Fabric-Solo多机多节点部署方案

最新推荐文章于 2023-04-26 11:32:00 发布
最新推荐文章于 2023-04-26 11:32:00 发布
阅读量879 收藏 6
点赞数 1
分类专栏： Fabric 源码解析
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/guoqingshuang/article/details/89185407
版权

Fabric-Solo多机多节点部署方案

Solo多机多节点部署是在单机单节点部署方案的基础上进行的，我简单介绍下我的部署方案：首先在虚拟机上搭建好单机单节点的fabric网络，然后将搭建好的虚拟机进行复制出4台，一共5台，其中一台作为Orderer节点，其余四台作为Peer节点。
对于服务器的配置由于我电脑性能的原因，所以每台服务器都是1C+2G+40G的配置，当然配置越高越好，我这里只用作测试，所以不需要太高的配置。
好！废话不多说，开始搭建！
如果在搭建的过程中出现连接错误，可尝试ssh免密码登录解决！

第一步配置服务器

这里是先搭建好一台单机单节点的服务器，然后再以这台服务器为模板去创建其他的服务器。（简单来说就是把服务器在复制一份，然后在虚拟机里直接打开就可以了）
服务器IP                  Hostname                 组织机构
10.82.80.83       orderer.example.com        Orderer
10.82.80.82       peer0.org1.example.com     Org1
10.82.80.84       peer0.org2.example.com     Org2
10.82.80.85       peer1.org1.example.com     Org1
10.82.80.86       peer1.org2.example.com     Org2

第二步部署Orderer节点

编写docker-orderer.yaml启动文件，具体源码如下：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      # - ORDERER_GENERAL_LOGLEVEL=error
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7050
      #- ORDERER_GENERAL_GENESISPROFILE=AntiMothOrdererGenesis
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
      #- ORDERER_GENERAL_LEDGERTYPE=ram
      #- ORDERER_GENERAL_LEDGERTYPE=file
      # enabled TLS
      - ORDERER_GENERAL_TLS_ENABLED=false
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric
    command: orderer
    volumes:
    - ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/var/hyperledger/orderer/msp
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/var/hyperledger/orderer/tls
    networks:
      default:
        aliases:
          - aberic
    ports:
      - 7050:7050

然后将编写好的启动文件上传到10.82.80.83服务器的~/go/src/github.com/hyperledger/fabric/aberic目录下，并运行如下命令启动Orderer排序服务节点：

~/go/src/github.com/hyperledger/fabric/aberic$ docker-compose -f docker-orderer.yaml  up –d

启动完成后查看是否启动成功：

docker ps

第三部部署peer0.org1节点

编写docker-peer0.org1.yaml启动文件，源码如下：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/15d53ba909ffe5ef0038b1125b58e0ebc521f6693e43652307a92ee1c9c9d258_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/15d53ba909ffe5ef0038b1125b58e0ebc521f6693e43652307a92ee1c9c9d258_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
      - "orderer.example.com:10.82.80.83"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer0.org1.example.com
    extra_hosts:
      - "orderer.example.com:10.82.80.83"
      - "peer0.org1.example.com:10.82.80.82"

然后将编写好的启动文件上传到10.82.80.82服务器的~/go/src/github.com/hyperledger/fabric/aberic目录下，并运行如下命令启动Orderer排序服务节点：

~/go/src/github.com/hyperledger/fabric/aberic$ docker-compose -f docker-peer0.org1.yaml  up –d

启动完成后查看是否启动成功：

docker ps

启动成功后通过如下命令进入cli容器进行channel的相关操作：

~/go/src/github.com/hyperledger/fabric/aberic$ docker exec -it cli bash

创建通道：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer channel create -o orderer.example.com:7050 -c mychannel -t 50 -f ./channel-artifacts//mychannel.tx

加入通道：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer channel join -b mychannel.block

安装链码：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode install -n mychannel -p github.com/hyperledger/fabric/aberic/chaincode/go/chaincode_example02 -v 1.0

实例化链码：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode instantiate -o orderer.example.com:7050 -C mychannel -n mychannel -c'{"Args":["init","A","10","B","10"]}' -P "OR ('Org1MSP.member')" -v 1.0

查询A账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","A"]}'

查询B账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","B"]}'

A向B转账5

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode invoke -C mychannel -n mychannel -c '{"Args":["invoke","A","B","5"]}'

