public abstract class CharBuffer extends Buffer implements
Comparable<CharBuffer>, Appendable, CharSequence, Readable {
final char[] hb; //指向缓冲区的数据存储的引用
final int offset;
boolean isReadOnly;
CharBuffer(int mark, int pos, int lim, int cap,
char[] hb, int offset) {
super(mark, pos, lim, cap);
this.hb = hb;
this.offset = offset;
}
CharBuffer(int mark, int pos, int lim, int cap) {
this(mark, pos, lim, cap, null, 0);
}
//静态工厂方法,创建HeapCharBuffer对象
/*
* HeapCharBuffer(int cap, int lim) {
* super(-1, 0, lim, cap, new char[cap], 0);
* }
*/
//从HeapCharBuffer(capacity, capacity)的构造函数可以看出
//这个方法将返回一个CharBuffer实例
//mark=-1,pos=0,lim=cap;cap=cap,hb=new char[cap],offset=0
public static CharBuffer allocate(int capacity) {
if (capacity < 0)
throw new IllegalArgumentException();
return new HeapCharBuffer(capacity, capacity);
}
//HeapCharBuffer(char[] buf, int off, int len) {
// super(-1, off, off + len, buf.length, buf, 0);
// }
//这个方法将返回一个CharBuffer实例
//mark=-1,....
public static CharBuffer wrap(char[] array, int offset, int length) {
try {
return new HeapCharBuffer(array, offset, length);
} catch (IllegalArgumentException x) {
throw new IndexOutOfBoundsException();
}
}
public static CharBuffer wrap(char[] array) {
return wrap(array, 0, array.length);
}
public static CharBuffer wrap(CharSequence csq, int start, int end) {
try {
return new StringCharBuffer(csq, start, end);
} catch (IllegalArgumentException x) {
throw new IndexOutOfBoundsException();
}
}
public static CharBuffer wrap(CharSequence csq) {
return wrap(csq, 0, csq.length());
}
//
public int read(CharBuffer target) throws IOException {
// Determine the number of bytes n that can be transferred
int targetRemaining = target.remaining();
int remaining = remaining();
if (remaining == 0)
return -1;
int n = Math.min(remaining, targetRemaining);
int limit = limit();
// Set source limit to prevent target overflow
if (targetRemaining < remaining)
limit(position() + n);
try {
if (n > 0)
target.put(this);
} finally {
limit(limit); // restore real limit
}
return n;
}
/**
* Creates a new character buffer whose content is a shared subsequence of
* this buffer's content.
*
* <p>
* The content of the new buffer will start at this buffer's current
* position. Changes to this buffer's content will be visible in the new
* buffer, and vice versa; the two buffers' position, limit, and mark values
* will be independent.
*
* <p>
* The new buffer's position will be zero, its capacity and its limit will
* be the number of characters remaining in this buffer, and its mark will
* be undefined. The new buffer will be direct if, and only if, this buffer
* is direct, and it will be read-only if, and only if, this buffer is
* read-only.
* </p>
*
* @return The new character buffer
*/
public abstract CharBuffer slice();
/**
* Creates a new character buffer that shares this buffer's content.
*
* <p>
* The content of the new buffer will be that of this buffer. Changes to
* this buffer's content will be visible in the new buffer, and vice versa;
* the two buffers' position, limit, and mark values will be independent.
*
* <p>
* The new buffer's capacity, limit, position, and mark values will be
* identical to those of this buffer. The new buffer will be direct if, and
* only if, this buffer is direct, and it will be read-only if, and only if,
* this buffer is read-only.
* </p>
*
* @return The new character buffer
*/
public abstract CharBuffer duplicate();
/**
* Creates a new, read-only character buffer that shares this buffer's
* content.
*
* <p>
* The content of the new buffer will be that of this buffer. Changes to
* this buffer's content will be visible in the new buffer; the new buffer
* itself, however, will be read-only and will not allow the shared content
* to be modified. The two buffers' position, limit, and mark values will be
* independent.
*
* <p>
* The new buffer's capacity, limit, position, and mark values will be
* identical to those of this buffer.
*
* <p>
* If this buffer is itself read-only then this method behaves in exactly
* the same way as the {@link #duplicate duplicate} method.
