Ubuntu 使用虚拟显示器且远程控制

最新推荐文章于 2025-02-05 11:32:27 发布

取经蜗牛

最新推荐文章于 2025-02-05 11:32:27 发布

阅读量3.5k

点赞数

本文链接：https://blog.csdn.net/h_bpdwn/article/details/103727551

版权

已经使用的，备份

Section "Monitor"
  Identifier "Monitor0"
  HorizSync 28.0-80.0
  VertRefresh 48.0-75.0
  # https://arachnoid.com/modelines/
  # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
  Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
EndSection
Section "Device"
  Identifier "Card0"
  Driver "dummy"
  VideoRam 256000
EndSection
Section "Screen"
  DefaultDepth 24
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  SubSection "Display"
    Depth 24
    Modes "1920x1080_60.00"
  EndSubSection
EndSection

安装软件和支持
安装使 Ubuntu 使用虚拟显示器的软件：

$ sudo apt-get install  xserver-xorg-core-hwe-18.04
$ sudo apt-get install  xserver-xorg-video-dummy-hwe-18.04  --fix-missing

修改/创建 xorg.conf

#/usr/share/X11/xorg.conf.d/xorg.conf
Section "Monitor"
  Identifier "Monitor0"
  HorizSync 28.0-80.0
  VertRefresh 48.0-75.0
  # https://arachnoid.com/modelines/
  # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
  Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
EndSection
Section "Device"
  Identifier "Card0"
  Driver "dummy"
  VideoRam 256000
EndSection
Section "Screen"
  DefaultDepth 24
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  SubSection "Display"
    Depth 24
    Modes "1920x1080_60.00"
  EndSubSection
EndSection

参考:

1、How to run X server using xserver-xorg-video-dummy driver on Ubuntu

2、【LINUX】（Ubuntu）无显示器接入，使用虚拟显示器且远程控制