPath = prependChroot(clientPath);
RequestHeader h = new RequestHeader();
h.setType(ZooDefs.OpCode.create);
CreateRequest request = new CreateRequest();
CreateResponse response = new CreateResponse();
request.setData(data);
request.setFlags(createMode.toFlag());
request.setPath(serverPath);
if (acl != null && acl.size() == 0) {
throw new KeeperException.InvalidACLException();
}
request.setAcl(acl);
ReplyHeader r = cnxn.submitRequest(h, request, response, null);
if (r.getErr() != 0) {
throw KeeperException.create(KeeperException.Code.get(r.getErr()),
clientPath);
}
if (cnxn.chrootPath == null) {
return response.getPath();
} else {
return response.getPath().substring(cnxn.chrootPath.length());
}
}
// ClientCnxn 将请求包装成Packet添加到待发送队列里面outgoingQueue
public ReplyHeader submitRequest(RequestHeader h, Record request,
Record response, WatchRegistration watchRegistration)
throws InterruptedException {
ReplyHeader r = new ReplyHeader();
Packet packet = queuePacket(h, r, request, response, null, null, null,
null, watchRegistration);
synchronized (packet) {
while (!packet.finished) {
packet.wait();
}
}
return r;
}
三、ClientCnxn
这里类里面真正负责跟服务端的通信以及服务端响应消息的处理，分别对应到SendThread EventThread 两个线程
SendThread
这个线程负责发送客户端命令到服务端
1、run方法
public void run() {
clientCnxnSocket.introduce(this,sessionId);
clientCnxnSocket.updateNow();
clientCnxnSocket.updateLastSendAndHeard();
int to;
long lastPingRwServer = Time.currentElapsedTime();
final int MAX_SEND_PING_INTERVAL = 10000; //10 seconds
InetSocketAddress serverAddress = null;
while (state.isAlive()) {
try {
if (!clientCnxnSocket.isConnected()) {
if(!isFirstConnect){
try {
Thread.sleep(r.nextInt(1000));
} catch (InterruptedException e) {
LOG.warn("Unexpected exception", e);
}
}
// don't re-establish connection if we are closing
if (closing || !state.isAlive()) {
break;
}
if (rwServerAddress != null) {
serverAddress = rwServerAddress;
rwServerAddress = null;
} else {
// 随机拿一个服务器地址 顺序轮询
serverAddress = hostProvider.next(1000);
}
startConnect(serverAddress);
clientCnxnSocket.updateLastSendAndHeard();
}
if (state.isConnected()) {
// determine whether we need to send an AuthFailed event.
if (zooKeeperSaslClient != null) {
boolean sendAuthEvent = false;
if (zooKeeperSaslClient.getSaslState() == ZooKeeperSaslClient.SaslState.INITIAL) {
try {
zooKeeperSaslClient.initialize(ClientCnxn.this);
} catch (SaslException e) {
LOG.error("SASL authentication with Zookeeper Quorum member failed: " + e);
state = States.AUTH_FAILED;
sendAuthEvent = true;
}
}
KeeperState authState = zooKeeperSaslClient.getKeeperState();
if (authState != null) {
if (authState == KeeperState.AuthFailed) {
// An authentication error occurred during authentication with the Zookeeper Server.
