you appear to be running an x server please exit x before installing

最新推荐文章于 2023-04-11 11:04:30 发布
最新推荐文章于 2023-04-11 11:04:30 发布
阅读量1k 收藏 5
点赞数

you appear to be running an x server please exit x before installing

2016年09月20日 17:14:33 jsa158 阅读数：12952

版权声明：本文为博主原创文章，未经博主允许不得转载。 https://blog.csdn.net/jsa158/article/details/52597931

按住ctrl+alt+F1 进入控制台
sudo init 3 注意空格 会做掉x
rm /tmp/.X*
上面的命令是删掉X 的锁文件
再次cd 到.run文件所在目录
再次执行 sudo ./.run文件
最后reboot 重启电脑。

若遇到安装完cuda开发包，密码正确却无法登陆进Ubuntu 界面系统，则可以进入控制台手动安装一下GPU卡的驱动，然后重启即可

ctrl+alt+F7回到图形界面。

fighter_zzh
关注
  • 0
    点赞
  • 踩
  • 5
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
cp201x资源启动程序
05-20
Install driver for USB-UART bridge converter on Linux Ubuntu12.04 Ubuntu下USB转串口芯片驱动程序安装，支持cp210x,pl2303等 Reference: Fixing the cp210x open - Unable to enable UART Error When you plugin your USB-UART converter, and run "> ls /dev/tty*", if you don't see the /dev/ttyUSB0 (or similar), your Linux does not detect your USB-UART device. We need to install the driver for your device. Here we use Ubuntu12.04, and Updated the source to 3.2.0 version. If there is difference about version Number from your OS platform, please try to modify it into yours. 1.Download the Linux Source Code Open a terminal and execute the following commands. Note that your version of Linux may differ slightly -- adjust accordingly. $ cd ~ $ sudo apt-get install build-essential linux-source $ cp /usr/src/linux-source-3.2.0.tar.bz2 . $ bunzip2 linux-source-3.2.0.tar.bz2 $ tar xf linux-source-3.2.0.tar $ cd ~/linux-source-3.2.0 2.Recompile and Reinstall the cp210x Driver From within a terminal, execute: $ cd ~/linux-source-3.2.0 $ make oldconfig $ make prepare $ make scripts $ cp /usr/src/linux-headers-3.2.0-34-generic-pae/Module.symvers . Here, I have the "3.2.0-29" version also, I launched the command above, but not the below: "cp /usr/src/linux-headers-3.2.0-29-generic-pae/Module.symvers ." Recompile and Reinstall the cp210x Driver Here, We can actually install many kinds of USB-UART converter drivers. We take cp210x as the example. From within a terminal, execute: $ make M=drivers/usb/serial $ sudo mv /lib/modules/$(uname -r)/kernel/drivers/usb/serial/cp210x.ko /lib/modules/$(uname -r)/kernel/drivers/usb/serial/cp210x.ko.old $ sudo cp drivers/usb/serial/cp210x.ko /lib/modules/$(uname -r)/kernel/drivers/usb/serial/ $ sudo modprobe -r cp210x $ sudo modprobe cp210x Reboot Linux system. Run Terminal: $ ls /dev/tty* The we can see the device is detected by Linux Host OS: 【技术】Ubuntu下USB转串口芯片驱动程序安装cp210x,pl2303 Reference: http://pharos.ece.utexas.edu/wiki/index.php/Fixing_the_cp210x_open_-_Unable_to_enable_UART_Error_-_04/17/2011 Then, We can configure the minicom to communicate with our target board. ====================================================== Here is an example of configure the parameters of minicom for TLL6527M PAL board: I just copied it here hardly without any font editing. Sorry about that. Serial Communications from Host-PC to TLL6527M Target Hardware The TLL System Design Environment (SDE) running on the host PC comes pre-configured with the required settings for serial-UART communications between the host PC and the TLL6527M base module. Generally, for use with TLL6527M the settings need not to be changed (Note: From the SDE OS version 0.3.2, the serial terminal program Minicom is set to open /dev/ttyUSB0 with the needed configuration as mentioned above.). To start serial communication from host to the TLL6527M, open the serial communication terminal program Minicom. Just open a terminal window on your Linux SDE running on the host PC