Etcd源码阅读笔记1

type Client struct {
	Cluster
	KV    //KV存储
	Lease
	Watcher
	Auth
	Maintenance

	conn *grpc.ClientConn

	cfg           Config
	creds         grpccredentials.TransportCredentials
	resolverGroup *endpoint.ResolverGroup
	mu            *sync.RWMutex

	ctx    context.Context
	cancel context.CancelFunc

	// Username is a user name for authentication.
	Username string
	// Password is a password for authentication.
	Password        string
	authTokenBundle credentials.Bundle

	callOpts []grpc.CallOption

	lg *zap.Logger
}

type KV interface {
	// Put puts a key-value pair into etcd.
	// Note that key,value can be plain bytes array and string is
	// an immutable representation of that bytes array.
	// To get a string of bytes, do string([]byte{0x10, 0x20}).
	Put(ctx context.Context, key, val string, opts ...OpOption) (*PutResponse, error)

	// Get retrieves keys.
	// By default, Get will return the value for "key", if any.
	// When passed WithRange(end), Get will return the keys in the range [key, end).
	// When passed WithFromKey(), Get returns keys greater than or equal to key.
	// When passed WithRev(rev) with rev > 0, Get retrieves keys at the given revision;
	// if the required revision is compacted, the request will fail with ErrCompacted .
	// When passed WithLimit(limit), the number of returned keys is bounded by limit.
	// When passed WithSort(), the keys will be sorted.
	//获取检索钥匙。由默认情况下，Get将返回“key”的值，如果任何时候通过WithRange（end），Get将返回范围[key，end]中的键。
	//使用FromKey（）传递时，Get返回大于或等于的键钥匙。什么时候通过rev（rev），rev>0，Get检索给定版本的密钥；
	//如果压缩了所需的修订，则请求将失败并显示errcompressed。当通过limit（limit）传递时，返回的键的数量将受到限制。
	//什么时候通过了sort（），键将被排序。
	Get(ctx context.Context, key string, opts ...OpOption) (*GetResponse, error)

	// Delete deletes a key, or optionally using WithRange(end), [key, end).
	Delete(ctx context.Context, key string, opts ...OpOption) (*DeleteResponse, error)

	// Compact compacts etcd KV history before the given rev.
	Compact(ctx context.Context, rev int64, opts ...CompactOption) (*CompactResponse, error)

	// Do applies a single Op on KV without a transaction.
	// Do is useful when creating arbitrary operations to be issued at a
	// later time; the user can range over the operations, calling Do to
	// execute them. Get/Put/Delete, on the other hand, are best suited
	// for when the operation should be issued at the time of declaration.
	Do(ctx context.Context, op Op) (OpResponse, error)

	// Txn creates a transaction.
	Txn(ctx context.Context) Txn
}

type Context interface {
	// Deadline returns the time when work done on behalf of this context
	// should be canceled. Deadline returns ok==false when no deadline is
	// set. Successive calls to Deadline return the same results.
	//Deadline返回代表此上下文完成的工作应取消的时间。如果没有设置截止日期，则Deadline返回ok==false。
	//连续调用Deadline返回相同的结果。
	Deadline() (deadline time.Time, ok bool)

	// Done returns a channel that's closed when work done on behalf of this
	// context should be canceled. Done may return nil if this context can
	// never be canceled. Successive calls to Done return the same value.
	// The close of the Done channel may happen asynchronously,
	// after the cancel function returns.
	//
	// WithCancel arranges for Done to be closed when cancel is called;
	// WithDeadline arranges for Done to be closed when the deadline
	// expires; WithTimeout arranges for Done to be closed when the timeout
	// elapses.
	//
	// Done is provided for use in select statements:
	//
	//  // Stream generates values with DoSomething and sends them to out
	//  // until DoSomething returns an error or ctx.Done is closed.
	//  func Stream(ctx context.Context, out chan<- Value) error {
	//  	for {
	//  		v, err := DoSomething(ctx)
	//  		if err != nil {
	//  			return err
	//  		}
	//  		select {
	//  		case <-ctx.Done():
	//  			return ctx.Err()
	//  		case out <- v:
	//  		}
	//  	}
	//  }
	//
	// See https://blog.golang.org/pipelines for more examples of how to use
	// a Done channel for cancellation.
	Done() <-chan struct{}

	// If Done is not yet closed, Err returns nil.
	// If Done is closed, Err returns a non-nil error explaining why:
	// Canceled if the context was canceled
	// or DeadlineExceeded if the context's deadline passed.
	// After Err returns a non-nil error, successive calls to Err return the same error.
	Err() error

	// Value returns the value associated with this context for key, or nil
	// if no value is associated with key. Successive calls to Value with
	// the same key returns the same result.
	//
	// Use context values only for request-scoped data that transits
	// processes and API boundaries, not for passing optional parameters to
	// functions.
	//
	// A key identifies a specific value in a Context. Functions that wish
	// to store values in Context typically allocate a key in a global
	// variable then use that key as the argument to context.WithValue and
	// Context.Value. A key can be any type that supports equality;
	// packages should define keys as an unexported type to avoid
	// collisions.
	//
	// Packages that define a Context key should provide type-safe accessors
	// for the values stored using that key:
	//
	// 	// Package user defines a User type that's stored in Contexts.
	// 	package user
	//
	// 	import "context"
	//
	// 	// User is the type of value stored in the Contexts.
	// 	type User struct {...}
	//
	// 	// key is an unexported type for keys defined in this package.
	// 	// This prevents collisions with keys defined in other packages.
	// 	type key int
	//
	// 	// userKey is the key for user.User values in Contexts. It is
	// 	// unexported; clients use user.NewContext and user.FromContext
	// 	// instead of using this key directly.
	// 	var userKey key
	//
	// 	// NewContext returns a new Context that carries value u.
	// 	func NewContext(ctx context.Context, u *User) context.Context {
	// 		return context.WithValue(ctx, userKey, u)
	// 	}
	//
	// 	// FromContext returns the User value stored in ctx, if any.
	// 	func FromContext(ctx context.Context) (*User, bool) {
	// 		u, ok := ctx.Value(userKey).(*User)
	// 		return u, ok
	// 	}
	Value(key interface{}) interface{}
}