state = States.AUTH_FAILED;
sendAuthEvent = true;
} else {
if (authState == KeeperState.SaslAuthenticated) {
sendAuthEvent = true;
}
}
}
if (sendAuthEvent == true) {
eventThread.queueEvent(new WatchedEvent(
Watcher.Event.EventType.None,
authState,null));
}
}
to = readTimeout - clientCnxnSocket.getIdleRecv();
} else {
to = connectTimeout - clientCnxnSocket.getIdleRecv();
}
if (to <= 0) {
String warnInfo;
warnInfo = "Client session timed out, have not heard from server in "
+ clientCnxnSocket.getIdleRecv()
+ "ms"
+ " for sessionid 0x"
+ Long.toHexString(sessionId);
LOG.warn(warnInfo);
throw new SessionTimeoutException(warnInfo);
}
if (state.isConnected()) {
//1000(1 second) is to prevent race condition missing to send the second ping
//also make sure not to send too many pings when readTimeout is small
int timeToNextPing = readTimeout / 2 - clientCnxnSocket.getIdleSend() -
((clientCnxnSocket.getIdleSend() > 1000) ? 1000 : 0);
//send a ping request either time is due or no packet sent out within MAX_SEND_PING_INTERVAL
if (timeToNextPing <= 0 || clientCnxnSocket.getIdleSend() > MAX_SEND_PING_INTERVAL) {
sendPing();
clientCnxnSocket.updateLastSend();
} else {
if (timeToNextPing < to) {
to = timeToNextPing;
}
}
}
// If we are in read-only mode, seek for read/write server
if (state == States.CONNECTEDREADONLY) {
long now = Time.currentElapsedTime();
int idlePingRwServer = (int) (now - lastPingRwServer);
if (idlePingRwServer >= pingRwTimeout) {
lastPingRwServer = now;
idlePingRwServer = 0;
pingRwTimeout =
Math.min(2*pingRwTimeout, maxPingRwTimeout);
pingRwServer();
}
to = Math.min(to, pingRwTimeout - idlePingRwServer);
}
clientCnxnSocket.doTransport(to, pendingQueue, outgoingQueue, ClientCnxn.this);
} catch (Throwable e) {
if (closing) {
if (LOG.isDebugEnabled()) {
// closing so this is expected
LOG.debug("An exception was thrown while closing send thread for session 0x"
+ Long.toHexString(getSessionId())
+ " : " + e.getMessage());
}
break;
} else {
// this is ugly, you have a better way speak up
if (e instanceof SessionExpiredException) {
LOG.info(e.getMessage() + ", closing socket connection");
} else if (e instanceof SessionTimeoutException) {
LOG.info(e.getMessage() + RETRY_CONN_MSG);
} else if (e instanceof EndOfStreamException) {
LOG.info(e.getMessage() + RETRY_CONN_MSG);
} else if (e instanceof RWServerFoundException) {
LOG.info(e.getMessage());
} else if (e instanceof SocketException) {
LOG.info("Socket error occurred: {}: {}", serverAddress, e.getMessage());
} else {
LOG.warn("Session 0x{} for server {}, unexpected error{}",
Long.toHexString(getSessionId()),
serverAddress,
RETRY_CONN_MSG,
e);
}
cleanup();
if (state.isAlive()) {
eventThread.queueEvent(new WatchedEvent(
Event.EventType.None,
Event.KeeperState.Disconnected,
null));
}
clientCnxnSocket.updateNow();
clientCnxnSocket.updateLastSendAndHeard();
}
}
}
cleanup();
clientCnxnSocket.close();
if (state.isAlive()) {
eventThread.queueEvent(new WatchedEvent(Event.EventType.None,
Event.KeeperState.Disconnected, null));
}
ZooTrace.logTraceMessage(LOG, ZooTrace.getTextTraceLevel(),
"SendThread exited loop for session: 0x"
+ Long.toHexString(getSessionId()));
}
第11-32行 建立与服务器的连接
第34-69 建立连接后判断是否要进行Sasl安全认证
第81-95 发送心跳
第111行 clientCnxnSocket.doTransport(to, pendingQueue, outgoingQueue, ClientCnxn.this)从待发送请求队列里面拿到数据发送到服务端
2、doTransport方法
void doTransport(int waitTimeOut, List<Packet> pendingQueue, LinkedList<Packet> outgoingQueue,
ClientCnxn cnxn)
throws IOException, InterruptedException {
selector.select(waitTimeOut);
Set<SelectionKey> selected;
synchronized (this) {
selected = selector.selectedKeys();
}
// Everything below and until we get back to the select is
// non blocking, so time is effectively a constant. That is
// Why we just have to do this once, here
updateNow();
for (SelectionKey k : selected) {
SocketChannel sc = ((SocketChannel) k.channel());
if ((k.readyOps() & SelectionKey.OP_CONNECT) != 0) {
if (sc.finishConnect()) {
updateLastSendAndHeard();
sendThread.primeConnection();
}
} else if ((k.readyOps() & (SelectionKey.OP_READ | SelectionKey.OP_WRITE)) != 0) {
doIO(pendingQueue, outgoingQueue, cnxn);
}
}
if (sendThread.getZkState().isConnected()) {
synchronized(outgoingQueue) {
if (findSendablePacket(outgoingQueue,
cnxn.sendThread.clientTunneledAuthenticationInProgress()) != null) {
enableWrite();
}
}
}
selected.clear();
}
第21行检测到可读可写的通道后，调用doIO方法发送消息 处理响应
3、doIO方法
void doIO(List<Packet> pendingQueue, LinkedList<Packet> outgoingQueue, ClientCnxn cnxn)
throws InterruptedException, IOException {
SocketChannel sock = (SocketChannel) sockKey.channel();
if (sock == null) {
throw new IOException("Socket is null!");
}
if (sockKey.isReadable()) {
int rc = sock.read(incomingBuffer);
if (rc < 0) {
throw new EndOfStreamException(
"Unable to read additional data from server sessionid 0x"
+ Long.toHexString(sessionId)
+ ", likely server has closed socket");
}
if (!incomingBuffer.hasRemaining()) {
incomingBuffer.flip();
if (incomingBuffer == lenBuffer) {
recvCount++;
readLength();
} else if (!initialized) {
readConnectResult();
enableRead();
if (findSendablePacket(outgoingQueue,
cnxn.sendThread.clientTunneledAuthenticationInProgress()) != null) {
// Since SASL authentication has completed (if client is configured to do so),
// outgoing packets waiting in the outgoingQueue can now be sent.
