2012-Linux->18(1_20 error)->2 <do u know reasons?>

��Flash: 512 KiB

NAND:  NAND_ECC_NONE selected byboard driver. This is not recommended !!

256 MiB

In:    serial

Out:   serial

Err:   serial

Net:   dm9000

Hit any key to stop autoboot:  0

dm9000 i/o: 0x20000300, id: 0x90000a46

DM9000: running in 16 bit mode

MAC: 08:00:3e:26:0a:5b

operating at unknown: 0 mode

Using dm9000 device

TFTP from server 192.168.10.124; our IP address is 192.168.10.126

Filename 'zImage'.

Load address: 0x33000000

Loading: T T #################################################################

        #################################################################

        ################################

done

Bytes transferred = 2371720 (243088 hex)

## Starting application at 0x33000000 ...

Uncompressing Linux... done, booting the kernel.

Linux version 2.6.35 (root@ubuntu) (gcc version 4.3.2(crosstool-NG-1.8.1-farsight) ) #25 Fri Jan 20 22:14:01 CST 2012

CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177

CPU: VIVT data cache, VIVT instruction cache

Machine: SMDK2410

Warning: bad configuration page, trying to continue

Memory policy: ECC disabled, Data cache writeback

CPU S3C2440A (id 0x32440001)

S3C24XX Clocks, Copyright 2004 Simtec Electronics

S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz

CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064

Kernel command line: root=/dev/hda1 ro init=/bin/bash console=ttySAC0

PID hash table entries: 64 (order: -4, 256 bytes)

Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)

Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)

Memory: 16MB = 16MB total

Memory: 11340k/11340k available, 5044k reserved, 0K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    DMA     : 0xffc00000 - 0xffe00000   (   2MB)

    vmalloc : 0xc1800000 -0xe0000000   ( 488 MB)

    lowmem  : 0xc0000000 - 0xc1000000   (  16MB)

    modules : 0xbf000000 -0xc0000000   (  16 MB)

      .init : 0xc0108000 -0xc0133000   ( 172 kB)

      .text : 0xc0133000 -0xc0547000   (4176 kB)

      .data : 0xc0566000 -0xc059b820   ( 215 kB)

Hierarchical RCU implementation.

        RCU-based detection ofstalled CPUs is disabled.

        Verbose stalled-CPUsdetection is disabled.

NR_IRQS:99

irq: clearing subpending status 00000002

Console: colour dummy device 80x30

console [ttySAC0] enabled

Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

S3C Power Management, Copyright 2004 Simtec Electronics

S3C2440: Initialising architecture

S3C2440: IRQ Support

S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics

DMA channel 0 at c1808000, irq 33

DMA channel 1 at c1808040, irq 34

DMA channel 2 at c1808080, irq 35

DMA channel 3 at c18080c0, irq 36

S3C244X: Clock Support, DVS off

s3c-adc s3c24xx-adc: attached adc driver

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Advanced Linux Sound Architecture Driver Version 1.0.23.

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 512 (order: 0, 4096 bytes)

TCP bind hash table entries: 512 (order: -1, 2048 bytes)

TCP: Hash tables configured (established 512 bind 512)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

NetWinder Floating Point Emulator V0.97 (extended precision)

JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

ROMFS MTD (C) 2007 Red Hat, Inc.

yaffs Dec 16 2011 11:24:11 Installing.

msgmni has been set to 22

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

Console: switching to colour frame buffer device 30x40

fb0: s3c2410fb frame buffer device

lp: driver loaded but no devices found

ppdev: user-space parallel port driver

Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is aS3C2440

s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is aS3C2440

s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is aS3C2440

brd: module loaded

loop: module loaded

Uniform Multi-Platform E-IDE driver

ide-gd driver 1.18

ide-cd driver 5.00

SCSI Media Changer driver v0.25

S3C24XX NAND Driver, (c) 2004 Simtec Electronics

s3c24xx-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns

s3c24xx-nand s3c2440-nand: NAND soft ECC

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB3,3V 8-bit)

