Autocom CDP Pro for cars Activation, firmware update
TURN OFF your internet connection and run program.
Then write the S/N and Hardware Key and click on "Activate via USB". The S/W's they will right some things on it!
So, put in your USB slot your USB Device and you will have the FileActivation.xml file.
For your Autocom Cars CDP Installation/Activation you will use those Details:
Serial Number = 30250
HardwareKey = MNZTTOOCNHVE
MaxModule = ZGTZADMTHOBT
DieselMax = BOBLLWPAVNBG
Autocom CDP pro for cars China clone doesn’t support firmware upgrade
I paste one dialogue from a forum, seam that the replier try to tell the asker how to update firmware after the answer’s autocom cdp pro is dropped down.
Q: How about firmware upgrade? I haven't tested this yet...Does it works good?
A: U must connect VCI and then upgrade
Q: My father dropped my autocom on the floor, but the impact wasn’t hard and it was from 40cm height, now when Itry to connect it, it says FIRMWARE ERROR. Do I need to update it? Or what can I do and it says NO VCI FOUND :/ I don’t know if it’s working now with the new software because I had release 1 before
A: Just update Firmware
Q: DO I need an internet connection to do that? And one more thing how do I update? Do I connect it via USB or?
A: No U don`t needed,just connect the autocom to computer via usb and press update
Q：Doesn’t work,ford scan tool! it says no power supply is connected, i can see on the autocom device that the LINK is on but not power, it gives me 3 options or faqs
1: no power is connected
2: wrong com port
3: the USB is wrong connected
A: seems to be broken, need to repair.
Conclusion, in fact autocom CDP pro china clone doesn’t support firmware update.
2355
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