enableWrite();
}
lenBuffer.clear();
incomingBuffer = lenBuffer;
updateLastHeard();
initialized = true;
} else {
sendThread.readResponse(incomingBuffer);
lenBuffer.clear();
incomingBuffer = lenBuffer;
updateLastHeard();
}
}
}
if (sockKey.isWritable()) {
synchronized(outgoingQueue) {
Packet p = findSendablePacket(outgoingQueue,
cnxn.sendThread.clientTunneledAuthenticationInProgress());
if (p != null) {
updateLastSend();
// If we already started writing p, p.bb will already exist
if (p.bb == null) {
if ((p.requestHeader != null) &&
(p.requestHeader.getType() != OpCode.ping) &&
(p.requestHeader.getType() != OpCode.auth)) {
p.requestHeader.setXid(cnxn.getXid());
}
p.createBB();
}
sock.write(p.bb);
if (!p.bb.hasRemaining()) {
sentCount++;
outgoingQueue.removeFirstOccurrence(p);
if (p.requestHeader != null
&& p.requestHeader.getType() != OpCode.ping
&& p.requestHeader.getType() != OpCode.auth) {
synchronized (pendingQueue) {
pendingQueue.add(p);
}
}
}
}
if (outgoingQueue.isEmpty()) {
// No more packets to send: turn off write interest flag.
// Will be turned on later by a later call to enableWrite(),
// from within ZooKeeperSaslClient (if client is configured
// to attempt SASL authentication), or in either doIO() or
// in doTransport() if not.
disableWrite();
} else if (!initialized && p != null && !p.bb.hasRemaining()) {
// On initial connection, write the complete connect request
// packet, but then disable further writes until after
// receiving a successful connection response. If the
// session is expired, then the server sends the expiration
// response and immediately closes its end of the socket. If
// the client is simultaneously writing on its end, then the
// TCP stack may choose to abort with RST, in which case the
// client would never receive the session expired event. See
// http://docs.oracle.com/javase/6/docs/technotes/guides/net/articles/connection_release.html
disableWrite();
} else {
// Just in case
enableWrite();
}
}
}
}
第7-40行处理通道读事件
第30行具体处理服务端的响应事件 sendThread.readResponse(incomingBuffer);
4、readResponse方法
// SendThread
void readResponse(ByteBuffer incomingBuffer) throws IOException {
ByteBufferInputStream bbis = new ByteBufferInputStream(
incomingBuffer);
BinaryInputArchive bbia = BinaryInputArchive.getArchive(bbis);
ReplyHeader replyHdr = new ReplyHeader();
replyHdr.deserialize(bbia, "header");
if (replyHdr.getXid() == -2) {
// -2 is the xid for pings
if (LOG.isDebugEnabled()) {
LOG.debug("Got ping response for sessionid: 0x"
+ Long.toHexString(sessionId)
+ " after "
+ ((System.nanoTime() - lastPingSentNs) / 1000000)
+ "ms");
}
return;
}
// 非特殊请求xid返回的request传入的
if (replyHdr.getXid() == -4) {
// -4 is the xid for AuthPacket
if(replyHdr.getErr() == KeeperException.Code.AUTHFAILED.intValue()) {
state = States.AUTH_FAILED;
eventThread.queueEvent( new WatchedEvent(Watcher.Event.EventType.None,
Watcher.Event.KeeperState.AuthFailed, null) );
}
if (LOG.isDebugEnabled()) {
LOG.debug("Got auth sessionid:0x"
+ Long.toHexString(sessionId));
}
return;
}
if (replyHdr.getXid() == -1) {
// -1 means notification
if (LOG.isDebugEnabled()) {
LOG.debug("Got notification sessionid:0x"
+ Long.toHexString(sessionId));
}
