jupyter notebook 关键配置文件
vim .jupyter/jupyter_notebook_config.py
# Configuration file for jupyter-notebook.
c = get_config() #noqa
#------------------------------------------------------------------------------
# Application(SingletonConfigurable) configuration
#------------------------------------------------------------------------------
## This is an application.
## The date format used by logging formatters for %(asctime)s
# Default: '%Y-%m-%d %H:%M:%S'
# c.Application.log_datefmt = '%Y-%m-%d %H:%M:%S'
## The Logging format template
# Default: '[%(name)s]%(highlevel)s %(message)s'
# c.Application.log_format = '[%(name)s]%(highlevel)s %(message)s'
## Set the log level by value or name.
# Choices: any of [0, 10, 20, 30, 40, 50, 'DEBUG', 'INFO', 'WARN', 'ERROR', 'CRITICAL']
# Default: 30
# c.Application.log_level = 30
## Configure additional log handlers.
#
# The default stderr logs handler is configured by the log_level, log_datefmt
# and log_format settings.
#
# This configuration can be used to configure additional handlers (e.g. to
# output the log to a file) or for finer control over the default handlers.
#
# If provided this should be a logging configuration dictionary, for more
# information see:
# https://docs.python.org/3/library/logging.config.html#logging-config-
# dictschema
#
# This dictionary is merged with the base logging configuration which defines
# the following:
#
# * A logging formatter intended for interactive use called
# ``console``.
# * A logging handler that writes to stderr called
# ``console`` which uses the formatter ``console``.
# * A logger with the name of this application set to ``DEBUG``
# level.
#
# This example adds a new handler that writes to a file:
#
# .. code-block:: python
#
# c.Application.logging_config = {
# 'handlers': {
# 'file': {
# 'class': 'logging.FileHandler',
# 'level': 'DEBUG',
# 'filename': '<path/to/file>',
# }
# },
# 'loggers': {
# '<application-name>': {
# 'level': 'DEBUG',
# # NOTE: if you don't list the default "console"
# # handler here then it will be disabled
# 'handlers': ['console', 'file'],
# },
# }
# }
# Default: {}
# c.Application.logging_config = {}
## Instead of starting the Application, dump configuration to stdout
# Default: False
# c.Application.show_config = False
## Instead of starting the Application, dump configuration to stdout (as JSON)
# Default: False
# c.Application.show_config_json = False
#------------------------------------------------------------------------------
# JupyterApp(Application) configuration
#------------------------------------------------------------------------------
## Base class for Jupyter applications
## Answer yes to any prompts.
# Default: False
# c.JupyterApp.answer_yes = False
## Full path of a config file.
# Default: ''
# c.JupyterApp.config_file = ''
## Specify a config file to load.
# Default: ''
# c.JupyterApp.config_file_name = ''
## Generate default config file.
# Default: False
# c.JupyterApp.generate_config = False
## The date format used by logging formatters for %(asctime)s
# See also: Application.log_datefmt
# c.JupyterApp.log_datefmt = '%Y-%m-%d %H:%M:%S'
## The Logging format template
# See also: Application.log_format
# c.JupyterApp.log_format = '[%(name)s]%(highlevel)s %(message)s'
## Set the log level by value or name.
# See also: Application.log_level
# c.JupyterApp.log_level = 30
##
# See also: Application.logging_config
# c.JupyterApp.logging_config = {}
## Instead of starting the Application, dump configuration to stdout
# See also: Application.show_config
# c.JupyterApp.show_config = False
## Instead of starting the Application, dump configuration to stdout (as JSON)
# See also: Application.show_config_json
# c.JupyterApp.show_config_json = False
#------------------------------------------------------------------------------
# NotebookApp(JupyterApp) configuration
#------------------------------------------------------------------------------
## Set the Access-Control-Allow-Credentials: true header
# Default: False
# c.NotebookApp.allow_credentials = False
## Set the Access-Control-Allow-Origin header
#
# Use '*' to allow any origin to access your server.
#
# Takes precedence over allow_origin_pat.
# Default: ''
# c.NotebookApp.allow_origin = ''
## Use a regular expression for the Access-Control-Allow-Origin header
#
# Requests from an origin matching the expression will get replies with:
#
# Access-Control-Allow-Origin: origin
#
# where `origin` is the origin of the request.
#
# Ignored if allow_origin is set.
# Default: ''
# c.NotebookApp.allow_origin_pat = ''
## Allow password to be changed at login for the notebook server.
#
# While logging in with a token, the notebook server UI will give the opportunity to
# the user to enter a new password at the same time that will replace
# the token login mechanism.
#
# This can be set to false to prevent changing password from
# the UI/API.
# Default: True
# c.NotebookApp.allow_password_change = True
## Allow requests where the Host header doesn't point to a local server
#
# By default, requests get a 403 forbidden response if the 'Host' header
# shows that the browser thinks it's on a non-local domain.
# Setting this option to True disables this check.
#
# This protects against 'DNS rebinding' attacks, where a remote web server
# serves you a page and then changes its DNS to send later requests to a
# local IP, bypassing same-origin checks.
#
# Local IP addresses (such as 127.0.0.1 and ::1) are allowed as local,
# along with hostnames configured in local_hostnames.
# Default: False
# c.NotebookApp.allow_remote_access = False
## Whether to allow the user to run the notebook as root.
