mini2440 test之蜂鸣器

 

2蜂鸣器（BEEP）
void Buzzer_Freq_Set( U32 freq )
{
    rGPBCON &= ~3;                //set GPB0 as tout0, pwm output
    rGPBCON |= 2;
        
    rTCFG0 &= ~0xff;
    rTCFG0 |= 15;                 //prescaler = 15+1
    rTCFG1 &= ~0xf;
    rTCFG1 |= 2;             //mux = 1/8
    rTCNTB0 = (PCLK>>7)/freq;
    rTCMPB0 = rTCNTB0>>1;  // 50%
    rTCON &= ~0x1f;
    rTCON |= 0xb;                //disable deadzone, auto-reload, inv-off, update TCNTB0&TCMPB0, start timer 0
    rTCON &= ~2;                //clear manual update bit
}

void Buzzer_Stop( void )
{
    rGPBCON &= ~3;                //set GPB0 as output
    rGPBCON |= 1;
    rGPBDAT &= ~1;
}

//***************************[ BOARD BEEP ]*******************************
void Beep(U32 freq, U32 ms)
{
    Buzzer_Freq_Set( freq ) ;
    Delay( ms ) ;
    Buzzer_Stop() ;
}

/****************************************************************************
【功能说明】蜂鸣器PWM测试
***********************************