自定义博客皮肤VIP专享

*博客头图:

格式为PNG、JPG,宽度*高度大于1920*100像素,不超过2MB,主视觉建议放在右侧,请参照线上博客头图

请上传大于1920*100像素的图片!

博客底图:

图片格式为PNG、JPG,不超过1MB,可上下左右平铺至整个背景

栏目图:

图片格式为PNG、JPG,图片宽度*高度为300*38像素,不超过0.5MB

主标题颜色:

RGB颜色,例如:#AFAFAF

Hover:

RGB颜色,例如:#AFAFAF

副标题颜色:

RGB颜色,例如:#AFAFAF

自定义博客皮肤

-+
  • 博客(4)
  • 资源 (1)
  • 收藏
  • 关注

转载 Embedded Linux Boot- Code Walkthrough

Embedded Linux Boot- Code Walkthrough<br /> July 31st, 2010 by admin Leave a reply »<br />By K.V.Mohan Reddy & Raghu Bharadwaj<br />This will be a series of articles Documenting Embedded Linux Boot sequence. This is part one.<br />

2010-09-30 14:51:00 639

转载 ARM Linux Boot Sequence, arm linux启动顺序

ARM Linux Boot Sequence<br />The following traces the Linux boot sequence for ARM-based systems in the 2.6.18 kernel. It looks at just the earliest stages of the boot process, until the generic non-processor-specific start_kernel function is called. The li

2010-09-29 23:13:00 623

原创 s3c2440开发日记,u-boot启动过程,Nand Flash启动分析irq_handler, 中断响应过程,

3.u-boot启动过程,2010-08-15     (1)0x0开始的地方为 "cpu/arm920t/start.S" 文件,启动进入 reset,此段代码位于前4K里自动 被加载到内部的4K内存里面,在reset里把u-boot从Nand Flash复制到64M的SDRAM里面。     (2)复制完后跳到lib_arm/board.c的start_armboot函数,在这里初始化内存和网络连接,中断后 进入一个 for(;;) {}的无限循环,在此循环里面不断执行位于 co

2010-08-15 00:52:00 1618

原创 fasmarm来编译并运行gba实例

<br />需要下载安装fasmarm(编译器)与VisualBoyAdvance(gba模拟器), bimbo1_3(将图片转为bin文件的程序)<br /> <br />下载fasmarm:http://arm.flatassembler.net<br />ubuntu安装VisualBoyAdvance:sudo apt-get install VisualBoyAdvance<br />bimbo1:http://gbadev.org/tools.php?showinfo=167<br /> <br

2010-07-13 16:54:00 772

building-custom-php-extensions (编写自定义的PHP扩展模块, PHP扩展开发, PHP模块开发)

自定义自己的PHP模块,用C语言开发自己的PHP函数,当我们想在PHP使用C语言强大的函数库的时候,我们可以通过编写自己的PHP函数过调用想要使用的其它C语言函数,使你的PHP程序更强大高效,要下的赶块...

2010-02-10

空空如也

TA创建的收藏夹 TA关注的收藏夹

TA关注的人

提示
确定要删除当前文章?
取消 删除