WatcherEvent event = new WatcherEvent();
event.deserialize(bbia, "response");
// convert from a server path to a client path
if (chrootPath != null) {
String serverPath = event.getPath();
if(serverPath.compareTo(chrootPath)==0)
event.setPath("/");
else if (serverPath.length() > chrootPath.length())
event.setPath(serverPath.substring(chrootPath.length()));
else {
LOG.warn("Got server path " + event.getPath()
+ " which is too short for chroot path "
+ chrootPath);
}
}
WatchedEvent we = new WatchedEvent(event);
if (LOG.isDebugEnabled()) {
LOG.debug("Got " + we + " for sessionid 0x"
+ Long.toHexString(sessionId));
}
eventThread.queueEvent( we );
return;
}
// If SASL authentication is currently in progress, construct and
// send a response packet immediately, rather than queuing a
// response as with other packets.
if (clientTunneledAuthenticationInProgress()) {
GetSASLRequest request = new GetSASLRequest();
request.deserialize(bbia,"token");
zooKeeperSaslClient.respondToServer(request.getToken(),
ClientCnxn.this);
return;
}
Packet packet;
synchronized (pendingQueue) {
if (pendingQueue.size() == 0) {
throw new IOException("Nothing in the queue, but got "
+ replyHdr.getXid());
}
packet = pendingQueue.remove();
}
/*
* Since requests are processed in order, we better get a response
* to the first request!
*/
try {
if (packet.requestHeader.getXid() != replyHdr.getXid()) {
packet.replyHeader.setErr(
KeeperException.Code.CONNECTIONLOSS.intValue());
throw new IOException("Xid out of order. Got Xid "
+ replyHdr.getXid() + " with err " +
+ replyHdr.getErr() +
" expected Xid "
+ packet.requestHeader.getXid()
+ " for a packet with details: "
+ packet );
}
packet.replyHeader.setXid(replyHdr.getXid());
packet.replyHeader.setErr(replyHdr.getErr());
packet.replyHeader.setZxid(replyHdr.getZxid());
if (replyHdr.getZxid() > 0) {
lastZxid = replyHdr.getZxid();
}
if (packet.response != null && replyHdr.getErr() == 0) {
packet.response.deserialize(bbia, "response");
}
if (LOG.isDebugEnabled()) {
LOG.debug("Reading reply sessionid:0x"
+ Long.toHexString(sessionId) + ", packet:: " + packet);
}
} finally {
finishPacket(packet);
}
}
readResponse 针对不同的请求命令，处理是不一样的
- 响应消息是 notification
第34行replyHdr.getXid() == -1表明服务端返回的消息类型是通知，调用EventThread queueEvent方法将消息包装成WatcherSetEventPair添加到EventThread 的待处理事件队列里面 - 对应一些普通请求(比如Exists SetData GetData GetChildren )调用
finishPacket方法，将服务端响应的消息添加到EventThread 的待处理事件队列里面
EventThread
这个线程主要处理服务端响应的消息，包括普通请求响应消息，还有事件通知，处理逻辑在processEvent方法里面
private void processEvent(Object event) {
try {
if (event instanceof WatcherSetEventPair) {
// each watcher will process the event
WatcherSetEventPair pair = (WatcherSetEventPair) event;
for (Watcher watcher : pair.watchers) {
try {
watcher.process(pair.event);
} catch (Throwable t) {
LOG.error("Error while calling watcher ", t);
}
}
} else {
Packet p = (Packet) event;
int rc = 0;
String clientPath = p.clientPath;
if (p.replyHeader.getErr() != 0) {
rc = p.replyHeader.getErr();
}
if (p.cb == null) {
LOG.warn("Somehow a null cb got to EventThread!");
} else if (p.response instanceof ExistsResponse
|| p.response instanceof SetDataResponse
|| p.response instanceof SetACLResponse) {