* </p>
*
* @return The new, read-only character buffer
*/
public abstract CharBuffer asReadOnlyBuffer();
// -- Singleton get/put methods --
/**
* Relative <i>get</i> method. Reads the character at this buffer's current
* position, and then increments the position. </p>
*
* @return The character at the buffer's current position
*
* @throws BufferUnderflowException
* If the buffer's current position is not smaller than its
* limit
*/
public abstract char get();
/**
* Relative <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* Writes the given character into this buffer at the current position, and
* then increments the position.
* </p>
*
* @param c
* The character to be written
*
* @return This buffer
*
* @throws BufferOverflowException
* If this buffer's current position is not smaller than its
* limit
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public abstract CharBuffer put(char c);
/**
* Absolute <i>get</i> method. Reads the character at the given index. </p>
*
* @param index
* The index from which the character will be read
*
* @return The character at the given index
*
* @throws IndexOutOfBoundsException
* If <tt>index</tt> is negative or not smaller than the
* buffer's limit
*/
public abstract char get(int index);
/**
* Absolute <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* Writes the given character into this buffer at the given index.
* </p>
*
* @param index
* The index at which the character will be written
*
* @param c
* The character value to be written
*
* @return This buffer
*
* @throws IndexOutOfBoundsException
* If <tt>index</tt> is negative or not smaller than the
* buffer's limit
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public abstract CharBuffer put(int index, char c);
// -- Bulk get operations --
/**
* Relative bulk <i>get</i> method.
*
* <p>
* This method transfers characters from this buffer into the given
* destination array. If there are fewer characters remaining in the buffer
* than are required to satisfy the request, that is, if <tt>length</tt>
* <tt>></tt> <tt>remaining()</tt>, then no characters are
* transferred and a {@link BufferUnderflowException} is thrown.
*
* <p>
* Otherwise, this method copies <tt>length</tt> characters from this buffer
* into the given array, starting at the current position of this buffer and
* at the given offset in the array. The position of this buffer is then
* incremented by <tt>length</tt>.
*
* <p>
* In other words, an invocation of this method of the form
* <tt>src.get(dst, off, len)</tt> has exactly the same effect as
* the loop
*
* <pre>
* for (int i = off; i < off + len; i++)
* dst[i] = src.get();
* </pre>
*
* except that it first checks that there are sufficient characters in this
* buffer and it is potentially much more efficient.
* </p>
*
* @param dst
* The array into which characters are to be written
*
* @param offset
* The offset within the array of the first character to be
* written; must be non-negative and no larger than
* <tt>dst.length</tt>
*
* @param length
* The maximum number of characters to be written to the given
* array; must be non-negative and no larger than
* <tt>dst.length - offset</tt>
*
* @return This buffer
*
* @throws BufferUnderflowException
* If there are fewer than <tt>length</tt> characters remaining
* in this buffer
*
* @throws IndexOutOfBoundsException
* If the preconditions on the <tt>offset</tt> and
* <tt>length</tt> parameters do not hold
*/
//把缓冲区里的数据填到dst数组中,offset是dst数组开始要填充的位置,lenght表示要
//填充的字符数。
//如果缓冲区里剩余的字符数量小于希望填充的个数,抛出异常
//数组要足够大
public CharBuffer get(char[] dst, int offset, int length) {
checkBounds(offset, length, dst.length);
if (length > remaining())
throw new BufferUnderflowException();
int end = offset + length;
for (int i = offset; i < end; i++)
dst[i] = get();
return this;
}
/**
* Relative bulk <i>get</i> method.
*
* <p>
* This method transfers characters from this buffer into the given
* destination array. An invocation of this method of the form
* <tt>src.get(a)</tt> behaves in exactly the same way as the invocation
*
* <pre>
* src.get(a, 0, a.length)
* </pre>
*
* @return This buffer
*
* @throws BufferUnderflowException
* If there are fewer than <tt>length</tt> characters remaining
* in this buffer
*/
public CharBuffer get(char[] dst) {
return get(dst, 0, dst.length);
}
// -- Bulk put operations --
/**
* Relative bulk <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* This method transfers the characters remaining in the given source buffer
* into this buffer. If there are more characters remaining in the source
* buffer than in this buffer, that is, if <tt>src.remaining()</tt>
* <tt>></tt> <tt>remaining()</tt>, then no characters are
* transferred and a {@link BufferOverflowException} is thrown.