第四步部署peer1.org1节点

编写docker-peer1.org1.yaml启动文件，源码如下：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org1.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/ab7dca5e5f6b1cc24c2023764c5b34d1f78d8614d2a11e74178d2d5509bd3be8_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer1.org1.example.com:
    container_name: peer1.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer1.org1.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer1.org1.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:10.82.80.83"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer1.org1.example.com
    extra_hosts:
     - "orderer.example.com:10.82.80.83"
     - "peer1.org1.example.com:10.82.80.85"

然后将编写好的启动文件上传到10.82.80.85服务器的~/go/src/github.com/hyperledger/fabric/aberic目录下，并运行如下命令启动Orderer排序服务节点：

~/go/src/github.com/hyperledger/fabric/aberic$ docker-compose -f docker-peer1.org1.yaml  up –d

启动完成后查看是否启动成功：

docker ps

首先是加入通道，peer1.org1若想加入一个通道，需要获取该通道的block文件，以 mychannel.block 文件为入口，该文件位于 peer0.org1 主机 cli 容器的 /opt/gopath/src/github.com/hyperledger/fabric/peer 目录下。在cli容器内/opt/gopath/src/github.com/hyperledger/fabric/peer目录下可以看到mychannel.block文件，现在需要将该文件从容器中复制到物理机真是路径下，退出当前容器并执行如下命令，将mychannel.block文件复制到~/go/src/github.com/hyperledger/fabric/aberic/channel-artifacts目录下：

cd ~/go/src/github.com/hyperledger/fabric/aberic
docker cp <ContainerID>:/opt/gopath/src/github.com/hyperledger/fabric/peer/mychannel.block ./channel-artifacts/

ContainerID为容器的ID,可以用cli代替，也可以是有一串数字和字母组合成ID号。

将 mychannel.block 文件拷贝到 peer1.org1 主机 ~/go/src/github.com/hyperledger/fabric/aberic/channel-artifacts 目录下，之后登入 peer1.org1 主机，然后将mychannel.block 文件拷贝到peer1.org1 主机的cli容器中：

cd  ~/go/src/github.com/hyperledger/fabric/aberic
docker cp ./channel-artifacts/mychannel.block cli:/opt/gopath/src/github.com/hyperledger/fabric/peer/

加入通道：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer channel join -b mychannel.block

安装链码：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode install -n mychannel -p github.com/hyperledger/fabric/aberic/chaincode/go/chaincode_example02 -v 1.0

查询A账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","A"]}'

查询B账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","B"]}'

A向B转账5

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode invoke -C mychannel -n mychannel -c '{"Args":["invoke","A","B","5"]}'

第五步部署peer0.org2节点

编写docker-peer0.org2.yaml启动文件，源码如下：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org2.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer0.org2.example.com:
    container_name: peer0.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer0.org2.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org2.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:10.82.80.83"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer0.org2.example.com
    extra_hosts:
     - "orderer.example.com:10.82.80.83"
     - "peer0.org2.example.com:10.82.80.84"

在这里需要注意要将证书的文件名替换为org2的,MSPID和IP地址要换掉。

将 mychannel.block 文件拷贝到 peer1.org1 主机 ~/go/src/github.com/hyperledger/fabric/aberic/channel-artifacts 目录下，之后登入 peer1.org1 主机，然后将mychannel.block 文件拷贝到peer0.org2 主机的cli容器中：

cd  ~/go/src/github.com/hyperledger/fabric/aberic
docker cp ./channel-artifacts/mychannel.block cli:/opt/gopath/src/github.com/hyperledger/fabric/peer/

加入通道：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer channel join -b mychannel.block

安装链码：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode install -n mychannel -p github.com/hyperledger/fabric/aberic/chaincode/go/chaincode_example02 -v 1.0

查询A账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","A"]}'

查询B账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","B"]}'

A向B转账5（注意这里是不成功的，因为背书策略的原因）

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode invoke -C mychannel -n mychannel -c '{"Args":["invoke","A","B","5"]}'

第六步部署peer1.org2节点

编写docker-peer0.org2.yaml启动文件，源码如下：

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/etc/hyperledger/fabric-ca-server
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /etc/hyperledger/fabric-ca-server-config/ca.org2.example.com-cert.pem --ca.keyfile /etc/hyperledger/fabric-ca-server-config/638c62f6073cf84d4a897b90fa31c0d53c4c2ffaa0b0be1c3c7df233eb33a27a_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org2.example.com/ca/:/etc/hyperledger/fabric-ca-server-config

  peer1.org2.example.com:
    container_name: peer1.org2.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer1.org2.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer1.org2.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer1.org2.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/etc/hyperledger/fabric/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/etc/hyperledger/fabric/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/etc/hyperledger/fabric/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp:/etc/hyperledger/fabric/msp
        - ./crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls:/etc/hyperledger/fabric/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic
    extra_hosts:
     - "orderer.example.com:10.82.80.83"

