申明:该文借鉴网上博客(出处忘记了)+自己整理,配置测试成功
环境;centos5.11
一、FLV视频发布方式简介
FLV视频有两总发布方式
1、 HTTP方式
这种方式要下载FLV视频文件到本地播放,一旦FLV视频文件下载完成,就不会消耗服务器的资源和带宽,但是拖动功能没有RTMP/RTMP流媒体方式强大,很多视频网站都是用HTTP方式实现的,如:YouTube,土豆,酷6等
2、 RTMP/RTMP流媒体方式
这种方式不用下载FLV视频文件到本地,可以实时的播放flv文件,可以任意拖拽播放进度条,但是比较消耗服务器的资源,
二、使用nginx来搭建flv流媒体服务器
1、使用nginx来搭建flv流媒体服务器简介
nginx中的Flv Stream模块能实现flv流媒体的功能,而且支持flv视频进度条拖拽,另外nignx还可以作为方向代理服务器代理后端基于Flash Media Server或者Red5的RTMP/RTMP流媒体服务器
2、 下面我们就来搭建一个完整的nginx流媒体服务器
# vim/etc/ld.so.conf.d/local-libraries.conf
/usr/local/lib
下载地址:http://softlayer-dal.dl.sourceforge.net/project/faac
#tar zxf faac-1.28.tar.gz
#cd faac-1.28
#./configure --prefix=/usr/local/ --enable-shared
#make && make install
#tar zxf lame-3.98.4.tar.gz
#cd lame-3.98.4
#./configure --prefix=/usr/local/ --enable-shared
#make && make install
#tar zxf opencore-amr-0.1.3.tar.gz
#cd opencore-amr
#./configure --prefix=/usr/local/ --enable-shared
#make && make install
yasm(x264 configure need)
#tar zxf yasm-1.3.0.tar.gz
#cd yasm-1.3.0
#./configure --prefix=/usr/local/
#make && make install
faad2
# tar -xzvf faad2-2.7.tar.gz -C /usr/local/src
#./configure --prefix=/usr/local--enable-shared
#make && make install
x264
wget ftp://ftp.videolan.org/pub/x264/snapshots/last_x264.tar.bz2
#tar jxf last_x264.tar.bz2
#cd x264-snapshot-20141124-2245
#./configure --prefix=/usr/local --enable-shared
#make && make install
需注意
ogg
#wget http://downloads.xiph.org/releases/ogg/libogg-1.3.2.tar.xz
#xz -d libogg-1.3.2.tar.xz
#tar xf libogg-1.3.2.tar
#cd libogg-1.3.2
#./configure --prefix=/usr/local --enable-shared
#make && make install
xvid
#wget http://downloads.xvid.org/downloads/xvidcore-1.3.3.tar.gz
#tar zxf xvidcore-1.3.3.tar.gz
#cd xvidcore/build/generic/
#./configure --prefix=/usr/local
#make && make install
Libvpx
#git clonehttp://git.chromium.org/webm/libvpx.git
#cd libvpx
#./configure --enable-shared
#make
#make install
Libvorbis
#wgethttp://downloads.xiph.org/releases/vorbis/libvorbis-1.3.3.tar.gz
#tar xzvf libvorbis-1.3.3.tar.gz
#cd libvorbis-1.3.3
#./configure
#make
#make install
nasm,
#tar -xjvf nasm-2. 10.05.tar.bz2 -C /usr/local/src
#./configure --prefix=/usr/local--enable-shared
#make && make install
Ffmpeg
3gp,
源码网址:http://www.3gpp.org/ftp/Specs
包括两个包:amrwb_float下载、amr_float下载,安装:解压ffmpeg的源码包后,进入ffmpeg-checkout-20070130/libavcodec/,新建两个新目录 amrwb_float和amr_float,然后解压这两个包,把amrwb_float里面的所有文件复制到amrwb_float,把 amr_float的所有文件复制到amr_float
wget http://ffmpeg.org/releases/ffmpeg-2.8.2.tar.bz2
# tar -xjvf ffmpeg-2.8.2.tar.bz2 -C/usr/local/src
#cd /usr/local/src/ffmpeg-2.8.2/libavcodec
#mkdir amrwb_fload
#mkdir amr_fload
# cd /usr/local/src/ffmpeg-2.8.2
#./configure --prefix=/usr/local/--enable-libxvid --enable-libx264 --enable-libmp3lame --enable-libvorbis--enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfaac --enable-gpl --enable-version3 --enable-nonfree --enable-shared --enable-zlib--enable-bzlib --enable-libvorbis
#make#wait about 10 minutes
#make install
#ldconfig –v
#ffmpeg -version
修改/etc/ld.so.conf如下:
#vim/etc/ld.so.conf
include ld.so.conf.d/*.conf
/lib
/lib64
/usr/lib
/usr/lib64
/usr/local/lib
/usr/local/lib64
/usr/local/ffmpeg/lib
1)、Nginx服务器的安装
#安装zlib
#tar xzvf zlib-1.2.7.tar.gz -C /usr/local/src
#cd/usr/local/src/zlib-1.2.7
#./configure–prefix=/usr/local/zlib
# make&& make install
#安装pcre
#tarzxvf pcre-8.36.tar.gz
#cdpcre-8.36
# ./configure--prefix=/usr/local/pcre
# make&& make install
#添加mp4支持模块
# wgethttp://h264.code-shop.com/download/nginx_mod_h264_streaming-2.2.7.tar.gz
#tar -zxvf nginx_mod_h264_streaming-2.2.7.tar.gz -C /usr/local/src/
#安装nginx
#groupadd www
# useradd -g www www
#wget http://www.nginx.eu/download/sources/nginx-0.7.9.tar.gz #nginx不能太新
#tarxzvf nginx-0.7.9.tar.gz