and type the command "minicom" at the command prompt on your host PC terminal console. The TLL6527M on power-up is set by default to the following serial-UART communication settings: Bits per second = 115200 Data bits = 8 Parity = None Stop Bits = 1 Flow control = None Make sure that the TLL6527M's USB-UART port has been mapped to a ttyUSBx device node in the /dev folder on the host PC SDE. See following example: 【技术】Ubuntu下USB转串口芯片驱动程序安装cp210x,pl2303 Now make sure that this "ttyUSBx" is set as the destination port, baud rate is 115200, and 8N1 mode for minicom, by running the command 'minicom -s'. Note that running the "minicom -s" command as a normal user will only apply the settings for the current session. In order to make the settings permanent, these commands need to be run with root privileges.See example below: 【技术】Ubuntu下USB转串口芯片驱动程序安装cp210x,pl2303 The following window will appear on your host PC terminal window: 【技术】Ubuntu下USB转串口芯片驱动程序安装cp210x,pl2303 Go to ‘Serial port setup’, following screen will appear, make sure that serial device is set to ‘/dev/ttyUSB0’ and bps/par/bits is set to 115200 8N1: 【技术】Ubuntu下USB转串口芯片驱动程序安装cp210x,pl2303 Now go back to the main menu and choose ‘save setup as dfl’. This will save the configuration settings and from next time onwards user can directly run ‘minicom’ command without the option ‘–s’ and it will load settings from the saved file. 【技术】Ubuntu下USB转串口芯片驱动程序安装cp210x,pl2303 RESET the target by using the SDE's TLL6527M reset utility or by pressing the RESET button on the target. Following messages will be displayed on the terminal. By default, U-Boot is setup to automatically start booting the OS after waiting for a few seconds for the user to interrupt the automatic launch by pressing any key. So to stop U-Boot from loading uClinux and provide U-Boot command prompt, just hit any key. (This is assuming TLL6527M is flashed with u-boot and uClinux. TLL6527Ms are pre-flashed with firmware before shipping).
更新NVIDIA显卡的CUDA驱动出错，You appear to be running an X server; please exit X before
热门推荐
Learning by doing
11-09 6万+
（一）错误信息： You appear to be running an X server; please exit X before... 原来，更新驱动需要关闭图形桌面。赶紧查看一下，是不是真的有X ps aux | grep X看到 $ ps aux | grep X root 2242 1.6 0.0 154212 35820 tty7 Ss+
FileZilla Server搭建FTP服务器配置及425错误与TLS警告解决方法详解
09-30
本文详细讲解了FileZilla Server搭建FTP服务器配置以及425 Can't open data,You appear to be behind a NAT router,FTP over TLS is not enabled等相关问题的解决方法
3DMAX 2017-2018 X Exporter 输出.x模型插件 x64位
11-11
Installation: Extract the dle file into the plugins directory of 3ds Max. e.g.: C:\Program Files\Autodesk\3ds Max 2017\plugins If you are encountering a runtime error when start 3ds Max you need to install Visual C++ 2015 Redistributable Packages Usage: 1.Setup your scene and then choose Export or Export Selected from the File menu. 2.Click the 'Save as type' dropdown list where you will find Alin DirectX Exporter. Choose a file path, and then press OK. The configuration dialog will appear, which control how the scene data will be converted from 3ds Max to .x file. 3.New options: X-Rot and Z-Rot can be used for custom coordinate system, for example, switch between Y-up and Z-up is very easy: simply set the X-Rot to 90. 4.3d engine like Irrlicht needs key sequence to take full control of animation speed. You must select Custom in Timeline tab and set to 1, otherwise the animation will be very slow. 5.If there are textures with names in Asian(Chinese, Korean, Japanese) characters, you must set the output format to binary or compressed. 6.Click OK when you finish the configuration.
