烧写YAFFS2文件系统

Oftentimes it is useful to write the file system for you device into apermanent storage media such as NAND flash. Below you will find stepson how to write a YAFFS/YAFFS2 file system into NAND Flash on the DVEVMboards.

Prerequisites

• A file system image saved as a tarball file
• A terminal application for communicating with the DVEVM. i.e. minicom or hyperterminal
• A copy of the U-Boot bootloader running on the target
  • If you do not have U-Boot running on the target please see the RBL, UBL and host program article for how to get the U-Boot bootloader installed on your board first
• A kernel with YAFFS/YAFFS2 and Flash support enabled
  • For details on how to enable kernel YAFFS/YAFFS2 support see the YAFFS2 kernel configuration page
  • For details on how to enable kernel flash support refer to the Flash configuration in the Kernel page
  • For devices with 512b block NAND the HW ECC support must bedisabled