一、属性集
CRITICAL :pseudo critical proerties(mole fraction averaged) /拟临界性质(平均摩尔分数)
包含的物理属性
- TCMX(混合物临界温度)
- PCMX(混合物临界压力)
- VCMX(混合物临界体积)
THERMAL:热力学
包含的物理属性
- Enthaphy(晗值)
- heat capacity(热容)
- thermal conductivity(热导)
二、例子
假如,我们需要知道常温常压下空气的热容
新建项目,选择‘公制单位空分’模板
初始化后的项目如下图
选择Property Sets 文件夹
其实,属性集THERMAL中已经包含了热容这一属性,假装我们不知道这一点,下面我就来新建一个只有热容属性的属性集
在Analyis文件夹中创建你要物性分析的混合物(我这里用空气)
方法一(推荐)
添加混合物各组分的流量值
假如,空气总量4933.04kmol/hr,根据氮、氧、氩的比例(氮气78.118%,氧气20.95%,氩气0.932%),
算出
N2流量值 = 4933.04*0.7811795566= 3853.59 kmol/hr
O2流量值 = 4933.04*0.2094996189 = 1033.47 kmol/hr
Ar流量值 = 4933.04*0.009320824 = 45.98 kmol/hr
方法二
Generic: Tables and plots of properties of either multi-phase mixtures (for example, vapor and liquid) resulting from flash calculations, or singlephase mixtures without flash calculations
PTenvelope :Tables of temperature, pressure, and other properties
Residue: Residue curve maps
Ternary: Ternary maps showing phase envelope, tie lines, and azeotropes of ternary systems
添加混合物各组分的流量值
假如,空气总量4933.04kmol/hr,根据氮、氧、氩的比例(氮气78.118%,氧气20.95%,氩气0.932%),
算出
N2流量值 = 4933.04*0.7811795566= 3853.59 kmol/hr
O2流量值 = 4933.04*0.2094996189 = 1033.47 kmol/hr
Ar流量值 = 4933.04*0.009320824 = 45.98 kmol/hr