【开源获奖案例】智能猫粮控制系统

于 2023-09-22 08:44:15 发布
阅读量79 收藏
点赞数
文章标签： 开源 猫粮控制系统 智能 迪文屏 串口屏

                                                                                                                   ——来自迪文开发者论坛

          本期为大家推送迪文开发者论坛的获奖开源案例：智能猫粮控制系统。工程师使用迪文智能屏实现了监测猫粮的温度、湿度、余量，保存猫咪吃粮记录等功能，并别出心裁的设计了一套水墨画风格UI，以及手指触摸时的水墨点击效果，增强触摸的视觉反馈。

  一、演示视频

【野火】瑞萨RA MCU创意氛围赛 猫粮记

       完整开发资料含迪文屏DGUS工程资料与代码，可前往迪文开发者论坛获取。

二、方案简介

1、UI图片素材

      迪文智能屏是基于图片完成UI开发，需根据屏幕显示内容提前准备好图片、音频等素材。

2、界面开发

       DGUS软件是通过图层叠加来还原UI效果，将准备好的素材在DGUS软件中组合成完整的画面，并设置好显示、触摸功能。

3、实现点击特效和音效

（1）检测触摸位置代码并播放音频：

void TouchDetect()

{

    u16 Va[3] = 0;

    u8 i = 0;

    for(i = 0;i < 3;i++)

    {

        Va[i] = Read_Dgus(0x0016 + i);

        if(Va[0] == 0x5A01)

        {

        }

        else

        {

            break;

        }

    }

    if(i != 0)  //第一次点击进入

    {

        u16 play[2] = {0x0001, 0x4000};

        touchAnimationFlag = 1;

        touchAnimationCnt = 0;

        touchPosX = Va[1];

        touchPosY = Va[2];

        write_dgus_vp(0x00A0, play, 2);

    }

}

（2）触摸特效显示的代码如下：

void TouchStart()

{

    if(touchAnimationFlag == 1)

    {

        if(touchAnimationCnt == 0)

        {

            Write_Dgus(0x5011, touchPosX - 100);

            Write_Dgus(0x5012, touchPosY - 100);

        }

        Write_Dgus(0x5000, touchAnimationCnt);

        touchAnimationCnt++;

        if(touchAnimationCnt == 6)

        {

            touchAnimationFlag = 0;

            Write_Dgus(0x5011, 1024);

            Write_Dgus(0x5012, 600);

        }

    }

}

4、实现猫粮自动出粮

接下来是通过屏幕设定对应的参数，然后数据通过ESP32传输到猫粮控制器，实现猫粮的自动出粮功能，具体代码如下所示：

//获取按键状态

void get_key_status()

{

    int i = 0;

    //u16 Va=Read_Dgus(addr);

    u16  Va=Read_Dgus(0x1000);

    if(Va != 0x0000)

    {        

        //状态页   

        if(Va == 0x0103)    //放置g数量

        {

            u16 switchpage[2] = {0x5A01, 19};

            setNum = placeGramNum;

            backPage = 1;   //返回状态页

            Write_Dgus(0x4000 + 0, setNum % 10);

            Write_Dgus(0x4000 + 2, setNum / 10 % 10);

            Write_Dgus(0x4000 + 4, setNum / 100 % 10);

            Write_Dgus(0x4000 + 6, setNum / 1000 % 10);

            write_dgus_vp(0x0084, switchpage, 2);

        }

        else if(Va == 0x0102)

        {

            OneSendData3(placeGramNum); //放置一次粮

        }

        else if(Va == 0x0101)   //设置页面

        {

            u16 switchpage[2] = {0x5A01, 3};

            for(i = 0;i < 6;i++)

            {  

                if(i == 0)

                {

                    Write_Dgus(0x3070 + i * 0x10 + 0, currentTime[i] % 10);

                    Write_Dgus(0x3070 + i * 0x10 + 2, currentTime[i] / 10 % 10);

                    Write_Dgus(0x3070 + i * 0x10 + 4, currentTime[i] / 100 % 10);

