蓝桥杯嵌入式第七届决赛-温、湿度监控设备

最新推荐文章于 2022-02-25 17:06:50 发布

fancyZT

最新推荐文章于 2022-02-25 17:06:50 发布

阅读量639

点赞数 1

分类专栏：蓝桥杯嵌入式

本文链接：https://blog.csdn.net/fancyZT/article/details/105409463

版权

一、题目
在这里插入图片描述
二、代码
1.初始化函数
tx.c

#include "tx.h"

void LED_Init(void){
   
  GPIO_InitTypeDef GPIO_InitStructure;
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC|RCC_APB2Periph_GPIOD, ENABLE);
	
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
  
  GPIO_InitStructure.GPIO_Pin = 0xff00;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
  
  GPIOD->ODR|=(1<<2);
  GPIOC->ODR|=0xff00;
  GPIOD->ODR&=~(1<<2);
}

void KEY_Init(void){
   
  GPIO_InitTypeDef   GPIO_InitStructure;
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOB, ENABLE);
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_8;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIOA, &GPIO_InitStructure);

  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
	
}

u8 key_status[4]={
   1,1,1,1};

void KEY_Driver(void){
   
  u8 i;
  static u8 backup[4]={
   1,1,1,1};
  for(i=0;i<4;i++){
   
	if(backup[i]!=key_status[i]){
   
	  if(backup[i]!=0){
   
		Key_action(i+1);  
	  }	
	  backup[i]=key_status[i];
	}  	  
  }  
}

void KEY_Scan(void){
   
  u8 i;
  static u8 Key_buf[4]={
   0xff,0xff,0xff,0xff};
  Key_buf[0]=(Key_buf[0]<<1)|KEY1;
  Key_buf[1]=(Key_buf[1]<<1)|KEY2;
  Key_buf[2]=(Key_buf[2]<<1)|KEY3;
  Key_buf[3]=(Key_buf[3]<<1)|KEY4;
  for(i=0;i<4;i++){
   
	if(Key_buf[i]==0x00)  
	  key_status[i]=0; 
    else if(Key_buf[i]==0xff)  
	  key_status[i]=1;  
  }
}

void Tim4_Init(u16 arr,u16 psc){
   
  TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
  NVIC_InitTypeDef NVIC_InitStructure;
  
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);
  
  NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
  
  
  TIM_TimeBaseStructure.TIM_Period = arr-1;
  TIM_TimeBaseStructure.TIM_Prescaler = psc-1;
  TIM_TimeBaseStructure.TIM_ClockDivision = 0;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure);
  TIM_ITConfig(TIM4, TIM_IT_Update, ENABLE);
  TIM_Cmd(TIM4, ENABLE);	
	
}

void Adc1_Init(void){
   
  ADC_InitTypeDef ADC_InitStructure;
  GPIO_InitTypeDef GPIO_InitStructure;
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOB, ENABLE);
  
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
  
  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
  ADC_InitStructure.ADC_ScanConvMode = DISABLE;
  ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
  ADC_InitStructure.ADC_NbrOfChannel = 1;
  ADC_Init(ADC1, &ADC_InitStructure);
  ADC_Cmd(ADC1, ENABLE);

  /* Enable ADC1 reset calibration register */   
  ADC_ResetCalibration(ADC1);
  /* Check the end of ADC1 reset calibration register */
  while(ADC_GetResetCalibrationStatus(ADC1));

  /* Start ADC1 calibration */
  ADC_StartCalibration(ADC1);
  /* Check the end of ADC1 calibration */
  while(ADC_GetCalibrationStatus(ADC1));	
	
}

u16 Get_adc(void){
   
  u16 temp;
  ADC_RegularChannelConfig(ADC1, ADC_Channel_8, 1, ADC_SampleTime_239Cycles5);	
  ADC_SoftwareStartConvCmd(ADC1, ENABLE); 	
  while(ADC_GetFlagStatus(ADC1,ADC_FLAG_EOC)==0);
  temp=ADC_GetConversionValue(ADC1);
  ADC_SoftwareStartConvCmd(ADC1, DISABLE);
  return temp;
}

void RTC_Init(u8 HH,u8 MM,u8 SS){
   
  NVIC_InitTypeDef NVIC_InitStructure; 
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
  NVIC_InitStructure.NVIC_IRQChannel = RTC_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
  
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);

  /* Allow access to BKP Domain */
  PWR_BackupAccessCmd(ENABLE);

  /* Reset Backup Domain */
  BKP_DeInit();

  /* Enable the LSI OSC */
  RCC_LSICmd(ENABLE);
  /* Wait till LSI is ready */