# Default: False
# c.NotebookApp.allow_root = False
## Answer yes to any prompts.
# See also: JupyterApp.answer_yes
# c.NotebookApp.answer_yes = False
## "
# Require authentication to access prometheus metrics.
# Default: True
# c.NotebookApp.authenticate_prometheus = True
## Reload the webapp when changes are made to any Python src files.
# Default: False
# c.NotebookApp.autoreload = False
## DEPRECATED use base_url
# Default: '/'
# c.NotebookApp.base_project_url = '/'
## The base URL for the notebook server.
#
# Leading and trailing slashes can be omitted,
# and will automatically be added.
# Default: '/'
# c.NotebookApp.base_url = '/'
## Specify what command to use to invoke a web
# browser when opening the notebook. If not specified, the
# default browser will be determined by the `webbrowser`
# standard library module, which allows setting of the
# BROWSER environment variable to override it.
# Default: ''
# c.NotebookApp.browser = ''
## The full path to an SSL/TLS certificate file.
# Default: ''
# c.NotebookApp.certfile = ''
## The full path to a certificate authority certificate for SSL/TLS client
# authentication.
# Default: ''
# c.NotebookApp.client_ca = ''
## Full path of a config file.
# See also: JupyterApp.config_file
# c.NotebookApp.config_file = ''
## Specify a config file to load.
# See also: JupyterApp.config_file_name
# c.NotebookApp.config_file_name = ''
## The config manager class to use
# Default: 'notebook.services.config.manager.ConfigManager'
# c.NotebookApp.config_manager_class = 'notebook.services.config.manager.ConfigManager'
## The notebook manager class to use.
# Default: 'notebook.services.contents.largefilemanager.LargeFileManager'
# c.NotebookApp.contents_manager_class = 'notebook.services.contents.largefilemanager.LargeFileManager'
## Extra keyword arguments to pass to `set_secure_cookie`. See tornado's
# set_secure_cookie docs for details.
# Default: {}
# c.NotebookApp.cookie_options = {}
## The random bytes used to secure cookies.
# By default this is a new random number every time you start the Notebook.
# Set it to a value in a config file to enable logins to persist across server sessions.
#
# Note: Cookie secrets should be kept private, do not share config files with
# cookie_secret stored in plaintext (you can read the value from a file).
# Default: b''
# c.NotebookApp.cookie_secret = b''
## The file where the cookie secret is stored.
# Default: ''
# c.NotebookApp.cookie_secret_file = ''
## Override URL shown to users.
#
# Replace actual URL, including protocol, address, port and base URL,
# with the given value when displaying URL to the users. Do not change
# the actual connection URL. If authentication token is enabled, the
# token is added to the custom URL automatically.
#
# This option is intended to be used when the URL to display to the user
# cannot be determined reliably by the Jupyter notebook server (proxified
# or containerized setups for example).
# Default: ''
# c.NotebookApp.custom_display_url = ''
## The default URL to redirect to from `/`
# Default: '/tree'
# c.NotebookApp.default_url = '/tree'
## Disable cross-site-request-forgery protection
#
# Jupyter notebook 4.3.1 introduces protection from cross-site request forgeries,
# requiring API requests to either:
#
# - originate from pages served by this server (validated with XSRF cookie and token), or
# - authenticate with a token
#
# Some anonymous compute resources still desire the ability to run code,
# completely without authentication.
# These services can disable all authentication and security checks,
# with the full knowledge of what that implies.
# Default: False
# c.NotebookApp.disable_check_xsrf = False
## Whether to enable MathJax for typesetting math/TeX
#
# MathJax is the javascript library Jupyter uses to render math/LaTeX. It is
# very large, so you may want to disable it if you have a slow internet
# connection, or for offline use of the notebook.
#
# When disabled, equations etc. will appear as their untransformed TeX
# source.
# Default: True
# c.NotebookApp.enable_mathjax = True
## extra paths to look for Javascript notebook extensions
# Default: []
# c.NotebookApp.extra_nbextensions_path = []
## handlers that should be loaded at higher priority than the default services
# Default: []
# c.NotebookApp.extra_services = []
## Extra paths to search for serving static files.
#
# This allows adding javascript/css to be available from the notebook server machine,
# or overriding individual files in the IPython
# Default: []
# c.NotebookApp.extra_static_paths = []
## Extra paths to search for serving jinja templates.
#
# Can be used to override templates from notebook.templates.
# Default: []
# c.NotebookApp.extra_template_paths = []
# Default: ''
# c.NotebookApp.file_to_run = ''
## Generate default config file.
# See also: JupyterApp.generate_config
# c.NotebookApp.generate_config = False
## Extra keyword arguments to pass to `get_secure_cookie`. See tornado's
# get_secure_cookie docs for details.
# Default: {}
# c.NotebookApp.get_secure_cookie_kwargs = {}
## Deprecated: Use minified JS file or not, mainly use during dev to avoid JS
# recompilation
# Default: False
# c.NotebookApp.ignore_minified_js = False
## (bytes/sec)
# Maximum rate at which stream output can be sent on iopub before they are
# limited.
# Default: 1000000
# c.NotebookApp.iopub_data_rate_limit = 1000000
## (msgs/sec)
# Maximum rate at which messages can be sent on iopub before they are
# limited.
# Default: 1000
# c.NotebookApp.iopub_msg_rate_limit = 1000
## The IP address the notebook server will listen on.
# Default: 'localhost'
c.NotebookApp.ip = '0.0.0.0'