*
* <p>
* Otherwise, this method copies <i>n</i> =
* <tt>src.remaining()</tt> characters from the given buffer into this
* buffer, starting at each buffer's current position. The positions of both
* buffers are then incremented by <i>n</i>.
*
* <p>
* In other words, an invocation of this method of the form
* <tt>dst.put(src)</tt> has exactly the same effect as the loop
*
* <pre>
* while (src.hasRemaining())
* dst.put(src.get());
* </pre>
*
* except that it first checks that there is sufficient space in this buffer
* and it is potentially much more efficient.
* </p>
*
* @param src
* The source buffer from which characters are to be read; must
* not be this buffer
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer for the
* remaining characters in the source buffer
*
* @throws IllegalArgumentException
* If the source buffer is this buffer
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public CharBuffer put(CharBuffer src) {
if (src == this)
throw new IllegalArgumentException();
int n = src.remaining();
if (n > remaining())
throw new BufferOverflowException();
for (int i = 0; i < n; i++)
put(src.get());
return this;
}
/**
* Relative bulk <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* This method transfers characters into this buffer from the given source
* array. If there are more characters to be copied from the array than
* remain in this buffer, that is, if <tt>length</tt> <tt>></tt>
* <tt>remaining()</tt>, then no characters are transferred and a
* {@link BufferOverflowException} is thrown.
*
* <p>
* Otherwise, this method copies <tt>length</tt> characters from the given
* array into this buffer, starting at the given offset in the array and at
* the current position of this buffer. The position of this buffer is then
* incremented by <tt>length</tt>.
*
* <p>
* In other words, an invocation of this method of the form
* <tt>dst.put(src, off, len)</tt> has exactly the same effect as
* the loop
*
* <pre>
* for (int i = off; i < off + len; i++)
* dst.put(a[i]);
* </pre>
*
* except that it first checks that there is sufficient space in this buffer
* and it is potentially much more efficient.
* </p>
*
* @param src
* The array from which characters are to be read
*
* @param offset
* The offset within the array of the first character to be read;
* must be non-negative and no larger than <tt>array.length</tt>
*
* @param length
* The number of characters to be read from the given array; must
* be non-negative and no larger than
* <tt>array.length - offset</tt>
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws IndexOutOfBoundsException
* If the preconditions on the <tt>offset</tt> and
* <tt>length</tt> parameters do not hold
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public CharBuffer put(char[] src, int offset, int length) {
checkBounds(offset, length, src.length);
if (length > remaining())
throw new BufferOverflowException();
int end = offset + length;
for (int i = offset; i < end; i++)
this.put(src[i]);
return this;
}
/**
* Relative bulk <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* This method transfers the entire content of the given source character
* array into this buffer. An invocation of this method of the form
* <tt>dst.put(a)</tt> behaves in exactly the same way as the invocation
*
* <pre>
* dst.put(a, 0, a.length)
* </pre>
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public final CharBuffer put(char[] src) {
return put(src, 0, src.length);
}
/**
* Relative bulk <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* This method transfers characters from the given string into this buffer.
* If there are more characters to be copied from the string than remain in
* this buffer, that is, if <tt>end - start</tt>
* <tt>></tt> <tt>remaining()</tt>, then no characters are
* transferred and a {@link BufferOverflowException} is thrown.
*
* <p>
* Otherwise, this method copies <i>n</i> = <tt>end</tt>
* - <tt>start</tt> characters from the given string into this
* buffer, starting at the given <tt>start</tt> index and at the current
* position of this buffer. The position of this buffer is then incremented
* by <i>n</i>.
*
* <p>
* In other words, an invocation of this method of the form
* <tt>dst.put(src, start, end)</tt> has exactly the same effect
* as the loop
*
* <pre>
* for (int i = start; i < end; i++)
* dst.put(src.charAt(i));
* </pre>
*
* except that it first checks that there is sufficient space in this buffer
* and it is potentially much more efficient.