Scanning device for bad blocks

Bad eraseblock 0 at 0x000000000000

Creating 5 MTD partitions on "NAND 256MiB 3,3V 8-bit":

0x000000000000-0x000000040000 : "supervivi"(但我nand放的是uboot丫)

mtd: partition "supervivi" doesn't end on an erase block --force read-only

0x000000040000-0x000000060000 : "param"

mtd: partition "param" doesn't start on an erase blockboundary -- force read-only

0x000000060000-0x000000560000 : "Kernel"

mtd: partition "Kernel" doesn't start on an erase blockboundary -- force read-only

0x000000560000-0x000040560000 : "root"

mtd: partition "root" extends beyond the end of device"NAND 256MiB 3,3V 8-bit" -- size truncated to 0xfaa0000

mtd: partition "root" doesn't start on an erase blockboundary -- force read-only

0x000000000000-0x000040000000 : "nand"

mtd: partition "nand" extends beyond the end of device"NAND 256MiB 3,3V 8-bit" -- size truncated to 0x10000000

dm9000 Ethernet Driver, V1.31

Cirrus Logic CS8900A driver for Linux (Modified for SMDK2410)

eth0: incorrect signature 0x0000

usbmon: debugfs is not available

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number1

s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

usbcore: registered new interface driver libusual

usbcore: registered new interface driver usbserial

USB Serial support registered for generic

usbcore: registered new interface driver usbserial_generic

usbserial: USB Serial Driver core

USB Serial support registered for FTDI USB Serial Device

usbcore: registered new interface driver ftdi_sio

ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

USB Serial support registered for pl2303

usbcore: registered new interface driver pl2303

pl2303: Prolific PL2303 USB to serial adaptor driver

mice: PS/2 mouse device common for all mice

S3C24XX RTC, (c) 2004,2006 Simtec Electronics

IR NEC protocol handler initialized

IR RC5(x) protocol handler initialized

IR RC6 protocol handler initialized

IR JVC protocol handler initialized

IR Sony protocol handler initialized

Linux video capture interface: v2.00

zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chipv1:1.10

usbcore: registered new interface driver zc0301

s3c-sdi s3c2440-sdi: powered down.

s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ

No device for DAI UDA134X

No device for DAI s3c24xx-i2s

S3C24XX_UDA134X SoC Audio driver

UDA134X SoC Audio Codec

asoc: UDA134X <-> s3c24xx-i2s mapping ok

ALSA device list:

  #0: S3C24XX_UDA134X (UDA134X)

TCP cubic registered

NET: Registered protocol family 17

drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

Root-NFS: No NFS server available, giving up.

VFS: Unable to mount root fs via NFS, trying floppy.

VFS: Cannot open root device "hda1" or unknown-block(2,0)

Please append a correct "root=" boot option; here are theavailable partitions:

1f00             256 mtdblock0(driver?)

1f01             128 mtdblock1(driver?)

1f02            5120 mtdblock2(driver?)

1f03          256640 mtdblock3 (driver?)

1f04          262144 mtdblock4(driver?)

Kernel panic - not syncing: VFS: Unable to mount root fs onunknown-block(2,0)

[<c013940c>] (unwind_backtrace+0x0/0xec) from [<c0435b74>](panic+0x4c/0xdc)

[<c0435b74>] (panic+0x4c/0xdc) from [<c01090f8>](mount_block_root+0x1d4/0x21c)

[<c01090f8>] (mount_block_root+0x1d4/0x21c) from[<c01093a8>] (prepare_namespace+0x164/0x1c8)

[<c01093a8>] (prepare_namespace+0x164/0x1c8) from[<c0108618>] (kernel_init+0x10c/0x150)

[<c0108618>] (kernel_init+0x10c/0x150) from [<c0134e9c>](kernel_thread_exit+0x0/0x8)

Killed