StatCallback cb = (StatCallback) p.cb;
if (rc == 0) {
if (p.response instanceof ExistsResponse) {
cb.processResult(rc, clientPath, p.ctx,
((ExistsResponse) p.response)
.getStat());
} else if (p.response instanceof SetDataResponse) {
cb.processResult(rc, clientPath, p.ctx,
((SetDataResponse) p.response)
.getStat());
} else if (p.response instanceof SetACLResponse) {
cb.processResult(rc, clientPath, p.ctx,
((SetACLResponse) p.response)
.getStat());
}
} else {
cb.processResult(rc, clientPath, p.ctx, null);
}
} else if (p.response instanceof GetDataResponse) {
DataCallback cb = (DataCallback) p.cb;
GetDataResponse rsp = (GetDataResponse) p.response;
if (rc == 0) {
cb.processResult(rc, clientPath, p.ctx, rsp
.getData(), rsp.getStat());
} else {
cb.processResult(rc, clientPath, p.ctx, null,
null);
}
} else if (p.response instanceof GetACLResponse) {
ACLCallback cb = (ACLCallback) p.cb;
GetACLResponse rsp = (GetACLResponse) p.response;
if (rc == 0) {
cb.processResult(rc, clientPath, p.ctx, rsp
.getAcl(), rsp.getStat());
} else {
cb.processResult(rc, clientPath, p.ctx, null,
null);
}
} else if (p.response instanceof GetChildrenResponse) {
ChildrenCallback cb = (ChildrenCallback) p.cb;
GetChildrenResponse rsp = (GetChildrenResponse) p.response;
if (rc == 0) {
cb.processResult(rc, clientPath, p.ctx, rsp
.getChildren());
} else {
cb.processResult(rc, clientPath, p.ctx, null);
}
} else if (p.response instanceof GetChildren2Response) {
Children2Callback cb = (Children2Callback) p.cb;
GetChildren2Response rsp = (GetChildren2Response) p.response;
if (rc == 0) {
cb.processResult(rc, clientPath, p.ctx, rsp
.getChildren(), rsp.getStat());
} else {
cb.processResult(rc, clientPath, p.ctx, null, null);
}
} else if (p.response instanceof CreateResponse) {
StringCallback cb = (StringCallback) p.cb;
CreateResponse rsp = (CreateResponse) p.response;
if (rc == 0) {
cb.processResult(rc, clientPath, p.ctx,
(chrootPath == null
? rsp.getPath()
: rsp.getPath()
.substring(chrootPath.length())));
} else {
cb.processResult(rc, clientPath, p.ctx, null);
}
} else if (p.response instanceof MultiResponse) {
MultiCallback cb = (MultiCallback) p.cb;
MultiResponse rsp = (MultiResponse) p.response;
if (rc == 0) {
List<OpResult> results = rsp.getResultList();
int newRc = rc;
for (OpResult result : results) {
if (result instanceof ErrorResult
&& KeeperException.Code.OK.intValue()
!= (newRc = ((ErrorResult) result).getErr())) {
break;
}
}
cb.processResult(newRc, clientPath, p.ctx, results);
} else {
cb.processResult(rc, clientPath, p.ctx, null);
}
} else if (p.cb instanceof VoidCallback) {
VoidCallback cb = (VoidCallback) p.cb;
cb.processResult(rc, clientPath, p.ctx);
}
}
} catch (Throwable t) {
LOG.error("Caught unexpected throwable", t);
}
}
}
第5-12行 如果处理的响应是通知，调用Zookeeper的ZKWatchManager对应的Watcher处理，这个在EventThread queueEvent 方法构造WatcherSetEventPair时做了筛选
后面就是针对一些普通命令响应消息做的处理,不同命令响应的Response不同
四、服务端怎样响应
前面说到EventThread 处理服务端的响应消息，那么服务端接收到命令后是怎样处理并返回消息的呢，
我们知道服务端在接收到客户端请求后经过一系列RequestProcessor处理完成后再向客户端响应消息，无论哪一种类型的服务器节点，RequestProcessor链表最后一个处理器都是FinalRequestProcessor
case OpCode.exists: {
lastOp = "EXIS";
// TODO we need to figure out the security requirement for this!