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer1.org2.example.com:7051
      - CORE_PEER_LOCALMSPID=Org2MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/aberic/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - peer1.org2.example.com
    extra_hosts:
     - "orderer.example.com:10.82.80.83"
     - "peer1.org2.example.com:10.82.80.86"

在这里需要注意要将证书的文件名替换为org2的,MSPID和IP地址要换掉。

将 mychannel.block 文件拷贝到 peer1.org1 主机 ~/go/src/github.com/hyperledger/fabric/aberic/channel-artifacts 目录下，之后登入 peer1.org1 主机，然后将mychannel.block 文件拷贝到peer0.org2 主机的cli容器中：

cd  ~/go/src/github.com/hyperledger/fabric/aberic
docker cp ./channel-artifacts/mychannel.block cli:/opt/gopath/src/github.com/hyperledger/fabric/peer/

加入通道：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer channel join -b mychannel.block

安装链码：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode install -n mychannel -p github.com/hyperledger/fabric/aberic/chaincode/go/chaincode_example02 -v 1.0

查询A账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","A"]}'

查询B账户：

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode query -C mychannel -n mychannel -c '{"Args":["query","B"]}'

A向B转账5（注意这里是不成功的，因为背书策略的原因）

/opt/gopath/src/github.com/hyperledger/fabric/peer# peer chaincode invoke -C mychannel -n mychannel -c '{"Args":["invoke","A","B","5"]}'