yarn Retrying… info There appears to be trouble with your network connection.
01-07
Vue CLI v4.2.2 Failed to check for updates :sparkles: Creating project in /home/syw/demo
Linux安装nvidia遇到的问题you appear to be running an x server please exit x before installing
m0_62278731的博客
04-11 1万+
对于其他的 linux 版本，如果桌面系统是基于 gdm 类型，应该把命令中的 lightdm 改为 gdm 即可；非这两种桌面系统类型的，百度一下你的 linux 版本关闭 X 服务的相关命令吧。查看哪些程序在占用nvidia.nvm就可以了，可直接通过 sudo kill -9 [`pid`] 杀死相对应的进程即可。之后就会安装成功，本人安装时遇到了这两个问题，如有其他问题欢迎大家提出。可直接重启服务器解决此问题。kill 杀不死的进程。下载自己对应的版本即可。
ERROR: You appear to be running an X server; please exit X before installing.
weixin_34253126的博客
12-22 1万+
安装NVIDIA-Linux-x86_64-295.53.run时，出现如下错误解决办法：[root@localhost modprobe.d]#同时按键Ctrl、Alt和F2 键Localhostlogin: adminPassword：切换到根权限[admin@localhost~]$ su – root[root@localhost ~]#输入init3进入文本模式...
Error : your appear to running an x server；please exit x before installing .for further details
qq_32415217的博客
02-28 1万+
Error : your appear to running an x server;please exit x before installing .for further details
无法进入桌面you appear to be running an x server please exit x before installing
haohaojian的专栏
04-05 1万+
重新安装英伟达的驱动 按住ctrl+alt+F1 进入控制台  sudo init 3 注意空格 会做掉x  rm /tmp/.X*  上面的命令是删掉X 的锁文件  再次cd 到.run文件所在目录  再次执行 sudo ./.run文件  最后reboot 重启电脑。 若遇到安装完cuda开发包，密码正确却无法登陆进Ubuntu 界面系统，则可以进入控制台手动安装一下G
Error：You appear to be running an X server； please exit X before
CSS360的博客
03-09 1884
很多朋友在安装Nvidia驱动的时候可能都会遇到这样的问题，尤其是使用向日葵远程控制桌面的朋友。因为我们使用向日葵远程控制桌面，需要将Linux的桌面显示改为LightDM 。遇到这样情况，我们需要先将桌面改为gdm3： sudo dpkg-reconfigure gdm3 但修改为gdm3后，终端界面可能会提示fail。请不用担心这个，果断重新启动系统，就可以啦。然后，按照显卡系统安装的流程，进行安装即可。安装完成后，在将显示模式改为 lightdm即可，还可以进行远程桌面控制 ...
vue中appear的用法
08-29
主要介绍了vue中appear的用法,需要的朋友可以参考下
Failed to log into NFC Server
06-25
1.Connect to the ESX host using SSH. For more information, see Connecting to an ESX host using an SSH client (1019852). 2.Take a backup of the /etc/vmware/config file using this command: cp /etc/vmware/config /var/tmp/ 3. Edit the /etc/vmware/config file, so that there is a carriage return after this line: prefvmx.consolidateDeleteNFSLocks = "TRUE" For example, the entries should appear similar to: authd.soapServer = "TRUE" prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa-nfc = "vmware-vpxa:vpxa-nfc" authd.proxy.vpxa-nfcssl = "vmware-vpxa:vpxa-nfcssl"
win3.x 下的wing 玩某些老游戏必备比如孔明传
06-16
wing 你懂的不懂也不会下了。 Microsoft WinG version 1.0 -------------------------- This file describes known bugs, gotchas, and helpful hints for the WinG Version 1.0 final release. ISVs may want to distribute portions of this readme file that describe configuration bugs along with shipping products that use WinG. WinG version 1.0 provides fast DIB-to-screen blts under Windows 3.1, Windows for Workgroups 3.11, Windows 95, and Windows NT version 3.5. WinG will not run on Windows NT version 3.1 or on earlier versions of Windows. WinG requires a 386 or better processor to run. WinG will not run on a 286. If you have problems with WinG, please run the wingbug.exe file in the bin directory of the SDK and send the generated report to wing[email protected]. Updated information on WinG is available on CompuServe in the WINMM forum and on ftp.microsoft.com. Known Bugs And Limitations -------------------------- The following are known problems with or useful tidbits of information about WinG version 1.0. - On Windows 3.1, WinGBitmaps must be 8 bits per pixel and must be created with full 256 entry color tables. - WinGDCs are NOT palette devices. You must change their color tables using WinGSetDIBColorTable, not SelectPalette. - WinGBitBlt and WinGStretchBlt only support bltting from WinGDCs to the screen. - Using BitBlt