## Supply extra arguments that will be passed to Jinja environment.
# Default: {}
# c.NotebookApp.jinja_environment_options = {}
## Extra variables to supply to jinja templates when rendering.
# Default: {}
# c.NotebookApp.jinja_template_vars = {}
## The kernel manager class to use.
# Default: 'notebook.services.kernels.kernelmanager.MappingKernelManager'
# c.NotebookApp.kernel_manager_class = 'notebook.services.kernels.kernelmanager.MappingKernelManager'
## The kernel spec manager class to use. Should be a subclass of
# `jupyter_client.kernelspec.KernelSpecManager`.
#
# The Api of KernelSpecManager is provisional and might change without warning
# between this version of Jupyter and the next stable one.
# Default: 'jupyter_client.kernelspec.KernelSpecManager'
# c.NotebookApp.kernel_spec_manager_class = 'jupyter_client.kernelspec.KernelSpecManager'
## The full path to a private key file for usage with SSL/TLS.
# Default: ''
# c.NotebookApp.keyfile = ''
## Hostnames to allow as local when allow_remote_access is False.
#
# Local IP addresses (such as 127.0.0.1 and ::1) are automatically accepted
# as local as well.
# Default: ['localhost']
# c.NotebookApp.local_hostnames = ['localhost']
## The date format used by logging formatters for %(asctime)s
# See also: Application.log_datefmt
# c.NotebookApp.log_datefmt = '%Y-%m-%d %H:%M:%S'
## The Logging format template
# See also: Application.log_format
# c.NotebookApp.log_format = '[%(name)s]%(highlevel)s %(message)s'
## Set to True to enable JSON formatted logs. Run "pip install notebook[json-
# logging]" to install the required dependent packages. Can also be set using
# the environment variable JUPYTER_ENABLE_JSON_LOGGING=true.
# Default: False
# c.NotebookApp.log_json = False
## Set the log level by value or name.
# See also: Application.log_level
# c.NotebookApp.log_level = 30
##
# See also: Application.logging_config
# c.NotebookApp.logging_config = {}
## The login handler class to use.
# Default: 'notebook.auth.login.LoginHandler'
# c.NotebookApp.login_handler_class = 'notebook.auth.login.LoginHandler'
## The logout handler class to use.
# Default: 'notebook.auth.logout.LogoutHandler'
# c.NotebookApp.logout_handler_class = 'notebook.auth.logout.LogoutHandler'
## The MathJax.js configuration file that is to be used.
# Default: 'TeX-AMS-MML_HTMLorMML-full,Safe'
# c.NotebookApp.mathjax_config = 'TeX-AMS-MML_HTMLorMML-full,Safe'
## A custom url for MathJax.js.
# Should be in the form of a case-sensitive url to MathJax,
# for example: /static/components/MathJax/MathJax.js
# Default: ''
# c.NotebookApp.mathjax_url = ''
## Sets the maximum allowed size of the client request body, specified in the
# Content-Length request header field. If the size in a request exceeds the
# configured value, a malformed HTTP message is returned to the client.
#
# Note: max_body_size is applied even in streaming mode.
# Default: 536870912
# c.NotebookApp.max_body_size = 536870912
## Gets or sets the maximum amount of memory, in bytes, that is allocated for use
# by the buffer manager.
# Default: 536870912
# c.NotebookApp.max_buffer_size = 536870912
## Gets or sets a lower bound on the open file handles process resource limit.
# This may need to be increased if you run into an OSError: [Errno 24] Too many
# open files. This is not applicable when running on Windows.
# Default: 0
# c.NotebookApp.min_open_files_limit = 0
## Dict of Python modules to load as notebook server extensions. Entry values can
# be used to enable and disable the loading of the extensions. The extensions
# will be loaded in alphabetical order.
# Default: {}
# c.NotebookApp.nbserver_extensions = {}
## The directory to use for notebooks and kernels.
# Default: ''
# c.NotebookApp.notebook_dir = ''
## Whether to open in a browser after starting.
# The specific browser used is platform dependent and
# determined by the python standard library `webbrowser`
# module, unless it is overridden using the --browser
# (NotebookApp.browser) configuration option.
# Default: True
c.NotebookApp.open_browser = False
## Hashed password to use for web authentication.
#
# To generate, type in a python/IPython shell:
#
# from notebook.auth import passwd; passwd()
#
# The string should be of the form type:salt:hashed-
# password.
# Default: ''
# c.NotebookApp.password = ''
## Forces users to use a password for the Notebook server.
# This is useful in a multi user environment, for instance when
# everybody in the LAN can access each other's machine through ssh.
#
# In such a case, serving the notebook server on localhost is not secure
# since any user can connect to the notebook server via ssh.
# Default: False
# c.NotebookApp.password_required = False
## The port the notebook server will listen on (env: JUPYTER_PORT).
# Default: 8888
# c.NotebookApp.port = 8888
## The number of additional ports to try if the specified port is not available
# (env: JUPYTER_PORT_RETRIES).
# Default: 50
# c.NotebookApp.port_retries = 50
## DISABLED: use %pylab or %matplotlib in the notebook to enable matplotlib.
# Default: 'disabled'
# c.NotebookApp.pylab = 'disabled'
## If True, display a button in the dashboard to quit
# (shutdown the notebook server).
# Default: True
# c.NotebookApp.quit_button = True
## (sec) Time window used to
# check the message and data rate limits.
# Default: 3
# c.NotebookApp.rate_limit_window = 3
## Reraise exceptions encountered loading server extensions?
# Default: False
# c.NotebookApp.reraise_server_extension_failures = False
## DEPRECATED use the nbserver_extensions dict instead
# Default: []
# c.NotebookApp.server_extensions = []
## The session manager class to use.
# Default: 'notebook.services.sessions.sessionmanager.SessionManager'
# c.NotebookApp.session_manager_class = 'notebook.services.sessions.sessionmanager.SessionManager'
## Whether the banner is displayed on the page.
#
# By default, the banner is displayed.
# Default: True
# c.NotebookApp.show_banner = True
## Instead of starting the Application, dump configuration to stdout
# See also: Application.show_config
# c.NotebookApp.show_config = False
## Instead of starting the Application, dump configuration to stdout (as JSON)
# See also: Application.show_config_json
# c.NotebookApp.show_config_json = False
## Shut down the server after N seconds with no kernels or terminals running and
# no activity. This can be used together with culling idle kernels
# (MappingKernelManager.cull_idle_timeout) to shutdown the notebook server when
# it's not in use. This is not precisely timed: it may shut down up to a minute
# later. 0 (the default) disables this automatic shutdown.
# Default: 0
# c.NotebookApp.shutdown_no_activity_timeout = 0
## The UNIX socket the notebook server will listen on.
# Default: ''
# c.NotebookApp.sock = ''
## The permissions mode for UNIX socket creation (default: 0600).
# Default: '0600'
# c.NotebookApp.sock_mode = '0600'
## Supply SSL options for the tornado HTTPServer.
# See the tornado docs for details.
# Default: {}
# c.NotebookApp.ssl_options = {}
## Supply overrides for terminado. Currently only supports "shell_command". On
# Unix, if "shell_command" is not provided, a non-login shell is launched by
# default when the notebook server is connected to a terminal, a login shell
# otherwise.
# Default: {}
# c.NotebookApp.terminado_settings = {}
## Set to False to disable terminals.
#
# This does *not* make the notebook server more secure by itself.
# Anything the user can in a terminal, they can also do in a notebook.
#
# Terminals may also be automatically disabled if the terminado package
# is not available.
# Default: True
# c.NotebookApp.terminals_enabled = True
## Token used for authenticating first-time connections to the server.
#
# The token can be read from the file referenced by JUPYTER_TOKEN_FILE or set directly
# with the JUPYTER_TOKEN environment variable.
#
# When no password is enabled,
# the default is to generate a new, random token.
#
# Setting to an empty string disables authentication altogether, which
# is NOT RECOMMENDED.
# Default: '<generated>'
c.NotebookApp.token = ''