                    Write_Dgus(0x3070 + i * 0x10 + 6, currentTime[i] / 1000 % 10);

                }

                else

                {

                    Write_Dgus(0x3070 + i * 0x10 + 0, currentTime[i] % 10);

                    Write_Dgus(0x3070 + i * 0x10 + 2, currentTime[i] / 10 % 10);

                }

            }

            write_dgus_vp(0x0084, switchpage, 2);    //进入设置页

        }

        else if(Va == 0x0100)   //记录页面

        {

            u16 switchpage[2] = {0x5A01, 2};

            for(i = 0;i < 6;i++)

            {  

                if(i == 0)

                {

                    Write_Dgus(0x2000 + i * 0x10 + 0, eatFeedList[0][i] % 10);

                    Write_Dgus(0x2000 + i * 0x10 + 2, eatFeedList[0][i] / 10 % 10);

                    Write_Dgus(0x2000 + i * 0x10 + 4, eatFeedList[0][i] / 100 % 10);

                    Write_Dgus(0x2000 + i * 0x10 + 6, eatFeedList[0][i] / 1000 % 10);

                }

            else

            {

                Write_Dgus(0x2000 + i * 0x10 + 0, eatFeedList[0][i] % 10);

                Write_Dgus(0x2000 + i * 0x10 + 2, eatFeedList[0][i] / 10 % 10);

            }

        }

        write_dgus_vp(0x0084, switchpage, 2);    //进入记录页

    }

    //记录页

    else if(Va == 0x0201)   //记录页面上一个

    {

        if(lookEatCnt > 0)

        {

            lookEatCnt--;

            for(i = 0;i < 6;i++)

            {  

                if(i == 0)

                {

                    Write_Dgus(0x2000 + i * 0x10 + 0, eatFeedList[lookEatCnt][i] % 10);

                Write_Dgus(0x2000 + i * 0x10 + 2, eatFeedList[lookEatCnt][i] / 10 % 10);

                  Write_Dgus(0x2000 + i * 0x10 + 4, eatFeedList[lookEatCnt][i] / 100 % 10);

                   Write_Dgus(0x2000 + i * 0x10 + 6, eatFeedList[lookEatCnt][i] / 1000 % 10);

                }

                else

                {

                    Write_Dgus(0x2000 + i * 0x10 + 0, eatFeedList[lookEatCnt][i] % 10);

                Write_Dgus(0x2000 + i * 0x10 + 2, eatFeedList[lookEatCnt][i] / 10 % 10);

                }

            }

        }

    }

    else if(Va == 0x0202)   //记录页面下一个

    {

        if(lookEatCnt < eatCnt - 1)

        {

            lookEatCnt++;

            for(i = 0;i < 6;i++)

                {  

                    if(i == 0)

                    {

                    Write_Dgus(0x2000 + i * 0x10 + 0, eatFeedList[lookEatCnt][i] % 10);

                Write_Dgus(0x2000 + i * 0x10 + 2, eatFeedList[lookEatCnt][i] / 10 % 10);

                    Write_Dgus(0x2000 + i * 0x10 + 4, eatFeedList[lookEatCnt][i] / 100 % 10);

                    Write_Dgus(0x2000 + i * 0x10 + 6, eatFeedList[lookEatCnt][i] / 1000 % 10);

                    }

                    else

                    {

                      Write_Dgus(0x2000 + i * 0x10 + 0, eatFeedList[lookEatCnt][i] % 10);

                     Write_Dgus(0x2000 + i * 0x10 + 2, eatFeedList[lookEatCnt][i] / 10 % 10);

                    }

                }

            }

        }

       //设置页

        else if(Va == 0x0302)

        {

            if(timeMode == 1)

            {

                timeMode = 0;

                Write_Dgus(0x3A12, 139);

            }    

        }

        else if(Va == 0x0303)

        {

            if(timeMode == 0)

            {

                timeMode = 1;

                Write_Dgus(0x3A12, 242);

