Native-Activity

NativeActivity的介绍在官网：

http://developer.android.com/reference/android/app/NativeActivity.html

使用NativeActivity无需继承这个类，只需要在manifest中进行声明，并使用NDK中的API即可

示例参见：android-ndk-r10e\samples\native-activity这一工程

1.首先要初始化android_app*类型的结构体state

2.然后开启一个循环做需要做的事情

3.循环中做的事情是，通过ALooper_pollAll等待事件，如果等到了事件，因为前面调用ALooper_pollAll的时候以source和events的引用作为形参进行了初始化。所以这里再调用已初始化的source的process函数对事件进行处理。

ALooper_pollAll的作用和ALooper_Once相似，ALooper_Once用于等待事件可用，伴随毫秒为单位的可选超时参数，在事件发生的文件描述符上调用回调，如果超时参数为0，则不阻塞立即返回，如果超时参数为负，则无限期等待直到事件出现。只不过ALooper_pollAll则会触发所有回调直到所有数据被消费掉或者文件描述符不再拥有回调回到可用状态，函数原型：

int ALooper_pollAll	(	int 	timeoutMillis,
int * 	outFd,
int * 	outEvents,
void ** 	outData 
)	

详细参见：http://developer.android.com/ndk/reference/group___looper.html#gaa7cd0636edc4ed227aadc585360ebefa

4.android_poll_source定义在：android_native_app_glue.h中。分析原型

// loop waiting for stuff to do.
    struct android_poll_source {
           // The identifier of this source.  May be LOOPER_ID_MAIN or
           // LOOPER_ID_INPUT.
           int32_t id;

           // The android_app this ident is associated with.
           struct android_app* app;

           // Function to call to perform the standard processing of data from
           // this source.
          void (*process)(struct android_app* app, struct android_poll_source* source);
      };

可知process其实是个函数指针

/*
 * Copyright (C) 2010 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */

//BEGIN_INCLUDE(all)
#include <jni.h>
#include <errno.h>

#include <EGL/egl.h>
#include <GLES/gl.h>

#include <android/sensor.h>
#include <android/log.h>
#include <android_native_app_glue.h>

#define LOGI(...) ((void)__android_log_print(ANDROID_LOG_INFO, "native-activity", __VA_ARGS__))
#define LOGW(...) ((void)__android_log_print(ANDROID_LOG_WARN, "native-activity", __VA_ARGS__))

/**
 * Our saved state data.
 */
struct saved_state {
    float angle;
    int32_t x;
    int32_t y;
};

/**
 * Shared state for our app.
 */
struct engine {
    struct android_app* app;

    ASensorManager* sensorManager;
    const ASensor* accelerometerSensor;
    ASensorEventQueue* sensorEventQueue;

    int animating;
    EGLDisplay display;
    EGLSurface surface;
    EGLContext context;
    int32_t width;
    int32_t height;
    struct saved_state state;
};

/**
 * Initialize an EGL context for the current display.
 */
static int engine_init_display(struct engine* engine) {
    // initialize OpenGL ES and EGL

    /*
     * Here specify the attributes of the desired configuration.
     * Below, we select an EGLConfig with at least 8 bits per color
     * component compatible with on-screen windows
     */
    const EGLint attribs[] = {
            EGL_SURFACE_TYPE, EGL_WINDOW_BIT,
            EGL_BLUE_SIZE, 8,
            EGL_GREEN_SIZE, 8,
            EGL_RED_SIZE, 8,
            EGL_NONE
    };
    EGLint w, h, dummy, format;
    EGLint numConfigs;
    EGLConfig config;
    EGLSurface surface;
    EGLContext context;

    EGLDisplay display = eglGetDisplay(EGL_DEFAULT_DISPLAY);

    eglInitialize(display, 0, 0);

    /* Here, the application chooses the configuration it desires. In this
     * sample, we have a very simplified selection process, where we pick
     * the first EGLConfig that matches our criteria */
    eglChooseConfig(display, attribs, &config, 1, &numConfigs);

    /* EGL_NATIVE_VISUAL_ID is an attribute of the EGLConfig that is
     * guaranteed to be accepted by ANativeWindow_setBuffersGeometry().
     * As soon as we picked a EGLConfig, we can safely reconfigure the
     * ANativeWindow buffers to match, using EGL_NATIVE_VISUAL_ID. */
    eglGetConfigAttrib(display, config, EGL_NATIVE_VISUAL_ID, &format);

    ANativeWindow_setBuffersGeometry(engine->app->window, 0, 0, format);

    surface = eglCreateWindowSurface(display, config, engine->app->window, NULL);
    context = eglCreateContext(display, config, NULL, NULL);

    if (eglMakeCurrent(display, surface, surface, context) == EGL_FALSE) {
        LOGW("Unable to eglMakeCurrent");
        return -1;
    }

    eglQuerySurface(display, surface, EGL_WIDTH, &w);
    eglQuerySurface(display, surface, EGL_HEIGHT, &h);

    engine->display = display;
    engine->context = context;
    engine->surface = surface;
    engine->width = w;
    engine->height = h;
    engine->state.angle = 0;

    // Initialize GL state.
    glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_FASTEST);
    glEnable(GL_CULL_FACE);
    glShadeModel(GL_SMOOTH);
    glDisable(GL_DEPTH_TEST);

    return 0;
}

/**
 * Just the current frame in the display.
 */
static void engine_draw_frame(struct engine* engine) {
    if (engine->display == NULL) {
        // No display.
        return;
    }