## Supply overrides for the tornado.web.Application that the Jupyter notebook
# uses.
# Default: {}
# c.NotebookApp.tornado_settings = {}
## Whether to trust or not X-Scheme/X-Forwarded-Proto and X-Real-Ip/X-Forwarded-
# For headers sent by the upstream reverse proxy. Necessary if the proxy handles
# SSL
# Default: False
# c.NotebookApp.trust_xheaders = False
## Disable launching browser by redirect file
#
# For versions of notebook > 5.7.2, a security feature measure was added that
# prevented the authentication token used to launch the browser from being visible.
# This feature makes it difficult for other users on a multi-user system from
# running code in your Jupyter session as you.
#
# However, some environments (like Windows Subsystem for Linux (WSL) and Chromebooks),
# launching a browser using a redirect file can lead the browser failing to load.
# This is because of the difference in file structures/paths between the runtime and
# the browser.
#
# Disabling this setting to False will disable this behavior, allowing the browser
# to launch by using a URL and visible token (as before).
# Default: True
# c.NotebookApp.use_redirect_file = True
## DEPRECATED, use tornado_settings
# Default: {}
# c.NotebookApp.webapp_settings = {}
## Specify Where to open the notebook on startup. This is the
# `new` argument passed to the standard library method `webbrowser.open`.
# The behaviour is not guaranteed, but depends on browser support. Valid
# values are:
#
# - 2 opens a new tab,
# - 1 opens a new window,
# - 0 opens in an existing window.
#
# See the `webbrowser.open` documentation for details.
# Default: 2
# c.NotebookApp.webbrowser_open_new = 2
## Set the tornado compression options for websocket connections.
#
# This value will be returned from
# :meth:`WebSocketHandler.get_compression_options`. None (default) will disable
# compression. A dict (even an empty one) will enable compression.
#
# See the tornado docs for WebSocketHandler.get_compression_options for details.
# Default: None
# c.NotebookApp.websocket_compression_options = None
## The base URL for websockets,
# if it differs from the HTTP server (hint: it almost certainly doesn't).
#
# Should be in the form of an HTTP origin: ws[s]://hostname[:port]
# Default: ''
# c.NotebookApp.websocket_url = ''
#------------------------------------------------------------------------------
# ConnectionFileMixin(LoggingConfigurable) configuration
#------------------------------------------------------------------------------
## Mixin for configurable classes that work with connection files
## JSON file in which to store connection info [default: kernel-<pid>.json]
#
# This file will contain the IP, ports, and authentication key needed to connect
# clients to this kernel. By default, this file will be created in the security dir
# of the current profile, but can be specified by absolute path.
# Default: ''
# c.ConnectionFileMixin.connection_file = ''
## set the control (ROUTER) port [default: random]
# Default: 0
# c.ConnectionFileMixin.control_port = 0
## set the heartbeat port [default: random]
# Default: 0
# c.ConnectionFileMixin.hb_port = 0
## set the iopub (PUB) port [default: random]
# Default: 0
# c.ConnectionFileMixin.iopub_port = 0
## Set the kernel's IP address [default localhost].
# If the IP address is something other than localhost, then
# Consoles on other machines will be able to connect
# to the Kernel, so be careful!
# Default: ''
# c.ConnectionFileMixin.ip = ''
## set the shell (ROUTER) port [default: random]
# Default: 0
# c.ConnectionFileMixin.shell_port = 0
## set the stdin (ROUTER) port [default: random]
# Default: 0
# c.ConnectionFileMixin.stdin_port = 0
# Choices: any of ['tcp', 'ipc'] (case-insensitive)
# Default: 'tcp'
# c.ConnectionFileMixin.transport = 'tcp'
#------------------------------------------------------------------------------
# KernelManager(ConnectionFileMixin) configuration
#------------------------------------------------------------------------------
## Manages a single kernel in a subprocess on this host.
#
# This version starts kernels with Popen.
## Should we autorestart the kernel if it dies.
# Default: True
# c.KernelManager.autorestart = True
## JSON file in which to store connection info [default: kernel-<pid>.json]
# See also: ConnectionFileMixin.connection_file
# c.KernelManager.connection_file = ''
## set the control (ROUTER) port [default: random]
# See also: ConnectionFileMixin.control_port
# c.KernelManager.control_port = 0
## set the heartbeat port [default: random]
# See also: ConnectionFileMixin.hb_port
# c.KernelManager.hb_port = 0
## set the iopub (PUB) port [default: random]
# See also: ConnectionFileMixin.iopub_port
# c.KernelManager.iopub_port = 0
## Set the kernel's IP address [default localhost].
# See also: ConnectionFileMixin.ip
# c.KernelManager.ip = ''
## set the shell (ROUTER) port [default: random]
# See also: ConnectionFileMixin.shell_port
# c.KernelManager.shell_port = 0
## Time to wait for a kernel to terminate before killing it, in seconds. When a
# shutdown request is initiated, the kernel will be immediately sent an
# interrupt (SIGINT), followedby a shutdown_request message, after 1/2 of
# `shutdown_wait_time`it will be sent a terminate (SIGTERM) request, and finally
# at the end of `shutdown_wait_time` will be killed (SIGKILL). terminate and
# kill may be equivalent on windows. Note that this value can beoverridden by
# the in-use kernel provisioner since shutdown times mayvary by provisioned
# environment.
# Default: 5.0
# c.KernelManager.shutdown_wait_time = 5.0
## set the stdin (ROUTER) port [default: random]
# See also: ConnectionFileMixin.stdin_port
# c.KernelManager.stdin_port = 0
# See also: ConnectionFileMixin.transport
# c.KernelManager.transport = 'tcp'
#------------------------------------------------------------------------------
# Session(Configurable) configuration
#------------------------------------------------------------------------------
## Object for handling serialization and sending of messages.
#
# The Session object handles building messages and sending them
# with ZMQ sockets or ZMQStream objects. Objects can communicate with each
# other over the network via Session objects, and only need to work with the
# dict-based IPython message spec. The Session will handle
# serialization/deserialization, security, and metadata.
#
# Sessions support configurable serialization via packer/unpacker traits,
# and signing with HMAC digests via the key/keyfile traits.
#
# Parameters
# ----------
#
# debug : bool
# whether to trigger extra debugging statements
# packer/unpacker : str : 'json', 'pickle' or import_string
# importstrings for methods to serialize message parts. If just
# 'json' or 'pickle', predefined JSON and pickle packers will be used.
# Otherwise, the entire importstring must be used.
#
# The functions must accept at least valid JSON input, and output
# *bytes*.
#
# For example, to use msgpack:
# packer = 'msgpack.packb', unpacker='msgpack.unpackb'
# pack/unpack : callables
# You can also set the pack/unpack callables for serialization directly.
# session : bytes
# the ID of this Session object. The default is to generate a new UUID.
# username : unicode
# username added to message headers. The default is to ask the OS.
# key : bytes
# The key used to initialize an HMAC signature. If unset, messages
# will not be signed or checked.
# keyfile : filepath
# The file containing a key. If this is set, `key` will be initialized
# to the contents of the file.
## Threshold (in bytes) beyond which an object's buffer should be extracted to
# avoid pickling.
# Default: 1024
# c.Session.buffer_threshold = 1024
## Whether to check PID to protect against calls after fork.
#
# This check can be disabled if fork-safety is handled elsewhere.
# Default: True
# c.Session.check_pid = True
## Threshold (in bytes) beyond which a buffer should be sent without copying.
# Default: 65536
# c.Session.copy_threshold = 65536
## Debug output in the Session
# Default: False
# c.Session.debug = False
## The maximum number of digests to remember.
#
# The digest history will be culled when it exceeds this value.
# Default: 65536
# c.Session.digest_history_size = 65536
## The maximum number of items for a container to be introspected for custom serialization.
# Containers larger than this are pickled outright.
# Default: 64
# c.Session.item_threshold = 64
## execution key, for signing messages.
# Default: b''
# c.Session.key = b''
## path to file containing execution key.
# Default: ''
# c.Session.keyfile = ''
## Metadata dictionary, which serves as the default top-level metadata dict for
# each message.
# Default: {}
# c.Session.metadata = {}
## The name of the packer for serializing messages.
# Should be one of 'json', 'pickle', or an import name
# for a custom callable serializer.
# Default: 'json'
# c.Session.packer = 'json'
## The UUID identifying this session.
# Default: ''
# c.Session.session = ''
## The digest scheme used to construct the message signatures.
# Must have the form 'hmac-HASH'.
# Default: 'hmac-sha256'
# c.Session.signature_scheme = 'hmac-sha256'
## The name of the unpacker for unserializing messages.
# Only used with custom functions for `packer`.
# Default: 'json'
# c.Session.unpacker = 'json'
## Username for the Session. Default is your system username.
# Default: 'ailab'
# c.Session.username = 'ailab'
#------------------------------------------------------------------------------
