3GPP TS 29244-g30 中英文对照 | 6.3.2 PFCP Session Establishment Procedure

学习5G知识，势必要去阅读相关的技术标准，而纯英文的标准协议对于初学者来说是个门槛。

个人在学习5G标准3GPP TS 29244-g30过程中，也发现google的机器翻译实在晦涩难懂，所以个人在借助百度翻译（中国人更懂中文）的同时，人工对每句话进行了校对。

在自己学习的同时，也将翻译内容分享给给广大网友。由于个人能力有限，翻译不到位的地方还请各位网友们指正。 

6.3.2 PFCP Session Establishment Procedure PFCP会话建立程序

6.3.2.1 General

The PFCP Session Establishment procedure shall be used to setup a PFCP session between CP function and UP function and configure Rules in the UP function so that the UP function can handle incoming packets.

应使用PFCP Session Establishment程序在CP功能和UP功能之间建立PFCP会话，并在UP功能中配置规则，以便UP功能能够处理传入的数据包。

6.3.2.2 CP Function Behaviour CP功能行为

The CP function initiates the PFCP Session Establishment procedure to create a PFCP session for a PDN connection, or IP-CAN session or TDF session or for applying a certain IP packets treatment which is not associated with any PDN connection or TDF session.

CP功能启动PFCP Session Establishment过程，以便为PDN连接、IP-CAN会话或TDF会话或应用与任何PDN连接或TDF会话无关的特定IP分组处理创建PFCP会话。

The CP function:

- shall send the PFCP Session Establishment Request message with a new PFCP F-SEID together with Rules to be created;

-应发送带有新的PFCP F-SEID的PFCP Session Establishment Request消息以及要创建的Rule；

- may include its current Recovery Time Stamp as specified in clause 19A of TS 3GPP TS 23.007 [24].

-可能包括其当前Recovery Time Stamp。

When the CP function receives a PFCP Session Establishment Response with cause success, the CP function shall continue with the procedure which triggered the PFCP Session Establishment procedure.

当CP功能收到原因成功的PFCP Session Establishment Response时，CP功能应继续执行触发PFCP Session Establishment程序的程序。

6.3.2.3 UP Function Behaviour UP功能行为

When the UP function receives a PFCP Session Establishment Request message it shall:

当UP功能收到PFCP Session Establishment Request会话建立请求消息时，它应：

- store and apply the rules received in the request and send a PFCP Session Establishment Response with cause "success", if all rules in the PFCP Session Establishment Request are stored and applied;

-存储并应用请求中接收到的规则，如果存储并应用了PFCP Session Establishment Request中的所有规则，则发送原因为“success”的PFCP Session Establishment Response；

- Otherwise, if at least one rule failed to be stored or applied, return an appropriate error cause value with the Rule ID of the Rule causing the first error, discard all the received rules and not create any PFCP session context.

-否则，如果至少有一个规则存储或应用失败，则返回一个适当的错误原因值，其中包含导致第一个错误的Rule的Rule ID，放弃所有接收到的规则，并且不创建任何PFCP会话上下文。