C++ MFC对话框滚动条的使用

最新推荐文章于 2022-10-20 14:31:43 发布

dxm809

最新推荐文章于 2022-10-20 14:31:43 发布

阅读量1.1k

点赞数

分类专栏： C++

本文链接：https://blog.csdn.net/dxm809/article/details/117228073

版权

C++ 专栏收录该内容

334 篇文章 4 订阅

订阅专栏

　　(1)设置对话框的vertical scrollbar属性为true;

　　(2)初始化滚动条，如下：　　

	SCROLLINFO scrollinfo;
	GetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
	scrollinfo.nPage = 10;    //设置滑块大小
	scrollinfo.nMax = 75;     //设置滚动条的最大位置0--75
	SetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);

	CRect rc;
	GetClientRect(rc);
	rc.bottom = rc.top + 300;
	rc.right = rc.left + 300;
	MoveWindow(rc);

（3）滚动消息处理

void CScrollTestDlg::OnVScroll(UINT nSBCode, UINT nPos, CScrollBar* pScrollBar)
{
	// TODO: 在此添加消息处理程序代码和/或调用默认值
	SCROLLINFO scrollinfo;
	GetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
	int unit = 3;
	switch (nSBCode)
	{
	case SB_LINEUP:          //Scroll one line up
		scrollinfo.nPos -= 1;
		if (scrollinfo.nPos < scrollinfo.nMin)
		{
			scrollinfo.nPos = scrollinfo.nMin;
			break;
		}
		SetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
		ScrollWindow(0, unit);
		break;
	case SB_LINEDOWN:           //Scroll one line down
		scrollinfo.nPos += 1;
		if (scrollinfo.nPos + scrollinfo.nPage > scrollinfo.nMax)  //此处一定要注意加上滑块的长度，再作判断
		{
			scrollinfo.nPos = scrollinfo.nMax;
			break;
		}
		SetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
		ScrollWindow(0, -unit);
		break;
	case SB_PAGEUP:            //Scroll one page up.
		scrollinfo.nPos -= 5;
		if (scrollinfo.nPos <= scrollinfo.nMin)
		{
			scrollinfo.nPos = scrollinfo.nMin;
			break;
		}
		SetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
		ScrollWindow(0, unit * 5);
		break;
	case SB_PAGEDOWN:        //Scroll one page down        
		scrollinfo.nPos += 5;
		if (scrollinfo.nPos + scrollinfo.nPage >= scrollinfo.nMax)  //此处一定要注意加上滑块的长度，再作判断
		{
			scrollinfo.nPos = scrollinfo.nMax;
			break;
		}
		SetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
		ScrollWindow(0, -unit * 5);
		break;
	case SB_ENDSCROLL:      //End scroll     
		break;
	case SB_THUMBPOSITION:  //Scroll to the absolute position. The current position is provided in nPos
		break;
	case SB_THUMBTRACK:                  //Drag scroll box to specified position. The current position is provided in nPos
		ScrollWindow(0, (scrollinfo.nPos - nPos) * unit);
		scrollinfo.nPos = nPos;
		SetScrollInfo(SB_VERT, &scrollinfo, SIF_ALL);
		break;
	}

	CDialogEx::OnVScroll(nSBCode, nPos, pScrollBar);
}