# MultiKernelManager(LoggingConfigurable) configuration
#------------------------------------------------------------------------------
## A class for managing multiple kernels.
## The name of the default kernel to start
# Default: 'python3'
# c.MultiKernelManager.default_kernel_name = 'python3'
## The kernel manager class. This is configurable to allow
# subclassing of the KernelManager for customized behavior.
# Default: 'jupyter_client.ioloop.IOLoopKernelManager'
# c.MultiKernelManager.kernel_manager_class = 'jupyter_client.ioloop.IOLoopKernelManager'
## Share a single zmq.Context to talk to all my kernels
# Default: True
# c.MultiKernelManager.shared_context = True
#------------------------------------------------------------------------------
# MappingKernelManager(MultiKernelManager) configuration
#------------------------------------------------------------------------------
## A KernelManager that handles notebook mapping and HTTP error handling
## White list of allowed kernel message types.
# When the list is empty, all message types are allowed.
# Default: []
# c.MappingKernelManager.allowed_message_types = []
## Whether messages from kernels whose frontends have disconnected should be buffered in-memory.
# When True (default), messages are buffered and replayed on reconnect,
# avoiding lost messages due to interrupted connectivity.
# Disable if long-running kernels will produce too much output while
# no frontends are connected.
# Default: True
# c.MappingKernelManager.buffer_offline_messages = True
## Whether to consider culling kernels which are busy.
# Only effective if cull_idle_timeout > 0.
# Default: False
# c.MappingKernelManager.cull_busy = False
## Whether to consider culling kernels which have one or more connections.
# Only effective if cull_idle_timeout > 0.
# Default: False
# c.MappingKernelManager.cull_connected = False
## Timeout (in seconds) after which a kernel is considered idle and ready to be culled.
# Values of 0 or lower disable culling. Very short timeouts may result in kernels being culled
# for users with poor network connections.
# Default: 0
# c.MappingKernelManager.cull_idle_timeout = 0
## The interval (in seconds) on which to check for idle kernels exceeding the
# cull timeout value.
# Default: 300
# c.MappingKernelManager.cull_interval = 300
## The name of the default kernel to start
# See also: MultiKernelManager.default_kernel_name
# c.MappingKernelManager.default_kernel_name = 'python3'
## Timeout for giving up on a kernel (in seconds).
# On starting and restarting kernels, we check whether the
# kernel is running and responsive by sending kernel_info_requests.
# This sets the timeout in seconds for how long the kernel can take
# before being presumed dead.
# This affects the MappingKernelManager (which handles kernel restarts)
# and the ZMQChannelsHandler (which handles the startup).
# Default: 60
# c.MappingKernelManager.kernel_info_timeout = 60
## The kernel manager class. This is configurable to allow
# See also: MultiKernelManager.kernel_manager_class
# c.MappingKernelManager.kernel_manager_class = 'jupyter_client.ioloop.IOLoopKernelManager'
# Default: ''
# c.MappingKernelManager.root_dir = ''
## Share a single zmq.Context to talk to all my kernels
# See also: MultiKernelManager.shared_context
# c.MappingKernelManager.shared_context = True
#------------------------------------------------------------------------------
# KernelSpecManager(LoggingConfigurable) configuration
#------------------------------------------------------------------------------
## List of allowed kernel names.
#
# By default, all installed kernels are allowed.
# Default: set()
# c.KernelSpecManager.allowed_kernelspecs = set()
## If there is no Python kernelspec registered and the IPython
# kernel is available, ensure it is added to the spec list.
# Default: True
# c.KernelSpecManager.ensure_native_kernel = True
## The kernel spec class. This is configurable to allow
# subclassing of the KernelSpecManager for customized behavior.
# Default: 'jupyter_client.kernelspec.KernelSpec'
# c.KernelSpecManager.kernel_spec_class = 'jupyter_client.kernelspec.KernelSpec'
## Deprecated, use `KernelSpecManager.allowed_kernelspecs`
# Default: set()
# c.KernelSpecManager.whitelist = set()
#------------------------------------------------------------------------------
# ContentsManager(LoggingConfigurable) configuration
#------------------------------------------------------------------------------
## Base class for serving files and directories.
#
# This serves any text or binary file,
# as well as directories,
# with special handling for JSON notebook documents.
#
# Most APIs take a path argument,
# which is always an API-style unicode path,
# and always refers to a directory.
#
# - unicode, not url-escaped
# - '/'-separated
# - leading and trailing '/' will be stripped
# - if unspecified, path defaults to '',
# indicating the root path.
## Allow access to hidden files
# Default: False
# c.ContentsManager.allow_hidden = False
# Default: None
# c.ContentsManager.checkpoints = None
# Default: 'notebook.services.contents.checkpoints.Checkpoints'
# c.ContentsManager.checkpoints_class = 'notebook.services.contents.checkpoints.Checkpoints'
# Default: {}
# c.ContentsManager.checkpoints_kwargs = {}
## handler class to use when serving raw file requests.
#
# Default is a fallback that talks to the ContentsManager API,
# which may be inefficient, especially for large files.
#
# Local files-based ContentsManagers can use a StaticFileHandler subclass,
# which will be much more efficient.
#
# Access to these files should be Authenticated.
# Default: 'notebook.files.handlers.FilesHandler'
# c.ContentsManager.files_handler_class = 'notebook.files.handlers.FilesHandler'
## Extra parameters to pass to files_handler_class.
#
# For example, StaticFileHandlers generally expect a `path` argument
# specifying the root directory from which to serve files.
# Default: {}
# c.ContentsManager.files_handler_params = {}
## Glob patterns to hide in file and directory listings.
# Default: ['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*.so', '*.dylib', '*~']
# c.ContentsManager.hide_globs = ['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*.so', '*.dylib', '*~']
## Python callable or importstring thereof
#
# To be called on a contents model prior to save.
#
# This can be used to process the structure,
# such as removing notebook outputs or other side effects that
# should not be saved.
#
# It will be called as (all arguments passed by keyword)::
#
# hook(path=path, model=model, contents_manager=self)
#
# - model: the model to be saved. Includes file contents.
# Modifying this dict will affect the file that is stored.
# - path: the API path of the save destination
# - contents_manager: this ContentsManager instance
# Default: None
# c.ContentsManager.pre_save_hook = None
# Default: '/'
# c.ContentsManager.root_dir = '/'
## The base name used when creating untitled directories.
# Default: 'Untitled Folder'
# c.ContentsManager.untitled_directory = 'Untitled Folder'
## The base name used when creating untitled files.
# Default: 'untitled'
# c.ContentsManager.untitled_file = 'untitled'
## The base name used when creating untitled notebooks.
# Default: 'Untitled'
# c.ContentsManager.untitled_notebook = 'Untitled'
#------------------------------------------------------------------------------
# FileManagerMixin(Configurable) configuration
#------------------------------------------------------------------------------
## Mixin for ContentsAPI classes that interact with the filesystem.
#
# Provides facilities for reading, writing, and copying both notebooks and
# generic files.
#
# Shared by FileContentsManager and FileCheckpoints.
#
# Note ---- Classes using this mixin must provide the following attributes:
#
# root_dir : unicode
# A directory against which API-style paths are to be resolved.
#
# log : logging.Logger
## By default notebooks are saved on disk on a temporary file and then if successfully written, it replaces the old ones.
# This procedure, namely 'atomic_writing', causes some bugs on file system without operation order enforcement (like some networked fs).
