WINCE6.0跑起来了

 2440处理器

遇到的第一个问题：

BUILD: [01:0000001306:ERRORE] NMAKE :  U1073: don't know how to make 'C:/WINCE600/OSDesigns/OSDesign1/OSDesign1/Wince600/smdk2440a_ARMV4I/cesysgen/oak/lib/ARMV4I/debug/ufnmdd.lib'
BUILD: [01:0000001308:ERRORE] NMAKE.EXE TargetLibFiles  -i -c BUILDMSG=Stop.  BUILDROOT=C:/WINCE600/PLATFORM/SMDK2440A CLEANBUILD=1 LINKONLY=1 NOPASS0=1 failed - rc = 2

 

是由于USB驱动引起的，6.0的和5.0的有些库不一样，6.0不用ufnmdd.lib，参考DEVICEEMULATOR

把Function下的SOURCES文件

TARGETLIBS= /
       $(_PROJECTROOT)/cesysgen/sdk/lib/$(_CPUINDPATH)/coredll.lib /
       $(_PROJECTROOT)/cesysgen/oak/lib/$(_CPUINDPATH)/ceddk.lib   /
 

SOURCELIBS= /
       $(_PROJECTROOT)/cesysgen/oak/lib/$(_CPUINDPATH)/ufnmdd.lib /

修改为

 

 

SOURCELIBS= /
    $(_COMMONOAKROOT)/lib/$(_CPUINDPATH)/ufnmddbase.lib

TARGETLIBS= /
    $(_PUBLICROOT)/common/oak/lib/$(_CPUINDPATH)/defbuslib.lib /
    $(_PUBLICROOT)/common/oak/lib/$(_CPUINDPATH)/ceosutil.lib /
    $(_COMMONSDKROOT)/lib/$(_CPUINDPATH)/coredll.lib /
    $(_COMMONOAKROOT)/lib/$(_CPUINDPATH)/ceddk.lib

编译问题解决。

 

问题2：Error: Could not find file 'C:/WINCE600/OSDesigns/OSDesign1/OSDesign1/RelDir/smdk2440a_ARMV4I_Debug/kitl.dll' on disk
kitl.dll C:/WINCE600/OSDesigns/OSDesign1/OSDesign1/RelDir/smdk2440a_ARMV4I_Debug/kitl.dll NK SHZ

由于没有实现KITL所以报这个错误，具体怎么实现的可以参考GOOGLEMAN的博客

http://blog.csdn.net/gooogleman

 

修改/PUBLIC/COMMON/OAK/FILES下的common.bib

IF IMGNOKITLDLL !
    nk.exe          $(_FLATRELEASEDIR)/oal.exe                  NK  SHZ
;    kitl.dll        $(_FLATRELEASEDIR)/kitl.dll                 NK  SHZ
ENDIF IMGNOKITLDLL !

从新编译。

 

Creating rom file C:/WINCE600/OSDesigns/OSDesign1/OSDesign1/RelDir/smdk2440a_ARMV4I_Debug/NK.nb0
Done!
makeimg: Check for C:/WINCE600/OSDesigns/OSDesign1/OSDesign1/RelDir/smdk2440a_ARMV4I_Debug/PostRomImage.bat to run.
makeimg: Check for C:/WINCE600/OSDesigns/OSDesign1/OSDesign1/RelDir/smdk2440a_ARMV4I_Debug/PostMakeImg.bat to run.
makeimg: Change directory to C:/WINCE600.
makeimg: run command: cmd /C C:/WINCE600/public/common/oak/misc/pbpostmakeimg
C:/WINCE600/PLATFORM/SMDK2440A/src/dirs - 0 error(s), 23 warning(s)
========== 生成: 1 成功或最新，0 失败，0 被跳过 ==========

成功了！！！

下到开发板里可以启动，触摸不准，校正之后OK.

接下来移植矩阵键盘驱动，头大啊，要注册6个中断，怎么注册啊，有人做过没指点下。