LCD驱动移植

LCD驱动移植

做这个驱动移植花了我一个晚上和一个早上，太他吗蛋痛了，但做出来后就很高兴啦！！！学习本身就是烦恼与快乐并存的过程。。。。。。

好了，不多说了，下面说说我的移植过程：

我的开发板是Mini2440的，LCD是宽屏的，上面标注W35

（1）gedit arch/arm/mach-s3c2440/mach-smdk2440.c，先删除之前的 LCD  设备平台代码，如 
下： 
/* LCD driver info */

static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {

        .lcdcon5      = S3C2410_LCDCON5_FRM565 |

         S3C2410_LCDCON5_INVVLINE | 
                           S3C2410_LCDCON5_INVVFRAME |

                            S3C2410_LCDCON5_PWREN | 
                                   S3C2410_LCDCON5_HWSWP,

           .type               = S3C2410_LCDCON1_TFT,

           .width              = 240, 
           .height             = 320,

           .pixclock          = 166667, /* HCLK 60 MHz, divisor 10 */ 
           .xres               = 240, 
           .yres               = 320, 
           .bpp                 = 16, 
           .left_margin       = 20, 
           .right_margin      = 8, 
           .hsync_len          = 4, 
           .upper_margin       = 8, 
           .lower_margin       = 7, 
           .vsync_len          = 4, 
}; 
static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { 
           .displays          = &smdk2440_lcd_cfg, 
           .num_displays       = 1, 
           .default_display = 0,

#if 0 
           /* currently setup by downloader */ 
           .gpccon              = 0xaa940659, 
           .gpccon_mask         = 0xffffffff, 
           .gpcup               = 0x0000ffff, 
           .gpcup_mask          = 0xffffffff, 
           .gpdcon              = 0xaa84aaa0, 
           .gpdcon_mask         = 0xffffffff, 
           .gpdup               = 0x0000faff, 
           .gpdup_mask          = 0xffffffff, 
#endif

           .lpcsel            = ((0xCE6) & ~7) | 1<<4,

    再把囯嵌移植好的代码加入，如下： 
/* LCD driver info */

//W 3.5”LCD 的配置和参数设置 
#if defined(CONFIG_FB_S3C2410_T240320)  //注：下面的宏定义的参数十分重要，一定要根据你的屏类型设置，否则会出现显示不满屏等许多现象。

#define LCD_WIDTH 320
#define LCD_HEIGHT 240
#define LCD_PIXCLOCK 170000

#define LCD_RIGHT_MARGIN 0x44
#define LCD_LEFT_MARGIN 0x04 
#define LCD_HSYNC_LEN 0x01

#define LCD_UPPER_MARGIN 10
#define LCD_LOWER_MARGIN 4
#define LCD_VSYNC_LEN 1

#endif

 

#if defined (LCD_WIDTH)

#endif

static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {

#if !defined (LCD_CON5) 
           .lcdcon5            = S3C2410_LCDCON5_FRM565 | 
                                   S3C2410_LCDCON5_INVVLINE | 
                                   S3C2410_LCDCON5_INVVFRAME | 
                                   S3C2410_LCDCON5_PWREN | 
                                   S3C2410_LCDCON5_HWSWP, 
#else 
           .lcdcon5            = LCD_CON5, 
#endif

           .type               = S3C2410_LCDCON1_TFT,

           .width              = LCD_WIDTH, 
           .height             = LCD_HEIGHT,

           .pixclock          = LCD_PIXCLOCK, 
           .xres               = LCD_WIDTH, 
           .yres               = LCD_HEIGHT, 
           .bpp                 = 16, 
           .left_margin       = LCD_LEFT_MARGIN + 1, 
           .right_margin      = LCD_RIGHT_MARGIN + 1, 
           .hsync_len          = LCD_HSYNC_LEN + 1, 
           .upper_margin       = LCD_UPPER_MARGIN + 1, 
           .lower_margin       = LCD_LOWER_MARGIN + 1, 
           .vsync_len          = LCD_VSYNC_LEN + 1, 
};

static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = { 
           .displays          = &smdk2440_lcd_cfg, 
           .num_displays       = 1, 
           .default_display = 0, 

            default_display = 0,

           .gpccon =           0xaa955699, 
           .gpccon_mask =      0xffc003cc, 
           .gpcup =            0x0000ffff, 

          

           .gpcup_mask =        0xffffffff,

           .gpdcon =            0xaa95aaa1, 
           .gpdcon_mask =       0xffc0fff0, 
           .gpdup =             0x0000faff, 
           .gpdup_mask =        0xffffffff,

           .lpcsel            = 0xf82, 
};

        (2)   然后打开drivers/video/Kconfig，在大概 1935 行加入以下配置信息： 
config FB_S3C2410_DEBUG 
      bool "S3C2410 lcd debug messages" 
      depends on FB_S3C2410 
      help 
        Turn on debugging messages. Note that you can set/unset at run time 
        through sysfs

choice 
      prompt "LCD select" 
      depends on FB_S3C2410 
      help 
          S3C24x0 LCD size select

config FB_S3C2410_T240320 
      boolean "3.5 inch 240X320 Toppoly LCD" 
      depends on FB_S3C2410 
      help 
        3.5 inch 240X320 Toppoly LCD

endchoice

(3)配置使支持LCD

到你的内核源代码顶层目录 make menuconfig

Device Drivers ---> 
  Graphics support ---> 
    <*> Support for frame buffer devices ---> 
      LCD select (3.5 inch 240X320 Toppoly LCD) --->

 

如图选上

再次提醒大家一定要注意屏的参数设置！！！

配置完保存退出，再编译内核。