到此Solo多机多节点部署完成！

JimmyLegend
关注
  • 1
    点赞
  • 踩
  • 6
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
Fabric 多机部署
10-23
fabric 的多机集群部署教程，包括 1 个 Orderer排序节点和 4 个 peer 节点。
Fabric多机部署
Keruila的博客
04-17 768
准备工作 本次只准备了两台电脑，一个orderer一个peer，修改两台电脑的hosts，194为orderer，109为peer： 192.168.2.194 orderer.flt.cn 192.168.2.109 peer0.dev.flt.cn 新建一个文件夹a_test，用来存放生成的文件（之后用的） 将bin文件夹和configtx.yaml和crypto-config...
fabric 多机部署
qq_26563551的博客
11-17 2106
Fabric多机部署步骤 1 Fabric CA生成 1.1 环境准备和yaml文件编写 CA 镜像装载，版本根据需求而定，本次版本是1.4.4。 CA 的yaml文件编写。 需要⚠️yaml文件有标准格式 //版本 version: '2' //网络名称 networks: rootchain: //定义服务 services: //服务名称 lzsk.ca.chain.com: //容器名称 container_name: lzsk.ca.chai...
fabric多节点部署中文
03-15
超级账本fabric多节点集群部署，超级账本fabric多节点集群部署
Fabric Docker：多机多节点部署生产网络
最新发布
06-25
在多机多节点部署生产网络时，我们需要以下关键步骤： 1. **环境准备**：确保所有参与节点的硬件配置足够，并安装Docker和Docker Compose。Docker Compose是一个用于定义和运行多容器Docker应用的工具，它通过一个`...
hyperledger fabric多机部署
09-22
多机部署是Fabric网络的重要组成部分，特别是在生产环境中，为了提高系统的容错性、性能和安全性，通常会在多个物理或虚拟节点上分散部署不同的组件。 在Hyperledger Fabric 1.4的多机部署中，主要涉及以下几个关键...
hyperledger fabric单机单节点快速部署实例
01-20
hyperledger fabric单机单节点网络,solo共识机制，包含Java chaincode，部署之后直接run.sh脚本
HyperLedger Fabric(单机Solo版)
01-07
本次环境还是基于Vagrant，创建1peer节点1组织1个排序节点的fabric网络，其实这个和first-network差不多，只是使用手动的方式完成fabric网络的部署。 实验环境搭建 创建虚拟机 创建vagrant配置文件，这里指定操作...
CentOS7 - hyperledger fabric1.1 - 1+4多机部署（solo共识）配置文件
07-14
在这个"CentOS7 - hyperledger fabric1.1 - 1+4多机部署（solo共识）配置文件"中，我们将深入理解如何在一个由一台Orderer节点和四台Peer节点组成的网络上部署和配置Hyperledger Fabric。 首先，让我们从基本概念...
多机部署Hyperledger Fabric+Composer(两台机器)
03-01
Land-network网络由两个组织组成：Org1和Org2。组织Org1使用域名org1.example.com。会员服务提供商（MSP）Org1被称为Org1MSP。组织Org2使用域名org2.example.com。MSP for Org2被称为Org2MSP。在本教程中，您将部署一个blockchain业务网络，无论是组织Org1，Org2并能与之交互。 两台机器分别是VM1(192.168.1.101)和VM2(192.168.1.102)。Composer版本采用0.20.5，Hyperledger Fabric的版本采用1.3. VM1(192.168.1.101): orderer.example.com，ca.org1.example.com，peer0.org1.example.com，couchdb0，peer1.org1.example.com，couchdb1，mongo，landTransaction，loginapp VM2(192.168.1.102): ca.org1.example.com，peer0.org2.example.com，couchdb0，peer1.org2.example.com，couchdb1，mongo，landTransaction，loginapp
HyperLedger Fabric开发实战 – 部署单机多节点网络
01-08
第3章 部署单机多节点网络 在进行基础环境搭建和fabric环境部署完后，可以得到一个完全干净的空服务器状态。 3.1 生成证书文件 如果运行过e2e_cli案例，则执行如下命令即可做到环境清理(…/fabric/examples/e2e_cli/)： ./network_setup.sh down 在Fabric源码目录下创建一个名为 aberic 的目录，该目录为当前即将运行的单机多节点项目目录。 cd /home/zyp/development/go/src/github.com/hyperledger/fabric/ mkdir aberic 将第2章中提到的 bin/目录下的文件
Fabric部署进阶篇 - 多机部署.docx
05-20
续：Fabric部署基础篇 - 单机部署 fabric单机版只能用于测试和学习，生产环境还是建议使用多机部署。 这里讲的多机，并不是简单地把单机版中的那些docker分开在多个机器上运行而构成的多机版，而是真正在多台服务器上，使用配置和可执行文件启动不同角色，构成的多机网络。 目录 Fabric部署进阶篇 - 多机部署 1 一、 基础环境 1 二、 环境准备 1 1. 角色IP规划 1 2. 配置域名解析 2 3. 关闭防火墙 2 三、 部署网络 2 1. 材料准备 3 2. 依次启动各个角色 4 四、 准备客户端 8 五、 创建通道&加入通道 9 1. 创建通道 9 2. 加入通道 10 3. 更新锚节点 10 六、 验证网络 10 1. 安装链码 11 2. 实例化链码 11 3. 查询 12 4. 交易 12 附录： 14 1. crypto-config 14 2. configtx.yaml 17
fabric多机部署（一点笔记）
Tree_sea的博客
03-27 2367
对文章（多机部署fabric） https://blog.csdn.net/bean_business/article/details/110100669 的步骤遇到问题记录一下
Hyperledger Fabric入门实战(八）——Solo多机多节点部署
聂泳的博客
04-17 1211
本章介绍了如何进行Solo多机多节点部署，采用的是打包的方式在不同服务器上部署智能合约。
Fabric1.4.1多机部署
热门推荐
weixin_37875391的博客
09-27 1万+
多机部署 1. 搭建环境 本文使用的是Fabric 1.4版本，搭建solo模式的4+1的架构：1Order，4Peer，机器之间的网络需要互通，保证五台机子上的Fabric网络可以正常运行。举例说明如下： 域名 ip orderer.example.com 172.18.4.49 peer0.org1.example.com 172.18.4.33 peer1.org1.example.com 172.18.4.34 peer0.org2.example.com 172.18.
openstack Grizzly多节点部署方案
胡伟的专栏
05-06 3214
从F版就开始用github上推荐的一个多节点部署方案，但是由于之前出现问题没有把耐心放的足够多，在F版上遇到的网络问题没有解决。刚好现在这个阶段有时间，于是又重新按这里提供的多节点部署G版方案，把G版部署到了物理机上，目前我的这个集    群已经正常运行。以下就按这里提供的方案，将其装载翻译过来，并指出我自己在安装过程中遇到的问题。     他提供的至少要求是三个节点，每个节点上跑ubu
Hyperledger fabric 多机部署
weixin_46698113的博客
04-26 1144
Hyperledger fabric多机部署
fabric手动多机部署
阿苏丶丶的博客
08-29 593
网络中有1个orderer节点，４个组织，每个组织各有１个节点。 名称 ｉｐ 节点Hostname Organization Server 1 10.11.6.118 orderer.example.com     ...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值