and StretchBlt to blt from one WinGDC to another can be very slow when a clipping region has been selected into the destination. - WinGBitBlt and WinGStretchBlt may return different values than StretchDIBits for identical blts. - A few GDI APIs do not work correctly with WinGDCs: StretchDIBits will not blt 24bpp and 16bpp DIBs into an 8bpp WinGDC. FloodFill with a NULL brush draws incorrectly FloodFill outside of the bounds of a WinGBitmap can flood the entire image Brushes created with CreatePatternBrush with a WinGBitmap fault when selected into a WinGDC on Win3x - use CreateBitmap(8,8,1,8,0) DrawIcon will crash
11.Jenkins多实例配置
11-05
11.Jenkins多实例配置11.Jenkins多实例配置11.Jenkins多实例配置
python学习导航.txt
05-06
python
node-v8.3.0-linux-s390x.tar.xz
05-06
Node.js，简称Node，是一个开源且跨平台的JavaScript运行时环境，它允许在浏览器外运行JavaScript代码。Node.js于2009年由Ryan Dahl创立，旨在创建高性能的Web服务器和网络应用程序。它基于Google Chrome的V8 JavaScript引擎，可以在Windows、Linux、Unix、Mac OS X等操作系统上运行。 Node.js的特点之一是事件驱动和非阻塞I/O模型，这使得它非常适合处理大量并发连接，从而在构建实时应用程序如在线游戏、聊天应用以及实时通讯服务时表现卓越。此外，Node.js使用了模块化的架构，通过npm（Node package manager，Node包管理器）,社区成员可以共享和复用代码，极大地促进了Node.js生态系统的发展和扩张。 Node.js不仅用于服务器端开发。随着技术的发展，它也被用于构建工具链、开发桌面应用程序、物联网设备等。Node.js能够处理文件系统、操作数据库、处理网络请求等，因此，开发者可以用JavaScript编写全栈应用程序，这一点大大提高了开发效率和便捷性。 在实践中，许多大型企业和组织已经采用Node.js作为其Web应用程序的开发平台，如Netflix、PayPal和Walmart等。它们利用Node.js提高了应用性能，简化了开发流程，并且能更快地响应市场需求。
嵌入式微处理器设计及应用
05-06
摘要：为满足智能家居座椅的交互式运动控制需求，基于AT89S52设计了嵌入式座椅运动控制系统。使用VB.net设计了游戏手柄按键读取软件，并在此基础上设计了座椅运动控制软件，软件可分别在“手柄模式”和“鼠标模式”下与嵌入式座椅运动控制器通信，进而控制座椅进行加速、减速、正转和反转等运动；构建了控制系统实验装置，实验结果表明，“鼠标模式”下，通过鼠标点击控制软件上功能按钮可实现对座椅的准确运动控制；“手柄模式”下，游戏手柄不仅可控制座椅运动，还可同步控制电脑上运行的游戏或远程遥控车，实现浸入感较强的座椅运动娱乐应用。
2024年中国NFC RFID阅读器行业研究报告.docx
05-06
2024年中国NFC RFID阅读器行业研究报告
node-v9.9.0-linux-ppc64le.tar.xz
最新发布
05-06
Node.js，简称Node，是一个开源且跨平台的JavaScript运行时环境，它允许在浏览器外运行JavaScript代码。Node.js于2009年由Ryan Dahl创立，旨在创建高性能的Web服务器和网络应用程序。它基于Google Chrome的V8 JavaScript引擎，可以在Windows、Linux、Unix、Mac OS X等操作系统上运行。 Node.js的特点之一是事件驱动和非阻塞I/O模型，这使得它非常适合处理大量并发连接，从而在构建实时应用程序如在线游戏、聊天应用以及实时通讯服务时表现卓越。此外，Node.js使用了模块化的架构，通过npm（Node package manager，Node包管理器）,社区成员可以共享和复用代码，极大地促进了Node.js生态系统的发展和扩张。 Node.js不仅用于服务器端开发。随着技术的发展，它也被用于构建工具链、开发桌面应用程序、物联网设备等。Node.js能够处理文件系统、操作数据库、处理网络请求等，因此，开发者可以用JavaScript编写全栈应用程序，这一点大大提高了开发效率和便捷性。 在实践中，许多大型企业和组织已经采用Node.js作为其Web应用程序的开发平台，如Netflix、PayPal和Walmart等。它们利用Node.js提高了应用性能，简化了开发流程，并且能更快地响应市场需求。
You appear to be running an X server； please exit X before installing. For further details, please
05-11
This error message is typically encountered when trying to install certain software packages on a Linux distribution while running an X server. The X server is a software component responsible for managing graphical user interfaces in Linux. To resolve this issue, you will need to exit the X server before attempting to install the software package. To do so, you can try switching to a different virtual console by pressing Ctrl+Alt+F1 (or F2, F3, etc.) and logging in as the root user or a user with administrative privileges. From there, you can stop the X server by running the following command: ``` sudo systemctl stop display-manager ``` This command will stop the display manager, which is responsible for starting the X server. Once the display manager is stopped, you should be able to install the software package without encountering the error message. After the installation is complete, you can restart the display manager by running the following command: ``` sudo systemctl start display-manager ``` This will start the display manager and the X server, allowing you to log back in to your graphical desktop environment.

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值