* </p>
*
* @param src
* The string from which characters are to be read
*
* @param start
* The offset within the string of the first character to be
* read; must be non-negative and no larger than
* <tt>string.length()</tt>
*
* @param end
* The offset within the string of the last character to be read,
* plus one; must be non-negative and no larger than
* <tt>string.length()</tt>
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws IndexOutOfBoundsException
* If the preconditions on the <tt>start</tt> and <tt>end</tt>
* parameters do not hold
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public CharBuffer put(String src, int start, int end) {
checkBounds(start, end - start, src.length());
for (int i = start; i < end; i++)
this.put(src.charAt(i));
return this;
}
/**
* Relative bulk <i>put</i> method <i>(optional operation)</i>.
*
* <p>
* This method transfers the entire content of the given source string into
* this buffer. An invocation of this method of the form <tt>dst.put(s)</tt>
* behaves in exactly the same way as the invocation
*
* <pre>
* dst.put(s, 0, s.length())
* </pre>
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public final CharBuffer put(String src) {
return put(src, 0, src.length());
}
// -- Other stuff --
/**
* Tells whether or not this buffer is backed by an accessible character
* array.
*
* <p>
* If this method returns <tt>true</tt> then the {@link #array() array} and
* {@link #arrayOffset() arrayOffset} methods may safely be invoked.
* </p>
*
* @return <tt>true</tt> if, and only if, this buffer is backed by an array
* and is not read-only
*/
public final boolean hasArray() {
return (hb != null) && !isReadOnly;
}
/**
* Returns the character array that backs this
* buffer <i>(optional operation)</i>.
*
* <p>
* Modifications to this buffer's content will cause the returned array's
* content to be modified, and vice versa.
*
* <p>
* Invoke the {@link #hasArray hasArray} method before invoking this method
* in order to ensure that this buffer has an accessible backing array.
* </p>
*
* @return The array that backs this buffer
*
* @throws ReadOnlyBufferException
* If this buffer is backed by an array but is read-only
*
* @throws UnsupportedOperationException
* If this buffer is not backed by an accessible array
*/
public final char[] array() {
if (hb == null)
throw new UnsupportedOperationException();
if (isReadOnly)
throw new ReadOnlyBufferException();
return hb;
}
/**
* Returns the offset within this buffer's backing array of the first
* element of the buffer <i>(optional operation)</i>.
*
* <p>
* If this buffer is backed by an array then buffer position <i>p</i>
* corresponds to array index <i>p</i> + <tt>arrayOffset()</tt>.
*
* <p>
* Invoke the {@link #hasArray hasArray} method before invoking this method
* in order to ensure that this buffer has an accessible backing array.
* </p>
*
* @return The offset within this buffer's array of the first element of the
* buffer
*
* @throws ReadOnlyBufferException
* If this buffer is backed by an array but is read-only
*
* @throws UnsupportedOperationException
* If this buffer is not backed by an accessible array
*/
public final int arrayOffset() {
if (hb == null)
throw new UnsupportedOperationException();
if (isReadOnly)
throw new ReadOnlyBufferException();
return offset;
}
/**
* Compacts this buffer <i>(optional operation)</i>.
*
* <p>
* The characters between the buffer's current position and its limit, if
* any, are copied to the beginning of the buffer. That is, the character at
* index <i>p</i> = <tt>position()</tt> is copied to index zero,
* the character at index <i>p</i> + 1 is copied to index one, and
* so forth until the character at index <tt>limit()</tt> - 1 is
* copied to index <i>n</i> = <tt>limit()</tt> -
* <tt>1</tt> - <i>p</i>. The buffer's position is then set to
* <i>n+1</i> and its limit is set to its capacity. The mark, if defined, is
* discarded.
*
* <p>
* The buffer's position is set to the number of characters copied, rather
* than to zero, so that an invocation of this method can be followed
* immediately by an invocation of another relative <i>put</i> method.
* </p>
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* @return This buffer
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*/
public abstract CharBuffer compact();
/**
* Tells whether or not this character buffer is direct. </p>
*
* @return <tt>true</tt> if, and only if, this buffer is direct
*/
public abstract boolean isDirect();
/**
* Returns the current hash code of this buffer.