ExistsRequest existsRequest = new ExistsRequest();
ByteBufferInputStream.byteBuffer2Record(request.request,
existsRequest);
String path = existsRequest.getPath();
if (path.indexOf('\0') != -1) {
throw new KeeperException.BadArgumentsException();
}
Stat stat = zks.getZKDatabase().statNode(path, existsRequest
.getWatch() ? cnxn : null);
rsp = new ExistsResponse(stat);
break;
}
case OpCode.getData: {
lastOp = "GETD";
GetDataRequest getDataRequest = new GetDataRequest();
ByteBufferInputStream.byteBuffer2Record(request.request,
getDataRequest);
DataNode n = zks.getZKDatabase().getNode(getDataRequest.getPath());
if (n == null) {
throw new KeeperException.NoNodeException();
}
PrepRequestProcessor.checkACL(zks, zks.getZKDatabase().aclForNode(n),
ZooDefs.Perms.READ,
request.authInfo);
Stat stat = new Stat();
byte b[] = zks.getZKDatabase().getData(getDataRequest.getPath(), stat,
getDataRequest.getWatch() ? cnxn : null);
rsp = new GetDataResponse(b, stat);
break;
}
都是从ZKDatabase拿到对应数据并返回
前面说到replyHdr.getXid() == -1对于返回消息xid是-1表明这是一个事件通知，那么服务端什么时候发送通知事件呢
事件类型在Watcher接口EventType枚举类中定义，我们搜索下看看再哪里有调用就知道什么场景下可以发送通知了
在DataTree（ZK底层数据结构）定义了两个Watch管理器
private final WatchManager dataWatches = new WatchManager();
private final WatchManager childWatches = new WatchManager();
节点创建 删除 设值 都会触发Watch 调用到WatchManager 的 triggerWatch方法
public Set<Watcher> triggerWatch(String path, EventType type, Set<Watcher> supress) {
WatchedEvent e = new WatchedEvent(type,
KeeperState.SyncConnected, path);
HashSet<Watcher> watchers;
synchronized (this) {
//直接删除了 一次性
watchers = watchTable.remove(path);
if (watchers == null || watchers.isEmpty()) {
if (LOG.isTraceEnabled()) {
ZooTrace.logTraceMessage(LOG,
ZooTrace.EVENT_DELIVERY_TRACE_MASK,
"No watchers for " + path);
}
return null;
}
for (Watcher w : watchers) {
HashSet<String> paths = watch2Paths.get(w);
if (paths != null) {
paths.remove(path);
}
}
}
for (Watcher w : watchers) {
if (supress != null && supress.contains(w)) {
continue;
}
w.process(e);
}
return watchers;
}
这里如果对应Key有设值监听的话就会调用Watcher 接口 process方法具体，具体实现在NettyServerCnxn中
public void process(WatchedEvent event) {
ReplyHeader h = new ReplyHeader(-1, -1L, 0);
if (LOG.isTraceEnabled()) {
ZooTrace.logTraceMessage(LOG, ZooTrace.EVENT_DELIVERY_TRACE_MASK,
"Deliver event " + event + " to 0x"
+ Long.toHexString(this.sessionId)
+ " through " + this);
}
// Convert WatchedEvent to a type that can be sent over the wire
WatcherEvent e = event.getWrapper();
try {
sendResponse(h, e, "notification");
} catch (IOException e1) {
if (LOG.isDebugEnabled()) {
LOG.debug("Problem sending to " + getRemoteSocketAddress(), e1);
}
close();
}
}
向客户端写出消息，构造的ReplyHeader 对象xid值是-1，所以客户端识别到这个响应就会处理通知
那么为什么最后通过NettyServerCnxn来向客户端写出通知呢，答案还在FinalRequestProcessor这个类里面
byte b[] = zks.getZKDatabase().getData(getDataRequest.getPath(), stat,getDataRequest.getWatch() ? cnxn : null);
这里是一个获取数据的请求，客户端希望在服务端数据发生改变后可以及时拿到通知，所以在请求里面注册了一个通知(这里只有一个标识是否注册监听)，如果有出处监听的话就把当前NettyServerCnxn添加到DataTree的监听管理器里面
1002
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
