如何在 kernel 和 hal 层读取同一个标志

很多时候我们需要从 HAL 层（Hardware Abstract Layer）传一个标志给 kernel 层。一般这种传递是不能直接通过定义全局变量来实现的。

此时可以通过读写文件来实现该标志。

譬如我们有这样一个需求，在录像过程中去掉持续对焦功能，而录像预览时开启持续对焦功能。

在 HAL 层中有开始录像和停止录像的接口。

/trunk/ALPS.JB3.TDD.MP.V2_TD_xxx/mediatek/platform/mt6572/hardware/camera/hal/client/CamClient/Record/RecordClient.cpp 文件中

在 /sys/devices/platform/lens_actuator/ 目录下创建一个 VideoRec_Flag 这样的文件，在开始录像时将该文件中写入一个字节的值为1，而在停止录像时将该文件中写入一个字节的值为0。

bool
RecordClient::
startRecording()
{
    bool ret = false; 
    //
    MY_LOGD("+");
    //
    Mutex::Autolock _l(mModuleMtx);
    //
#if 1	
	int flag[1]= {1};

	FILE *fd = NULL;
	fd = fopen("/sys/devices/platform/lens_actuator/VideoRec_Flag","w");

	if(fd == NULL)
	 MY_LOGD("BBN_TestMode open failed");
	else{
	 MY_LOGD("BBN_TestMode open ok");
	 fwrite(&flag,1,1,fd); 
	 fclose(fd);
	}						
#endif  

    if(isEnabledState())
    {
        MY_LOGE("Recording has been started");
        goto lbExit;
    }
    //
    MY_LOGD("+ current mIsRecStarted=%d", mIsRecStarted);
    ::android_atomic_write(1, &mIsRecStarted);
    //
    mpParamsMgr->getVideoSize(&mi4RecWidth, &mi4RecHeight);
    MY_LOGD("+ record: WxH=%dx%d, format(%s)", mi4RecWidth, mi4RecHeight, MtkCameraParameters::PIXEL_FORMAT_YUV420I);//CameraParameters::PIXEL_FORMAT_YUV420P);
    //
    mTimeStart = systemTime();
    mTimeEnd = mTimeStart;
    mFrameCount = 0;
    mLastTimeStamp = 0;
    //
    ret = onStateChanged();
    //
lbExit:
    //
    MY_LOGD("-");
    //
    return  ret;
}


/******************************************************************************
 *
 ******************************************************************************/
bool
RecordClient::
stopRecording()
{
    bool ret = false;
    status_t status = NO_ERROR;
    //
    MY_LOGD("+");
    //
#if 1	
	int flag[1]= {0};

	FILE *fd = NULL;
	fd = fopen("/sys/devices/platform/lens_actuator/VideoRec_Flag","w");

	if(fd == NULL)
	 MY_LOGD("BBN_TestMode open failed");
	else{
	 MY_LOGD("BBN_TestMode open ok");
	 fwrite(&flag,1,1,fd); 
	 fclose(fd);
	}						
#endif

    Mutex::Autolock _l(mModuleMtx);
    //
    if(!isEnabledState())
    {
        MY_LOGE("Recording has been stopped");
        goto lbExit;
    }
    //
    MY_LOGD("getThreadId(%d), getStrongCount(%d), this(%p)", getThreadId(), getStrongCount(), this);
    //
    MY_LOGD("+ current mIsRecStarted=%d", mIsRecStarted);
    ::android_atomic_write(0, &mIsRecStarted);
    //
    ret = onStateChanged();
    //
    mpImgBufQueue->pauseProcessor();
    //
lbExit:
    //
    MY_LOGD("-");
    //
    return  ret;
}

在/trunk/ALPS.JB3.TDD.MP.V2_TD_xxx/mediatek/custom/common/kernel/imgsensor/ov5645_mipi_yuv/ov5645mipiyuv_Sensor.c 文件中

在 OV5645_FOCUS_OVT_AFC_Constant_Focus() 函数中读取之前VideoRec_Flag那个文件中的值，若为1，则进行持续对焦，否则，放弃持续对焦。在驱动文件中是通过写寄存器来实现的。

static void OV5645_FOCUS_OVT_AFC_Constant_Focus(void)
{
	printk("FM50AF_VideoRec_Flag=%d \n",FM50AF_VideoRec_Flag);

   if(FM50AF_VideoRec_Flag)
   {
	   OV5645MIPI_write_cmos_sensor(0x3023,0x01);
	   OV5645MIPI_write_cmos_sensor(0x3022,0x06);           
   }
   else{          
		OV5645MIPI_write_cmos_sensor(0x3023,0x01);
		OV5645MIPI_write_cmos_sensor(0x3022,0x80);
		mDELAY(10);
		OV5645MIPI_write_cmos_sensor(0x3024,0x00);
		OV5645MIPI_write_cmos_sensor(0x3023,0x01);
		OV5645MIPI_write_cmos_sensor(0x3022,0x04);
	}
}  

具体的读取方式如下：

int FM50AF_VideoRec_Flag;

EXPORT_SYMBOL(FM50AF_VideoRec_Flag);

static ssize_t show_VideoRec_Flag(struct device *dev,struct device_attribute *attr, char *buf)
{
//	xlog_printk(ANDROID_LOG_DEBUG, "show_VideoRec_Flag test", "[Battery] show_BN_TestMode : %x\n", g_BN_TestMode);

	printk("show_VideoRec_Flag FM50AF_VideoRec_Flag=%d \n",FM50AF_VideoRec_Flag);
	return sprintf(buf, "%u\n", FM50AF_VideoRec_Flag);

	
}
static ssize_t store_VideoRec_Flag(struct device *dev,struct device_attribute *attr, const char *buf, size_t size)
{
	char *pvalue = NULL;
	unsigned int reg_BN_TestMode = 0;
	printk( "store_VideoRec_Flag \n");
	if(buf != NULL && size != 0)
	{
		printk("store_VideoRec_Flag test111", "[Battery] buf is =%s , size is =%d \n",buf,size);
		printk("store_VideoRec_Flag buf= %d ,size=%d \n", *buf,size);
	//	reg_BN_TestMode = simple_strtoul(buf,&pvalue,10);
		FM50AF_VideoRec_Flag=*buf;
	}		
//	return size;
return FM50AF_VideoRec_Flag;
}
static DEVICE_ATTR(VideoRec_Flag, 0777, show_VideoRec_Flag, store_VideoRec_Flag);

这其中涉及到一些驱动文件中读写文件的格式的写法需要注意下。

至此，就可以实现该需求了。