            }

        }

        else if(Va >= 0x0304 && Va <= 0x0309)

        {

            u16 switchpage[2] = {0x5A01, 19};

            backPage = 3;

            backNum = Va;

            setNum = timrIntervalHour[Va - 0x0304];

            Write_Dgus(0x4000 + 0, setNum % 10);

            Write_Dgus(0x4000 + 2, setNum / 10 % 10);

            Write_Dgus(0x4000 + 4, setNum / 100 % 10);

            Write_Dgus(0x4000 + 6, setNum / 1000 % 10);

            write_dgus_vp(0x0084, switchpage, 2);

        }

        else if(Va >= 0x030A && Va <= 0x030F)

        {

            u16 switchpage[2] = {0x5A01, 19};

            backPage = 3;

            backNum = Va;

            setNum = currentTime[Va - 0x030A];

            Write_Dgus(0x4000 + 0, setNum % 10);

            Write_Dgus(0x4000 + 2, setNum / 10 % 10);

            Write_Dgus(0x4000 + 4, setNum / 100 % 10);

            Write_Dgus(0x4000 + 6, setNum / 1000 % 10);

            write_dgus_vp(0x0084, switchpage, 2);

        }

        //调节数据页

        else if(Va == 0x0400)   //确定

        {   

            u16 switchpage[2] = {0x5A01, 0x0000};

            switchpage[1] = backPage;

            if(backPage == 1)   //返回状态页

            {

                placeGramNum = setNum;

                Write_Dgus(0x1140 + 0, placeGramNum % 10);

                Write_Dgus(0x1140 + 2, placeGramNum / 10 % 10);

            }

            else if(backPage == 3)

            {

                if(backNum >= 0x0304 && backNum <= 0x0309)

                {

                    u16 select = 0;

                    select = (backNum - 0x0304) * 0x10;

                    timrIntervalHour[backNum - 0x0304] = setNum;

                    Write_Dgus(0x3010 + select + 0, setNum % 10);

                    Write_Dgus(0x3010 + select + 2, setNum / 10 % 10);

                }

                else if(backNum >= 0x030A && backNum <= 0x030F)

                {

                    u16 select = 0;

                    select = (backNum - 0x0304) * 0x10;

                    currentTime[backNum - 0x030A] = setNum;

                    if(backNum == 0x030A)

                    {

                        Write_Dgus(0x3010 + select + 0, setNum % 10);

                        Write_Dgus(0x3010 + select + 2, setNum / 10 % 10);

                        Write_Dgus(0x3010 + select + 4, setNum / 100 % 10);

                        Write_Dgus(0x3010 + select + 6, setNum / 1000 % 10);

                    }

                    else

                    {

                        Write_Dgus(0x3010 + select + 0, setNum % 10);

                        Write_Dgus(0x3010 + select + 2, setNum / 10 % 10);

                    }

                }

            }

            write_dgus_vp(0x0084, switchpage, 2);

        }

        else if(Va == 0x0401)   //退出

        {   

            u16 switchpage[2] = {0x5A01, 0x0000};

            switchpage[1] = backPage;

            write_dgus_vp(0x0084, switchpage, 2);

        }

        else if(Va == 0x0402)   //数值增加

        {

            setNum++;

            Write_Dgus(0x4000 + 0, setNum % 10);

            Write_Dgus(0x4000 + 2, setNum / 10 % 10);

            Write_Dgus(0x4000 + 4, setNum / 100 % 10);

            Write_Dgus(0x4000 + 6, setNum / 1000 % 10);

        }

        else if(Va == 0x0403)   //数值减少

        {

            if(setNum > 0)

                setNum--;

            Write_Dgus(0x4000 + 0, setNum % 10);

            Write_Dgus(0x4000 + 2, setNum / 10 % 10);

            Write_Dgus(0x4000 + 4, setNum / 100 % 10);

            Write_Dgus(0x4000 + 6, setNum / 1000 % 10);

        }

        Write_Dgus(0x1000, 0);

    }

}

gmingxin123
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值