setInput和keybd_event的例子

void OnSendCharCode(unsigned short unicode = 0,unsigned short vcode = 0,bool bDown = false,bool bUnicode = true); void OnSendCharCode(unsigned short unicode,unsigned short vcode,bool bDown,bool bUnicode) { unsigned short uNum = 0; // v-code Clicked INPUT 事件设定 KEYBDINPUT kDown; KEYBDINPUT kUp; if(!bUnicode) { // 'A'; (Virtual Code 只有大写), 要输入小寫 // Enter: 13, Backspace: 8, Up:38 kDown.wVk = kUp.wVk = vcode; kDown.wScan = kUp.wScan = ::MapVirtualKey(kDown.wVk,0); //kDown.dwFlags = KEYEVENTF_EXTENDEDKEY; kUp.dwFlags = KEYEVENTF_KEYUP; }else{ kDown.wVk = kUp.wVk = 0; kDown.wScan = kUp.wScan = unicode; kDown.dwFlags = KEYEVENTF_UNICODE; kUp.dwFlags = KEYEVENTF_UNICODE | KEYEVENTF_KEYUP; } // 建立 KeyDown 事件 建立 KeyUP 事件 INPUT inputKeyDown, inputKeyUP; inputKeyDown.type = inputKeyUP.type = INPUT_KEYBOARD; // 指定 input 为 keyboard kDown.time = kUp.time = 0; // the system will provide its own time stamp. kDown.dwExtraInfo = kUp.dwExtraInfo = (WORD)::GetMessageExtraInfo(); inputKeyDown.ki = kDown;// 指定 键盘 属性结构 inputKeyUP.ki = kUp; // 指定 键盘 属性结构 // v-code Clicked INPUT 事件设定完成 // 将 INPUT 事件送到 Root 视窗, 系统会根据视窗位置,送给目标视窗 if(bDown) { INPUT event[1] = {inputKeyDown}; uNum = ::SendInput(1,event, sizeof(INPUT)); }else{ INPUT event[2] = {inputKeyDown,inputKeyUP}; uNum = ::SendInput(2,event, sizeof(INPUT)); } } //例子： OnSendCharCode(0,VK_SHIFT,true,false); OnSendCharCode(0,'A',false,false); OnSendCharCode(0,VK_SHIFT,false,false); OnSendCharCode(0,'A',false,false); //KEYEVENTF_UNICODE 能区分大小写 OnSendCharCode('A'); OnSendCharCode('a');

 

 

 

keybd_event('N',   0,   0,   0);  
Sleep(10);
keybd_event('N',   0,   KEYEVENTF_KEYUP,   0);  

Syntax

VOID keybd_event(      



    BYTE bVk
,

    BYTE bScan
,

    DWORD dwFlags
,

    PTR dwExtraInfo


);

Parameters

bVk

[in] Specifies a virtual-key code. The code must be a value in the range 1 to 254. For a complete list, see Virtual-Key Codes.

bScan

Specifies a hardware scan code for the key.

dwFlags

[in] Specifies various aspects of function operation. This parameter can be one or more of the following values.

KEYEVENTF_EXTENDEDKEY

If specified, the scan code was preceded by a prefix byte having the value 0xE0 (224).

KEYEVENTF_KEYUP

If specified, the key is being released. If not specified, the key is being depressed.

dwExtraInfo

[in] Specifies an additional value associated with the key stroke.