# If set to False, the new notebook is written directly on the old one which could fail (eg: full filesystem or quota )
# Default: True
# c.FileManagerMixin.use_atomic_writing = True
#------------------------------------------------------------------------------
# FileContentsManager(FileManagerMixin, ContentsManager) configuration
#------------------------------------------------------------------------------
## Allow access to hidden files
# See also: ContentsManager.allow_hidden
# c.FileContentsManager.allow_hidden = False
# See also: ContentsManager.checkpoints
# c.FileContentsManager.checkpoints = None
# See also: ContentsManager.checkpoints_class
# c.FileContentsManager.checkpoints_class = 'notebook.services.contents.checkpoints.Checkpoints'
# See also: ContentsManager.checkpoints_kwargs
# c.FileContentsManager.checkpoints_kwargs = {}
## If True (default), deleting files will send them to the
# platform's trash/recycle bin, where they can be recovered. If False,
# deleting files really deletes them.
# Default: True
# c.FileContentsManager.delete_to_trash = True
## handler class to use when serving raw file requests.
# See also: ContentsManager.files_handler_class
# c.FileContentsManager.files_handler_class = 'notebook.files.handlers.FilesHandler'
## Extra parameters to pass to files_handler_class.
# See also: ContentsManager.files_handler_params
# c.FileContentsManager.files_handler_params = {}
##
# See also: ContentsManager.hide_globs
# c.FileContentsManager.hide_globs = ['__pycache__', '*.pyc', '*.pyo', '.DS_Store', '*.so', '*.dylib', '*~']
## Python callable or importstring thereof
#
# to be called on the path of a file just saved.
#
# This can be used to process the file on disk,
# such as converting the notebook to a script or HTML via nbconvert.
#
# It will be called as (all arguments passed by keyword)::
#
# hook(os_path=os_path, model=model, contents_manager=instance)
#
# - path: the filesystem path to the file just written
# - model: the model representing the file
# - contents_manager: this ContentsManager instance
# Default: None
# c.FileContentsManager.post_save_hook = None
## Python callable or importstring thereof
# See also: ContentsManager.pre_save_hook
# c.FileContentsManager.pre_save_hook = None
# Default: ''
# c.FileContentsManager.root_dir = ''
## DEPRECATED, use post_save_hook. Will be removed in Notebook 5.0
# Default: False
# c.FileContentsManager.save_script = False
## The base name used when creating untitled directories.
# See also: ContentsManager.untitled_directory
# c.FileContentsManager.untitled_directory = 'Untitled Folder'
## The base name used when creating untitled files.
# See also: ContentsManager.untitled_file
# c.FileContentsManager.untitled_file = 'untitled'
## The base name used when creating untitled notebooks.
# See also: ContentsManager.untitled_notebook
# c.FileContentsManager.untitled_notebook = 'Untitled'
## By default notebooks are saved on disk on a temporary file and then if
# successfully written, it replaces the old ones.
# See also: FileManagerMixin.use_atomic_writing
# c.FileContentsManager.use_atomic_writing = True
#------------------------------------------------------------------------------
# NotebookNotary(LoggingConfigurable) configuration
#------------------------------------------------------------------------------
## A class for computing and verifying notebook signatures.
## The hashing algorithm used to sign notebooks.
# Choices: any of ['blake2s', 'sha384', 'sha3_224', 'sha1', 'sha3_384', 'sha256', 'sha3_512', 'sha3_256', 'blake2b', 'md5', 'sha224', 'sha512']