# cdnginx-0.7.9
# ./configure--add-module=/usr/local/src/nginx_mod_h264_streaming-2.2.7--with-http_ssl_module --with-pcre=/usr/local/src/pcre-8.36--with-zlib=/usr/local/src/zlib-1.2.7 --user=www --group=www--prefix=/usr/local/nginx--with-http_flv_module --with-http_stub_status_module
# make && make install
../nginx_mod_h264_streaming-2.2.7/src/ngx_http_streaming_module.c:158:错误:‘ngx_http_request_t’ 没有名为 ‘zero_in_uri’ 的成员
make[1]: *** [objs/addon/src/ngx_http_h264_streaming_module.o] 错误 1
make[1]: Leaving directory `/usr/local/src/nginx-1.9.7'
make: *** [build] 错误 2
解决办法:
修改ngx_http_streaming_module.c,注释掉
if (r->zero_in_uri) {
return NGX_DECLINED;
}
#vim /usr/local/src/nginx_mod_h264_streaming-2.2.7/src/ngx_http_streaming_module.c
if(r->zero_in_uri) {
returnNGX_DECLINED;
}
改为
/*
if(r->zero_in_uri) {
returnNGX_DECLINED;
}
*/
# ./configure--add-module=/usr/local/src/nginx_mod_h264_streaming-2.2.7--with-http_ssl_module --with-pcre=/usr/local/src/pcre-8.36--with-zlib=/usr/local/src/zlib-1.2.7 --user=www --group=www --prefix=/usr/local/nginx--with-http_flv_module --with-http_stub_status_module
#yum install git
git clonegit://github.com/arut/nginx-rtmp-module.git
#./configure--prefix=/usr/local/nginx --add-module=/usr/local/src/nginx_mod_h264_streaming-2.2.7 --with-http_ssl_module --with-pcre=/usr/local/src/pcre-8.36--with-http_flv_module --with-zlib=/usr/local/src/zlib-1.2.7--user=www --group=www --with-http_gzip_static_module--with-http_stub_status_module --with-http_mp4_module--add-module=../nginx-rtmp-module --add-module=../nginx-rtmp-module/hls --with-cc-opt=-I/usr/local/ffmpeg/include--with-ld-opt='-L/usr/local/ffmpeg/lib -Wl,-rpath=/usr/local/ffmpeg/lib'
# make && make install
2)、安装yamdi
yadmi的作用是为flv文件添加关键帧,才能实现拖动播放
#下载yadmi
wget http://sourceforge.net/projects/yamdi/files/yamdi/1.4/yamdi-1.4.tar.gz/download
#安装yadmi
tarxzvf yamdi-1.4.tar.gz
cd yamdi-1.4
make &&make install
使用方法:yamdi -i input.flv -o out.flv
给input.flv文件 添加关键帧,输出为out.flv文件
3)、配置nginx
vi/usr/local/nginx/conf/nginx.conf 添加以下内容(根据自身情况修改):
user www www;
worker_processes 30;
error_log /usr/local/nginx/logs/error.log crit;
pid /usr/local/nginx/logs/nginx.pid;
events {
use epoll;
worker_connections 65535;
}
http {
include mime.types;
default_type application/octet-stream;
log_formatmain '$remote_addr - $remote_user [$time_local] '
'"$request"$status $bytes_sent '
'"$http_referer""$http_user_agent" '
'"$gzip_ratio"';
keepalive_timeout 60;
server_names_hash_bucket_size 128;
client_header_buffer_size 32k;
large_client_header_buffers 432k;
access_log off;
gzip on;
gzip_min_length 1100;
gzip_buffers 48k;
gzip_types text/plain;
output_buffers 132k;
postpone_output 1460;
client_header_timeout 3m;
client_body_timeout 3m;
send_timeout 3m;
sendfile on;
tcp_nopush on;
tcp_nodelay on;
######################################################################
server {
listen 80;
server_name 192.168.1.105;
root /usr/local/nginx/html/flv_file/;
limit_rate_after5m; ####在flv视频文件下载了5M以后开始限速
limit_rate512k; ####速度限制为512K
index index.html;
charset utf-8;
location ~ \.flv {
flv;
}
location ~ \.mp4$ {
mp4;
}
error_page 500502 503 504 /50x.html;
location =/50x.html {
root html;
}
}
}
4)、基本上已经设置完毕,但是此时我们测试的时候还需要一个支持拖拽播放的flash播放器,开源的JW Player就可以实现这样的功能,我将编译的播放器上传上来,供大家下载:
下载链接:http://blogimg.chinaunix.net/blog/upfile2/100607142612.rar
下载播放器后,上传到上面设置的/usr/local/nginx/html/flv_file/目录下,闭关把flv视频文件也放到该目录下!
5)、启动nginx后测试:
#/usr/local/nginx/conf/nginx -t #测试配置
#/usr/local/nginx/conf/nginx #启动
#ps -ef | grep"nginx: master process" | grep -v "grep" | awk -F ' ''{print $2}'
#kill -9 16450 #结束进程
http://192.168.100.200/player.swf?type=http&file=zimu3.flv
http://192.168.100.200/player.swf?type=rtmp&file=zimu3.flv
说明: #我的ip是192.168.1.105
#player.swf是我的JW Player播放器
#http是表示居于http分发方式
#test1.flv是我的flv视频文件