今天做一个小产品,需要使用低成本的stm8s003, 焊接了最小电路图,然后安装好IAR for stm8, 破解好,然后使用st-link来debug,出现了No answer from the SWIM: check chip connections and power supply; try a power on reset 这个问题,百思不得其解,然后找到一篇文章说,VCAP脚的电容没有焊接,赶紧试试,发现真的是这么回事,这个不能省,我是因为刚好找不到1uF的电容,所以才没有焊接上去,想不到就是因为这个原因,反省一下
调试STM8S003,IAR,No answer from the SWIM: check chip connections and power supply
IAR for stm8今天做一个小产品,需要使用低成本的stm8s003,焊接了最小电路图,然后安装好IAR for stm8, 破解好,然后使用st-link来debug,出现了No answer from the SWIM: check chip connections and power supply; try a power on reset 这个问题,百思不得其解,然后找到一篇文章说,VCAP脚的电容没有焊接,赶紧试试,发现真的是这么回事,这个不能省,我是因为刚好找不到1uF的电容,所以才