tubro c访问 4GB内存

#include    <dos.h>
#define     ASM     __emit__
#define     INT     __int__
#define     BYTE    unsigned char
#define     WORD    unsigned int
#define     DWORD   unsigned long

void SetFS(void)
{
    ASM(0xE8,0x00,0x00,0xEB,0x1F,0x90,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF);
    ASM(0x00,0x00,0x00,0x9A,0x0F,0x00,0xFF,0xFF,0x00,0x00,0x00,0x92,0xCF,0x00,0x17,0x00);
    ASM(0x00,0x00,0x00,0x00,0x5B,0x83,0xEB,0x03,0x1E,0x0E,0x1F,0x01,0x9F,0x56,0x00,0x01);
    ASM(0x9F,0x5E,0x00,0x01,0x9F,0x68,0x00,0x01,0x9F,0x6D,0x00,0x01,0x9F,0x73,0x00,0x01);
    ASM(0x9F,0x7A,0x00,0x01,0x9F,0x7F,0x00,0x01,0x9F,0x93,0x00,0x01,0x9F,0xA6,0x00,0x6A);
    ASM(0x00,0x0E,0x66,0x58,0x2E,0xA3,0xA8,0x00,0x66,0xC1,0xE0,0x04,0x2E,0xA3,0x10,0x00);
    ASM(0x66,0x50,0x66,0x50,0x58,0x58,0x2E,0xA2,0x12,0x00,0x2E,0x88,0x26,0x15,0x00,0x66);
    ASM(0x58,0x66,0x05,0x06,0x00,0x00,0x00,0x66,0x2E,0xA3,0x20,0x00,0x0F,0x01,0x16,0x1E);
    ASM(0x00,0xFA,0xE4,0x92,0x0C,0x02,0xE6,0x92,0x66,0x0F,0x20,0xC0,0x0C,0x01,0x66,0x0F);
    ASM(0x22,0xC0,0xEA,0x97,0x00,0x08,0x00,0x6A,0x10,0x0F,0xA1,0x66,0x0F,0x20,0xC0,0x24);
    ASM(0xFE,0x66,0x0F,0x22,0xC0,0xEA,0xAA,0x00,0x00,0x00,0xFB,0x1F);
}

void DisableA20(void)
{
    ASM(0xFA,0xE4,0x92,0x24,0xFD,0xE6,0x92,0xFB);
}

BYTE ReadByte(DWORD adr)
{
    adr = adr;
    ASM(0x57,0x66,0x8B,0x7E,0x04,0x67,0x64,0x8A,0x07,0x5F);
}

void WriteByte(DWORD adr, BYTE val)
{
    adr = adr;
    val = val;
    ASM(0x57,0x66,0x8B,0x7E,0x04,0x8A,0x46,0x08,0x67,0x64,0x88,0x07,0x5F);
}

