Qlogic光纤卡安装配置记录及参考

Qlogic光纤卡安装配置记录及参考 Last Updated: Saturday, 2004-11-06 19:59 Eygle

Qlogic光纤卡安装配置相对简单，但是同样的，为了是主机可以识别多个LUN信息，需要修改sd.conf配置文件。   以下是我的sd.conf的配置，供参考: # # Copyright (c) 1992, by Sun Microsystems, Inc. # #ident "@(#)sd.conf 1.9 98/01/11 SMI" name="sd" class="scsi" class_prop="atapi" target=0 lun=0; name="sd" class="scsi" class_prop="atapi" target=1 lun=0; name="sd" class="scsi" class_prop="atapi" target=2 lun=0; name="sd" class="scsi" class_prop="atapi" target=3 lun=0; name="sd" class="scsi" target=4 lun=0; name="sd" class="scsi" target=5 lun=0; name="sd" class="scsi" target=6 lun=0; name="sd" class="scsi" target=8 lun=0; name="sd" class="scsi" target=9 lun=0; name="sd" class="scsi" target=10 lun=0; name="sd" class="scsi" target=11 lun=0; name="sd" class="scsi" target=12 lun=0; name="sd" class="scsi" target=13 lun=0; name="sd" class="scsi" target=14 lun=0; name="sd" class="scsi" target=15 lun=0; name="sd" parent="qla2300" target=0 lun=0; name="sd" parent="qla2300" target=0 lun=1; name="sd" parent="qla2300" target=0 lun=2; name="sd" parent="qla2300" target=0 lun=3; name="sd" parent="qla2300" target=0 lun=4; name="sd" parent="qla2300" target=0 lun=5; name="sd" parent="qla2300" target=0 lun=6; name="sd" parent="qla2300" target=0 lun=7; name="sd" parent="qla2300" target=1 lun=0; name="sd" parent="qla2300" target=1 lun=1; name="sd" parent="qla2300" target=1 lun=2; name="sd" parent="qla2300" target=1 lun=3; name="sd" parent="qla2300" target=1 lun=4; name="sd" parent="qla2300" target=1 lun=5; name="sd" parent="qla2300" target=1 lun=6; name="sd" parent="qla2300" target=1 lun=7; name="sd" parent="qla2300" target=2 lun=0; name="sd" parent="qla2300" target=3 lun=0; name="sd" parent="qla2300" target=4 lun=0; name="sd" parent="qla2300" target=5 lun=0; name="sd" parent="qla2300" target=6 lun=0; name="sd" parent="qla2300" target=7 lun=0; name="sd" parent="qla2300" target=8 lun=0; name="sd" parent="qla2300" target=9 lun=0; name="sd" parent="qla2300" target=10 lun=0; name="sd" parent="qla2300" target=11 lun=0; name="sd" parent="qla2300" target=12 lun=0; name="sd" parent="qla2300" target=13 lun=0; name="sd" parent="qla2300" target=14 lun=0; name="sd" parent="qla2300" target=15 lun=0; name="sd" parent="qla2300" target=16 lun=0; name="sd" parent="qla2300" target=17 lun=0; name="sd" parent="qla2300" target=17 lun=1; name="sd" parent="qla2300" target=17 lun=2; name="sd" parent="qla2300" target=17 lun=3;   配置完成以后，使用reboot -- -r选项重新启动主机系统，之后可以正常发现分配给主机系统的多个LUN。   # format Searching for disks...done c2t2d0: configured with capacity of 133.21GB c2t2d1: configured with capacity of 266.41GB c2t2d2: configured with capacity of 199.81GB c2t2d3: configured with capacity of 60.00GB c2t2d4: configured with capacity of 1023.94MB c2t2d5: configured with capacity of 133.21GB c2t2d6: configured with capacity of 60.00GB c2t2d7: configured with capacity of 1023.94MB c2t3d0: configured with capacity of 133.21GB c2t3d1: configured with capacity of 266.41GB c2t3d2: configured with capacity of 199.81GB c2t3d3: configured with capacity of 60.00GB c2t3d4: configured with capacity of 1023.94MB c2t3d5: configured with capacity of 133.21GB c2t3d6: configured with capacity of 60.00GB c2t3d7: configured with capacity of 1023.94MB c3t2d0: configured with capacity of 133.21GB c3t2d1: configured with capacity of 266.41GB c3t2d2: configured with capacity of 199.81GB c3t2d3: configured with capacity of 60.00GB c3t2d4: configured with capacity of 1023.94MB c3t2d5: configured with capacity of 133.21GB c3t2d6: configured with capacity of 60.00GB c3t2d7: configured with capacity of 1023.94MB c3t3d0: configured with capacity of 133.21GB c3t3d1: configured with capacity of 266.41GB c3t3d2: configured with capacity of 199.81GB c3t3d3: configured with capacity of 60.00GB c3t3d4: configured with capacity of 1023.94MB c3t3d5: configured with capacity of 133.21GB c3t3d6: configured with capacity of 60.00GB c3t3d7: configured with capacity of 1023.94MB emcpower0a: configured with capacity of 133.21GB emcpower1a: configured with capacity of 1023.94MB emcpower2a: configured with capacity of 60.00GB emcpower3a: configured with capacity of 133.21GB emcpower4a: configured with capacity of 1023.94MB emcpower5a: configured with capacity of 60.00GB emcpower6a: configured with capacity of 199.81GB emcpower7a: configured with capacity of 266.41GB AVAILABLE DISK SELECTIONS: 0. c1t0d0 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01077a8d1,0 1. c1t1d0 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01077cb01,0 2. c1t2d0 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107823d1,0 3. c1t3d0 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010782471,0 4. c1t4d0 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107a6b21,0 5. c1t5d0 /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107aacc1,0 6. c2t2d0 /pci@9,700000/fibre-channel@4/sd@2,0 7. c2t2d1 /pci@9,700000/fibre-channel@4/sd@2,1 8. c2t2d2 /pci@9,700000/fibre-channel@4/sd@2,2 9. c2t2d3 /pci@9,700000/fibre-channel@4/sd@2,3 10. c2t2d4 /pci@9,700000/fibre-channel@4/sd@2,4 11. c2t2d5 /pci@9,700000/fibre-channel@4/sd@2,5 12. c2t2d6 /pci@9,700000/fibre-channel@4/sd@2,6 13. c2t2d7 /pci@9,700000/fibre-channel@4/sd@2,7 14. c2t3d0 /pci@9,700000/fibre-channel@4/sd@3,0 15. c2t3d1 /pci@9,700000/fibre-channel@4/sd@3,1 16. c2t3d2 /pci@9,700000/fibre-channel@4/sd@3,2 17. c2t3d3 /pci@9,700000/fibre-channel@4/sd@3,3 18. c2t3d4 /pci@9,700000/fibre-channel@4/sd@3,4 19. c2t3d5 /pci@9,700000/fibre-channel@4/sd@3,5 20. c2t3d6 /pci@9,700000/fibre-channel@4/sd@3,6 21. c2t3d7 /pci@9,700000/fibre-channel@4/sd@3,7 22. c3t2d0 /pci@8,700000/fibre-channel@4/sd@2,0 23. c3t2d1 /pci@8,700000/fibre-channel@4/sd@2,1 24. c3t2d2 /pci@8,700000/fibre-channel@4/sd@2,2 25. c3t2d3 /pci@8,700000/fibre-channel@4/sd@2,3 26. c3t2d4 /pci@8,700000/fibre-channel@4/sd@2,4 27. c3t2d5 /pci@8,700000/fibre-channel@4/sd@2,5 28. c3t2d6 /pci@8,700000/fibre-channel@4/sd@2,6 29. c3t2d7 /pci@8,700000/fibre-channel@4/sd@2,7 30. c3t3d0 /pci@8,700000/fibre-channel@4/sd@3,0 31. c3t3d1 /pci@8,700000/fibre-channel@4/sd@3,1 32. c3t3d2 /pci@8,700000/fibre-channel@4/sd@3,2 33. c3t3d3 /pci@8,700000/fibre-channel@4/sd@3,3 34. c3t3d4 /pci@8,700000/fibre-channel@4/sd@3,4 35. c3t3d5 /pci@8,700000/fibre-channel@4/sd@3,5 36. c3t3d6 /pci@8,700000/fibre-channel@4/sd@3,6 37. c3t3d7 /pci@8,700000/fibre-channel@4/sd@3,7 38. emcpower0a /pseudo/emcp@0 39. emcpower1a /pseudo/emcp@1 40. emcpower2a /pseudo/emcp@2 41. emcpower3a /pseudo/emcp@3 42. emcpower4a /pseudo/emcp@4 43. emcpower5a /pseudo/emcp@5 44. emcpower6a /pseudo/emcp@6 45. emcpower7a /pseudo/emcp@7 Specify disk (enter its number): 1 selecting c1t1d0 [disk formatted] FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision volname - set 8-character volume name ! - execute , then return quit format> q #   使用powerpath查看通路状态:   # powermt display dev=all Pseudo name=emcpower6a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A91000004B1E21C02FD911 [LUN 5] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d2s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d2s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d2s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d2s0 SP B0 active alive 0 0 Pseudo name=emcpower3a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A910002070EBBEBF2FD911 [LUN 2] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP B, current=SP B ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d5s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d5s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d5s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d5s0 SP B0 active alive 0 0 Pseudo name=emcpower1a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A9100030349D70BF2FD911 [LUN 0] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP B, current=SP B ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d7s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d7s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d7s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d7s0 SP B0 active alive 0 0 Pseudo name=emcpower5a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A9100034F5B208C02FD911 [LUN 4] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d3s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d3s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d3s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d3s0 SP B0 active alive 0 0 Pseudo name=emcpower2a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A9100050F80AA1BF2FD911 [LUN 1] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP B, current=SP B ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d6s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d6s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d6s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d6s0 SP B0 active alive 0 0 Pseudo name=emcpower7a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A910005CD3952EC02FD911 [LUN 6] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d1s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d1s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d1s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d1s0 SP B0 active alive 0 0 Pseudo name=emcpower4a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A910007EFC11F4BF2FD911 [LUN 3] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d4s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d4s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d4s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d4s0 SP B0 active alive 0 0 Pseudo name=emcpower0a CLARiiON ID=CK200041200044 [db880-1] Logical device ID=60060160D2A9100096E1432DC62FD911 [LUN 7] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP B ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 1281 pci@9/fibre-channel@4 c2t2d0s0 SP A1 active alive 0 0 1281 pci@9/fibre-channel@4 c2t3d0s0 SP B1 active alive 0 0 1280 pci@8/fibre-channel@4 c3t2d0s0 SP A0 active alive 0 0 1280 pci@8/fibre-channel@4 c3t3d0s0 SP B0 active alive 0 0   作为对比，你可以参考一下Emulex光纤卡的配置方法: http://www.eygle.com/unix/Emulex_LightPulse_FC9002L_Solaris9_Install.htm     本文作者: eygle,Oracle技术关注者,来自中国最大的Oracle技术论坛itpub. www.eygle.com是作者的个人站点.你可通过Guoqiang.Gai@gmail.com来联系作者.欢迎技术探讨交流以及链接交换. 原文出处: http://www.eygle.com/unix/Qlogic.HBA.Config.log.htm