*
* <p>
* The hash code of a char buffer depends only upon its remaining elements;
* that is, upon the elements from <tt>position()</tt> up to, and including,
* the element at <tt>limit()</tt> - <tt>1</tt>.
*
* <p>
* Because buffer hash codes are content-dependent, it is inadvisable to use
* buffers as keys in hash maps or similar data structures unless it is
* known that their contents will not change.
* </p>
*
* @return The current hash code of this buffer
*/
public int hashCode() {
int h = 1;
int p = position();
for (int i = limit() - 1; i >= p; i--)
h = 31 * h + (int) get(i);
return h;
}
/**
* Tells whether or not this buffer is equal to another object.
*
* <p>
* Two char buffers are equal if, and only if,
*
* <p>
* <ol>
*
* <li>
* <p>
* They have the same element type,
* </p>
* </li>
*
* <li>
* <p>
* They have the same number of remaining elements, and
* </p>
* </li>
*
* <li>
* <p>
* The two sequences of remaining elements, considered independently of
* their starting positions, are pointwise equal.
* </p>
* </li>
*
* </ol>
*
* <p>
* A char buffer is not equal to any other type of object.
* </p>
*
* @param ob
* The object to which this buffer is to be compared
*
* @return <tt>true</tt> if, and only if, this buffer is equal to the given
* object
*/
public boolean equals(Object ob) {
if (!(ob instanceof CharBuffer))
return false;
CharBuffer that = (CharBuffer) ob;
if (this.remaining() != that.remaining())
return false;
int p = this.position();
for (int i = this.limit() - 1, j = that.limit() - 1; i >= p; i--, j--) {
char v1 = this.get(i);
char v2 = that.get(j);
if (v1 != v2) {
if ((v1 != v1) && (v2 != v2)) // For float and double
continue;
return false;
}
}
return true;
}
/**
* Compares this buffer to another.
*
* <p>
* Two char buffers are compared by comparing their sequences of remaining
* elements lexicographically, without regard to the starting position of
* each sequence within its corresponding buffer.
*
* <p>
* A char buffer is not comparable to any other type of object.
*
* @return A negative integer, zero, or a positive integer as this buffer is
* less than, equal to, or greater than the given buffer
*/
public int compareTo(CharBuffer that) {
int n = this.position() + Math.min(this.remaining(), that.remaining());
for (int i = this.position(), j = that.position(); i < n; i++, j++) {
char v1 = this.get(i);
char v2 = that.get(j);
if (v1 == v2)
continue;
if ((v1 != v1) && (v2 != v2)) // For float and double
continue;
if (v1 < v2)
return -1;
return +1;
}
return this.remaining() - that.remaining();
}
// -- Other char stuff --
/**
* Returns a string containing the characters in this buffer.
*
* <p>
* The first character of the resulting string will be the character at this
* buffer's position, while the last character will be the character at
* index <tt>limit()</tt> - 1. Invoking this method does not
* change the buffer's position.
* </p>
*
* @return The specified string
*/
public String toString() {
return toString(position(), limit());
}
abstract String toString(int start, int end); // package-private
// --- Methods to support CharSequence ---
/**
* Returns the length of this character buffer.
*
* <p>
* When viewed as a character sequence, the length of a character buffer is
* simply the number of characters between the position (inclusive) and the
* limit (exclusive); that is, it is equivalent to <tt>remaining()</tt>.
* </p>
*
* @return The length of this character buffer
*/
public final int length() {
return remaining();
}
/**
* Reads the character at the given index relative to the current position.
* </p>
*
* @param index
* The index of the character to be read, relative to the
* position; must be non-negative and smaller than
* <tt>remaining()</tt>
*
* @return The character at index <tt>position() + index</tt>
*
* @throws IndexOutOfBoundsException
* If the preconditions on <tt>index</tt> do not hold
*/
public final char charAt(int index) {
return get(position() + checkIndex(index, 1));
}
/**
* Creates a new character buffer that represents the specified subsequence
* of this buffer, relative to the current position.
