Huawei MA5100 Multi-service Access Module.
Copyright(C) 1998-2002 by Huawei Technologies Co., Ltd.
> User name (<20 chars):(登陆,输入用户名和密码)
> Password (<20 chars):
MA5100>enable
MA5100#configure
Command word <terminal>:terminal
MA5100(config)#atmlan ip-address(配置网络地址)
{ethernet,atm}:atm
<IP address>:192.168.253.2
<mask>:255.255.255.0
Changing system IP may effect existent connection,Are you sure?(y/n) [n]:y
Set successfully.
MA5100(config)#atmlan ip-route(配置路由网关)
<subnet address>:0.0.0.0
<mask>:0.0.0.0
<gateway>:192.168.253.1
Add successfully.
MA5100(config)#atmlan ip-access(访问列表)
<start IP address>:10.10.10.0
<end IP address>:10.10.10.255
<mask>:255.255.255.0
Add acceptable IP address successfully.
MA5100(config)#interface lan 0/13(配置LAN板模式和端口0的模式)
MA5100(config-LAN-0/13)#operation-mode
{general,ipdslam}:ipdslam
Please delete all LAN access PVC(except LAN-NMS PVC)of current board before
switching operation mode.
Are you sure to switch operation mode and to reset current board?(y/n) [n]:y
Do you want to reserve region PVC and LAN-NMS PVC of current board?(y/n) [y]:y
Reset command was sent to service board successfully.
Switch operation mode successfully.
MA5100(config-LAN-0/13)#port
Command word <line-selfadaptive,mode>:mode
{<portId>}{0-7}:0
{general,ipdslam}:ipdslam
{negotiate,non-negotiate}:non-negotiate
{half-duplex,full-duplex}:full-duplex
<speed>{10m,100m}:100m
<pause-frame>{pause-frame,non-pause-frame}:non-pause-frame
MA5100(config-LAN-0/13)#vlan(增加业务VLAN)
Command word <add,delete,mask>:add
<vlanId>{1-4095}:331(VLAN数值是网络规划中指定的,由BAS提供)
{general,ipdslam-region}:ipdslam-region
<vpi>{0-127}:0
<vci>{32-127}:35
Add VLAN successfully.
MA5100(config-LAN-0/13)#exit
MA5100(config)#pvc//(增加网管PVC)
{adsl,atm,aiu,ces-sdt,ces-udt,c