# Default: 'sha256'
# c.NotebookNotary.algorithm = 'sha256'
## The storage directory for notary secret and database.
# Default: ''
# c.NotebookNotary.data_dir = ''
## The sqlite file in which to store notebook signatures.
# By default, this will be in your Jupyter data directory.
# You can set it to ':memory:' to disable sqlite writing to the filesystem.
# Default: ''
# c.NotebookNotary.db_file = ''
## The secret key with which notebooks are signed.
# Default: b''
# c.NotebookNotary.secret = b''
## The file where the secret key is stored.
# Default: ''
# c.NotebookNotary.secret_file = ''
## A callable returning the storage backend for notebook signatures.
# The default uses an SQLite database.
# Default: traitlets.Undefined
# c.NotebookNotary.store_factory = traitlets.Undefined
#------------------------------------------------------------------------------
# AsyncMultiKernelManager(MultiKernelManager) configuration
#------------------------------------------------------------------------------
## The name of the default kernel to start
# See also: MultiKernelManager.default_kernel_name
# c.AsyncMultiKernelManager.default_kernel_name = 'python3'
## The kernel manager class. This is configurable to allow
# subclassing of the AsyncKernelManager for customized behavior.
# Default: 'jupyter_client.ioloop.AsyncIOLoopKernelManager'
# c.AsyncMultiKernelManager.kernel_manager_class = 'jupyter_client.ioloop.AsyncIOLoopKernelManager'
## Share a single zmq.Context to talk to all my kernels
# See also: MultiKernelManager.shared_context
# c.AsyncMultiKernelManager.shared_context = True
## Whether to make kernels available before the process has started. The
# kernel has a `.ready` future which can be awaited before connecting
# Default: False
# c.AsyncMultiKernelManager.use_pending_kernels = False
#------------------------------------------------------------------------------
# AsyncMappingKernelManager(MappingKernelManager, AsyncMultiKernelManager) configuration
#------------------------------------------------------------------------------
## White list of allowed kernel message types.
# See also: MappingKernelManager.allowed_message_types
# c.AsyncMappingKernelManager.allowed_message_types = []
## Whether messages from kernels whose frontends have disconnected should be
# buffered in-memory.
# See also: MappingKernelManager.buffer_offline_messages
# c.AsyncMappingKernelManager.buffer_offline_messages = True
## Whether to consider culling kernels which are busy.
# See also: MappingKernelManager.cull_busy
# c.AsyncMappingKernelManager.cull_busy = False
## Whether to consider culling kernels which have one or more connections.
# See also: MappingKernelManager.cull_connected
# c.AsyncMappingKernelManager.cull_connected = False
## Timeout (in seconds) after which a kernel is considered idle and ready to be
# culled.
# See also: MappingKernelManager.cull_idle_timeout
# c.AsyncMappingKernelManager.cull_idle_timeout = 0
## The interval (in seconds) on which to check for idle kernels exceeding the
# cull timeout value.
# See also: MappingKernelManager.cull_interval
# c.AsyncMappingKernelManager.cull_interval = 300
## The name of the default kernel to start
# See also: MultiKernelManager.default_kernel_name
# c.AsyncMappingKernelManager.default_kernel_name = 'python3'
## Timeout for giving up on a kernel (in seconds).
# See also: MappingKernelManager.kernel_info_timeout
# c.AsyncMappingKernelManager.kernel_info_timeout = 60
## The kernel manager class. This is configurable to allow
# See also: AsyncMultiKernelManager.kernel_manager_class
# c.AsyncMappingKernelManager.kernel_manager_class = 'jupyter_client.ioloop.AsyncIOLoopKernelManager'
# See also: MappingKernelManager.root_dir
# c.AsyncMappingKernelManager.root_dir = ''
## Share a single zmq.Context to talk to all my kernels
# See also: MultiKernelManager.shared_context
# c.AsyncMappingKernelManager.shared_context = True
## Whether to make kernels available before the process has started. The
# See also: AsyncMultiKernelManager.use_pending_kernels
# c.AsyncMappingKernelManager.use_pending_kernels = False
#------------------------------------------------------------------------------
# GatewayKernelManager(AsyncMappingKernelManager) configuration
#------------------------------------------------------------------------------
## Kernel manager that supports remote kernels hosted by Jupyter Kernel or
# Enterprise Gateway.
## White list of allowed kernel message types.
# See also: MappingKernelManager.allowed_message_types
# c.GatewayKernelManager.allowed_message_types = []
## Whether messages from kernels whose frontends have disconnected should be
# buffered in-memory.
# See also: MappingKernelManager.buffer_offline_messages
# c.GatewayKernelManager.buffer_offline_messages = True
## Whether to consider culling kernels which are busy.
# See also: MappingKernelManager.cull_busy
# c.GatewayKernelManager.cull_busy = False
## Whether to consider culling kernels which have one or more connections.
# See also: MappingKernelManager.cull_connected
# c.GatewayKernelManager.cull_connected = False
## Timeout (in seconds) after which a kernel is considered idle and ready to be
# culled.
# See also: MappingKernelManager.cull_idle_timeout
# c.GatewayKernelManager.cull_idle_timeout = 0
## The interval (in seconds) on which to check for idle kernels exceeding the
# cull timeout value.
# See also: MappingKernelManager.cull_interval
# c.GatewayKernelManager.cull_interval = 300
## The name of the default kernel to start
# See also: MultiKernelManager.default_kernel_name
# c.GatewayKernelManager.default_kernel_name = 'python3'
## Timeout for giving up on a kernel (in seconds).
# See also: MappingKernelManager.kernel_info_timeout
# c.GatewayKernelManager.kernel_info_timeout = 60
## The kernel manager class. This is configurable to allow
# See also: AsyncMultiKernelManager.kernel_manager_class
# c.GatewayKernelManager.kernel_manager_class = 'jupyter_client.ioloop.AsyncIOLoopKernelManager'
# See also: MappingKernelManager.root_dir
# c.GatewayKernelManager.root_dir = ''
## Share a single zmq.Context to talk to all my kernels
# See also: MultiKernelManager.shared_context
# c.GatewayKernelManager.shared_context = True
## Whether to make kernels available before the process has started. The
# See also: AsyncMultiKernelManager.use_pending_kernels
# c.GatewayKernelManager.use_pending_kernels = False
#------------------------------------------------------------------------------