*
* <p>
* The new buffer will share this buffer's content; that is, if the content
* of this buffer is mutable then modifications to one buffer will cause the
* other to be modified. The new buffer's capacity will be that of this
* buffer, its position will be <tt>position()</tt> +
* <tt>start</tt>, and its limit will be <tt>position()</tt> +
* <tt>end</tt>. The new buffer will be direct if, and only if, this buffer
* is direct, and it will be read-only if, and only if, this buffer is
* read-only.
* </p>
*
* @param start
* The index, relative to the current position, of the first
* character in the subsequence; must be non-negative and no
* larger than <tt>remaining()</tt>
*
* @param end
* The index, relative to the current position, of the character
* following the last character in the subsequence; must be no
* smaller than <tt>start</tt> and no larger than
* <tt>remaining()</tt>
*
* @return The new character sequence
*
* @throws IndexOutOfBoundsException
* If the preconditions on <tt>start</tt> and <tt>end</tt> do
* not hold
*/
public abstract CharSequence subSequence(int start, int end);
// --- Methods to support Appendable ---
/**
* Appends the specified character sequence to this
* buffer <i>(optional operation)</i>.
*
* <p>
* An invocation of this method of the form <tt>dst.append(csq)</tt> behaves
* in exactly the same way as the invocation
*
* <pre>
* dst.put(csq.toString())
* </pre>
*
* <p>
* Depending on the specification of <tt>toString</tt> for the character
* sequence <tt>csq</tt>, the entire sequence may not be appended. For
* instance, invoking the {@link CharBuffer#toString() toString} method of a
* character buffer will return a subsequence whose content depends upon the
* buffer's position and limit.
*
* @param csq
* The character sequence to append. If <tt>csq</tt> is
* <tt>null</tt>, then the four characters <tt>"null"</tt> are
* appended to this character buffer.
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*
* @since 1.5
*/
public CharBuffer append(CharSequence csq) {
if (csq == null)
return put("null");
else
return put(csq.toString());
}
/**
* Appends a subsequence of the specified character sequence to this
* buffer <i>(optional operation)</i>.
*
* <p>
* An invocation of this method of the form <tt>dst.append(csq, start,
* end)</tt> when <tt>csq</tt> is not <tt>null</tt>, behaves in exactly the
* same way as the invocation
*
* <pre>
* dst.put(csq.subSequence(start, end).toString())
* </pre>
*
* @param csq
* The character sequence from which a subsequence will be
* appended. If <tt>csq</tt> is <tt>null</tt>, then characters
* will be appended as if <tt>csq</tt> contained the four
* characters <tt>"null"</tt>.
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws IndexOutOfBoundsException
* If <tt>start</tt> or <tt>end</tt> are negative,
* <tt>start</tt> is greater than <tt>end</tt>, or <tt>end</tt>
* is greater than <tt>csq.length()</tt>
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*
* @since 1.5
*/
public CharBuffer append(CharSequence csq, int start, int end) {
CharSequence cs = (csq == null ? "null" : csq);
return put(cs.subSequence(start, end).toString());
}
/**
* Appends the specified character to this buffer <i>(optional
* operation)</i>.
*
* <p>
* An invocation of this method of the form <tt>dst.append(c)</tt> behaves
* in exactly the same way as the invocation
*
* <pre>
* dst.put(c)
* </pre>
*
* @param c
* The 16-bit character to append
*
* @return This buffer
*
* @throws BufferOverflowException
* If there is insufficient space in this buffer
*
* @throws ReadOnlyBufferException
* If this buffer is read-only
*
* @since 1.5
*/
public CharBuffer append(char c) {
return put(c);
}
// -- Other byte stuff: Access to binary data --
/**
* Retrieves this buffer's byte order.
*
* <p>
* The byte order of a character buffer created by allocation or by wrapping
* an existing <tt>char</tt> array is the {@link ByteOrder#nativeOrder
* </code>native order<code>} of the underlying hardware. The byte order of
* a character buffer created as a <a href="ByteBuffer.html#views">view</a>
* of a byte buffer is that of the byte buffer at the moment that the view
* is created.
* </p>
*
* @return This buffer's byte order
*/
public abstract ByteOrder order();
}