    // Just fill the screen with a color.
    glClearColor(((float)engine->state.x)/engine->width, engine->state.angle,
            ((float)engine->state.y)/engine->height, 1);
    glClear(GL_COLOR_BUFFER_BIT);

    eglSwapBuffers(engine->display, engine->surface);
}

/**
 * Tear down the EGL context currently associated with the display.
 */
static void engine_term_display(struct engine* engine) {
    if (engine->display != EGL_NO_DISPLAY) {
        eglMakeCurrent(engine->display, EGL_NO_SURFACE, EGL_NO_SURFACE, EGL_NO_CONTEXT);
        if (engine->context != EGL_NO_CONTEXT) {
            eglDestroyContext(engine->display, engine->context);
        }
        if (engine->surface != EGL_NO_SURFACE) {
            eglDestroySurface(engine->display, engine->surface);
        }
        eglTerminate(engine->display);
    }
    engine->animating = 0;
    engine->display = EGL_NO_DISPLAY;
    engine->context = EGL_NO_CONTEXT;
    engine->surface = EGL_NO_SURFACE;
}

/**
 * Process the next input event.
 */
static int32_t engine_handle_input(struct android_app* app, AInputEvent* event) {
    struct engine* engine = (struct engine*)app->userData;
    if (AInputEvent_getType(event) == AINPUT_EVENT_TYPE_MOTION) {
        engine->animating = 1;
        engine->state.x = AMotionEvent_getX(event, 0);
        engine->state.y = AMotionEvent_getY(event, 0);
        return 1;
    }
    return 0;
}

/**
 * Process the next main command.
 */
static void engine_handle_cmd(struct android_app* app, int32_t cmd) {
    struct engine* engine = (struct engine*)app->userData;
    switch (cmd) {
        case APP_CMD_SAVE_STATE:
            // The system has asked us to save our current state.  Do so.
            engine->app->savedState = malloc(sizeof(struct saved_state));
            *((struct saved_state*)engine->app->savedState) = engine->state;
            engine->app->savedStateSize = sizeof(struct saved_state);
            break;
        case APP_CMD_INIT_WINDOW:
            // The window is being shown, get it ready.
            if (engine->app->window != NULL) {
                engine_init_display(engine);
                engine_draw_frame(engine);
            }
            break;
        case APP_CMD_TERM_WINDOW:
            // The window is being hidden or closed, clean it up.
            engine_term_display(engine);
            break;
        case APP_CMD_GAINED_FOCUS:
            // When our app gains focus, we start monitoring the accelerometer.
            if (engine->accelerometerSensor != NULL) {
                ASensorEventQueue_enableSensor(engine->sensorEventQueue,
                        engine->accelerometerSensor);
                // We'd like to get 60 events per second (in us).
                ASensorEventQueue_setEventRate(engine->sensorEventQueue,
                        engine->accelerometerSensor, (1000L/60)*1000);
            }
            break;
        case APP_CMD_LOST_FOCUS:
            // When our app loses focus, we stop monitoring the accelerometer.
            // This is to avoid consuming battery while not being used.
            if (engine->accelerometerSensor != NULL) {
                ASensorEventQueue_disableSensor(engine->sensorEventQueue,
                        engine->accelerometerSensor);
            }
            // Also stop animating.
            engine->animating = 0;
            engine_draw_frame(engine);
            break;
    }
}

/**
 * This is the main entry point of a native application that is using
 * android_native_app_glue.  It runs in its own thread, with its own
 * event loop for receiving input events and doing other things.
 */
void android_main(struct android_app* state) {
    struct engine engine;

    // Make sure glue isn't stripped.
    app_dummy();

    memset(&engine, 0, sizeof(engine));
    state->userData = &engine;
    state->onAppCmd = engine_handle_cmd;
    state->onInputEvent = engine_handle_input;
    engine.app = state;

    // Prepare to monitor accelerometer
    engine.sensorManager = ASensorManager_getInstance();
    engine.accelerometerSensor = ASensorManager_getDefaultSensor(engine.sensorManager,
            ASENSOR_TYPE_ACCELEROMETER);
    engine.sensorEventQueue = ASensorManager_createEventQueue(engine.sensorManager,
            state->looper, LOOPER_ID_USER, NULL, NULL);

    if (state->savedState != NULL) {
        // We are starting with a previous saved state; restore from it.
        engine.state = *(struct saved_state*)state->savedState;
    }

    // loop waiting for stuff to do.

    while (1) {
        // Read all pending events.
        int ident;
        int events;
        struct android_poll_source* source;

        // If not animating, we will block forever waiting for events.
        // If animating, we loop until all events are read, then continue
        // to draw the next frame of animation.
        while ((ident=ALooper_pollAll(engine.animating ? 0 : -1, NULL, &events,
                (void**)&source)) >= 0) {

            // Process this event.
            if (source != NULL) {
                source->process(state, source);
            }

            // If a sensor has data, process it now.
            if (ident == LOOPER_ID_USER) {
                if (engine.accelerometerSensor != NULL) {
                    ASensorEvent event;
                    while (ASensorEventQueue_getEvents(engine.sensorEventQueue,
                            &event, 1) > 0) {
                        LOGI("accelerometer: x=%f y=%f z=%f",
                                event.acceleration.x, event.acceleration.y,
                                event.acceleration.z);
                    }
                }
            }

            // Check if we are exiting.
            if (state->destroyRequested != 0) {
                engine_term_display(&engine);
                return;
            }
        }

        if (engine.animating) {
            // Done with events; draw next animation frame.
            engine.state.angle += .01f;
            if (engine.state.angle > 1) {
                engine.state.angle = 0;
            }

            // Drawing is throttled to the screen update rate, so there
            // is no need to do timing here.
            engine_draw_frame(&engine);
        }
    }
}
//END_INCLUDE(all)