# GatewayKernelSpecManager(KernelSpecManager) configuration
#------------------------------------------------------------------------------
## List of allowed kernel names.
# See also: KernelSpecManager.allowed_kernelspecs
# c.GatewayKernelSpecManager.allowed_kernelspecs = set()
## If there is no Python kernelspec registered and the IPython
# See also: KernelSpecManager.ensure_native_kernel
# c.GatewayKernelSpecManager.ensure_native_kernel = True
## The kernel spec class. This is configurable to allow
# See also: KernelSpecManager.kernel_spec_class
# c.GatewayKernelSpecManager.kernel_spec_class = 'jupyter_client.kernelspec.KernelSpec'
## Deprecated, use `KernelSpecManager.allowed_kernelspecs`
# See also: KernelSpecManager.whitelist
# c.GatewayKernelSpecManager.whitelist = set()
#------------------------------------------------------------------------------
# GatewayClient(SingletonConfigurable) configuration
#------------------------------------------------------------------------------
## This class manages the configuration. It's its own singleton class so that we
# can share these values across all objects. It also contains some helper methods
# to build request arguments out of the various config options.
## The authorization token used in the HTTP headers. (JUPYTER_GATEWAY_AUTH_TOKEN
# env var)
# Default: None
# c.GatewayClient.auth_token = None
## The filename of CA certificates or None to use defaults.
# (JUPYTER_GATEWAY_CA_CERTS env var)
# Default: None
# c.GatewayClient.ca_certs = None
## The filename for client SSL certificate, if any. (JUPYTER_GATEWAY_CLIENT_CERT
# env var)
# Default: None
# c.GatewayClient.client_cert = None
## The filename for client SSL key, if any. (JUPYTER_GATEWAY_CLIENT_KEY env var)
# Default: None
# c.GatewayClient.client_key = None
## The time allowed for HTTP connection establishment with the Gateway server.
# (JUPYTER_GATEWAY_CONNECT_TIMEOUT env var)
# Default: 40.0
# c.GatewayClient.connect_timeout = 40.0
## A comma-separated list of environment variable names that will be included, along with
# their values, in the kernel startup request. The corresponding `env_whitelist` configuration
# value must also be set on the Gateway server - since that configuration value indicates which
# environmental values to make available to the kernel. (JUPYTER_GATEWAY_ENV_WHITELIST env var)
# Default: ''
# c.GatewayClient.env_whitelist = ''
## The time allowed for HTTP reconnection with the Gateway server for the first time.
# Next will be JUPYTER_GATEWAY_RETRY_INTERVAL multiplied by two in factor of numbers of retries
# but less than JUPYTER_GATEWAY_RETRY_INTERVAL_MAX.
# (JUPYTER_GATEWAY_RETRY_INTERVAL env var)
# Default: 1.0
# c.GatewayClient.gateway_retry_interval = 1.0
## The maximum time allowed for HTTP reconnection retry with the Gateway server.
# (JUPYTER_GATEWAY_RETRY_INTERVAL_MAX env var)
# Default: 30.0
# c.GatewayClient.gateway_retry_interval_max = 30.0
## The maximum retries allowed for HTTP reconnection with the Gateway server.
# (JUPYTER_GATEWAY_RETRY_MAX env var)
# Default: 5
# c.GatewayClient.gateway_retry_max = 5
## Additional HTTP headers to pass on the request. This value will be converted to a dict.
# (JUPYTER_GATEWAY_HEADERS env var)
# Default: '{}'
# c.GatewayClient.headers = '{}'
## The password for HTTP authentication. (JUPYTER_GATEWAY_HTTP_PWD env var)
# Default: None
# c.GatewayClient.http_pwd = None
## The username for HTTP authentication. (JUPYTER_GATEWAY_HTTP_USER env var)
# Default: None
# c.GatewayClient.http_user = None
## The gateway API endpoint for accessing kernel resources
# (JUPYTER_GATEWAY_KERNELS_ENDPOINT env var)
# Default: '/api/kernels'
# c.GatewayClient.kernels_endpoint = '/api/kernels'
## The gateway API endpoint for accessing kernelspecs
# (JUPYTER_GATEWAY_KERNELSPECS_ENDPOINT env var)
# Default: '/api/kernelspecs'
# c.GatewayClient.kernelspecs_endpoint = '/api/kernelspecs'
## The gateway endpoint for accessing kernelspecs resources
# (JUPYTER_GATEWAY_KERNELSPECS_RESOURCE_ENDPOINT env var)
# Default: '/kernelspecs'
# c.GatewayClient.kernelspecs_resource_endpoint = '/kernelspecs'
## The time allowed for HTTP request completion. (JUPYTER_GATEWAY_REQUEST_TIMEOUT
# env var)
# Default: 40.0
# c.GatewayClient.request_timeout = 40.0
## The url of the Kernel or Enterprise Gateway server where
# kernel specifications are defined and kernel management takes place.
# If defined, this Notebook server acts as a proxy for all kernel
# management and kernel specification retrieval. (JUPYTER_GATEWAY_URL env var)
# Default: None
# c.GatewayClient.url = None
## For HTTPS requests, determines if server's certificate should be validated or not.
# (JUPYTER_GATEWAY_VALIDATE_CERT env var)
# Default: True
# c.GatewayClient.validate_cert = True
## The websocket url of the Kernel or Enterprise Gateway server. If not provided, this value
# will correspond to the value of the Gateway url with 'ws' in place of 'http'. (JUPYTER_GATEWAY_WS_URL env var)
# Default: None
# c.GatewayClient.ws_url = None
#------------------------------------------------------------------------------
# TerminalManager(LoggingConfigurable) configuration
#------------------------------------------------------------------------------
##
## Timeout (in seconds) in which a terminal has been inactive and ready to be culled.
# Values of 0 or lower disable culling.
# Default: 0
# c.TerminalManager.cull_inactive_timeout = 0
## The interval (in seconds) on which to check for terminals exceeding the
# inactive timeout value.
# Default: 300
# c.TerminalManager.cull_interval = 300
3928
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