/*
      Assemble source file:
CODE            SEGMENT
                ASSUME  CS:CODE
                ORG     0100H
_SetFS:
START:          CALL    $ + 3
                JMP     MAIN
GDT             DD      0,0
CSLL            DW      0FFFFH
CSBL            DW      0
CSBM            DB      0
CSA             DB      9AH
CSLH            DB      0FH; 0CFH
CSBH            DB      0
DSLL            DW      0FFFFH
DSBL            DW      0
DSBM            DB      0
DSA             DB      92H
DSLH            DB      0FH; 0CFH
DSBH            DB      0
VGDTR           DW      $ - GDT - 1
VBASE           DD      0
                ; Get IP
MAIN:           POP     BX
                SUB     BX,3
    PUSH    DS
                PUSH    CS
                POP     DS
                ; redirection
                ADD     [BX + OFFSET $CSEG  - OFFSET START],BX
                ADD     [BX + OFFSET $CSBL  - OFFSET START],BX
                ADD     [BX + OFFSET $CSBM  - OFFSET START],BX
                ADD     [BX + OFFSET $CSBH  - OFFSET START],BX
                ADD     [BX + OFFSET $GDT   - OFFSET START],BX
                ADD     [BX + OFFSET $VBASE - OFFSET START],BX
                ADD     [BX + OFFSET $VGDTR - OFFSET START],BX
                ADD     [BX + OFFSET $PSA   - OFFSET START],BX
                ADD     [BX + OFFSET $RSA   - OFFSET START],BX
                DB      6AH,00H                 ; PUSH   00H
                PUSH    CS
                DB      66H
                POP     AX                      ; POP    EAX
                DB      2EH,0A3H
$CSEG           DW      OFFSET CSEG - OFFSET START
                                                ; MOV     WORD PTR CS:CSEG,AX
                DB      66H
                DB      0C1H,0E0H,04H           ; SHL    EAX,4
                DB      2EH,0A3H
$CSBL           DW      OFFSET CSBL - OFFSET START
                                                ; MOV     CSBL,AX
                DB      66H
                PUSH    AX                      ; PUSH   EAX
                DB      66H
                PUSH    AX                      ; PUSH   EAX
                POP     AX
                POP     AX
                DB      2EH,0A2H
$CSBM           DW      OFFSET CSBM - OFFSET START
                                                ; MOV     CSBM,AL
                DB      2EH,88H,26H
$CSBH           DW      OFFSET CSBH - OFFSET START
                                                ; MOV     CSBH,AH
                DB      66H
                POP     AX                      ; POP    EAX
                DB      66H,05H
$GDT            DW      OFFSET GDT - OFFSET START
                                                ; ADD     EAX,OFFSET GDT
                DW      0
                DB      66H
                DB      2EH,0A3H
$VBASE          DW      OFFSET VBASE - OFFSET START
                                                ; MOV     DWORD PTR VBASE,EAX
                DB      0FH,01H,16H
$VGDTR          DW      OFFSET VGDTR - OFFSET START
                                                ; LGDT   VGDTR
                CLI
                ; Enable A20 line
                IN      AL,92H
                OR      AL,2
                OUT     92H,AL
                ; Enter protect mode
                DB      66H,0FH,20H,0C0H        ; MOV    EAX,CR0
                OR      AL,1
                DB      66H,0FH,22H,0C0H        ; MOV    CR0,EAX
                DB      0EAH
$PSA            DW      $ + 4 - OFFSET START
                DW      8
                ; Modify FS
                DB      6AH,10H                 ; PUSH   10H
                DB      0FH,0A1H                ; POP    FS
                ; Exit protect mode
                DB      66H,0FH,20H,0C0H        ; MOV    EAX,CR0
                AND     AL,0FEH
                DB      66H,0FH,22H,0C0H        ; MOV    CR0,EAX
                DB      0EAH
$RSA            DW      $ + 4 - OFFSET START
CSEG            DW      0
                STI
                POP     DS
_DisableA20:
                CLI
                IN      AL,92H
                AND     AL,0FDH
                OUT     92H,AL
                STI
_ReadByte:
                ; adr -> EDI
                DB      66H
                MOV     DI,[BP+4]               ; MOV    EDI,[BP+4]
                DB      67H,64H
                ; return AL
                MOV     AL,[BX]                 ; MOV    AL,FS:[EDI]
_WriteByte:
                ; adr -> EDI
                DB      66H
                MOV     DI,[BP+4]               ; MOV    EDI,[BP+4]
                ; val -> AL
                MOV     AL,[BP+8]
                DB      67H,64H
                MOV     [BX],AL                 ; MOV    FS:[EDI],AL
               
CODE            ENDS
                END     START
*/

// test:

void main(void)
{
    DWORD adr = 0xA0000;

    SetFS();

    _AX = 0x4F02;
    _BX = 0x0101;
    INT(16);

    while (adr < 0xB0000)
    {
        WriteByte(adr, 15);
        adr++;
    }

    _AX = 0;
    INT(22);

    _AX = 3;
    INT(16);

    DisableA20();
}