webrtc-m79-视频解码的流程

 1 函数调用关系图

2 代码

void VideoReceiveStream::Start() {
  RTC_DCHECK_RUN_ON(&worker_sequence_checker_);

  if (decoder_running_) {
    return;
  }

  const bool protected_by_fec = config_.rtp.protected_by_flexfec ||
                                rtp_video_stream_receiver_.IsUlpfecEnabled();

  frame_buffer_->Start();

  if (rtp_video_stream_receiver_.IsRetransmissionsEnabled() &&
      protected_by_fec) {
    frame_buffer_->SetProtectionMode(kProtectionNackFEC);
  }

  transport_adapter_.Enable();
  rtc::VideoSinkInterface<VideoFrame>* renderer = nullptr;
  if (config_.enable_prerenderer_smoothing) {
    incoming_video_stream_.reset(new IncomingVideoStream(
        task_queue_factory_, config_.render_delay_ms, this));
    renderer = incoming_video_stream_.get();
  } else {
    renderer = this;
  }

  for (const Decoder& decoder : config_.decoders) {
    std::unique_ptr<VideoDecoder> video_decoder =
        decoder.decoder_factory->LegacyCreateVideoDecoder(decoder.video_format, // VideoDecoderFactory::LegacyCreateVideoDecoder 
                                                          config_.stream_id);
    // If we still have no valid decoder, we have to create a "Null" decoder
    // that ignores all calls. The reason we can get into this state is that the
    // old decoder factory interface doesn't have a way to query supported
    // codecs.
    if (!video_decoder) {
      video_decoder = std::make_unique<NullVideoDecoder>();
    }

    std::string decoded_output_file =
        field_trial::FindFullName("WebRTC-DecoderDataDumpDirectory");
    // Because '/' can't be used inside a field trial parameter, we use ';'
    // instead.
    // This is only relevant to WebRTC-DecoderDataDumpDirectory
    // field trial. ';' is chosen arbitrary. Even though it's a legal character
    // in some file systems, we can sacrifice ability to use it in the path to
    // dumped video, since it's developers-only feature for debugging.
    absl::c_replace(decoded_output_file, ';', '/');
    if (!decoded_output_file.empty()) {
      char filename_buffer[256];
      rtc::SimpleStringBuilder ssb(filename_buffer);
      ssb << decoded_output_file << "/webrtc_receive_stream_"
          << this->config_.rtp.remote_ssrc << "-" << rtc::TimeMicros()
          << ".ivf";
      video_decoder = CreateFrameDumpingDecoderWrapper(
          std::move(video_decoder), FileWrapper::OpenWriteOnly(ssb.str()));
    }

    video_decoders_.push_back(std::move(video_decoder));

    video_receiver_.RegisterExternalDecoder(video_decoders_.back().get(),// 设置解码器
                                            decoder.payload_type);
    VideoCodec codec = CreateDecoderVideoCodec(decoder);//注意这里

    const bool raw_payload =
        config_.rtp.raw_payload_types.count(codec.plType) > 0;
    rtp_video_stream_receiver_.AddReceiveCodec(
        codec, decoder.video_format.parameters, raw_payload);
    RTC_CHECK_EQ(VCM_OK, video_receiver_.RegisterReceiveCodec(
                             &codec, num_cpu_cores_, false));
  }

  RTC_DCHECK(renderer != nullptr);
  video_stream_decoder_.reset(
      new VideoStreamDecoder(&video_receiver_, &stats_proxy_, renderer)); // 创建 VideoStreamDecoder，将 VideoReceiveStream 中的成员变量 VideoReceiver2 video_receiver_ 的指针传递进来 

  // Make sure we register as a stats observer *after* we've prepared the
  // |video_stream_decoder_|.
  call_stats_->RegisterStatsObserver(this);

  // Start decoding on task queue.
  video_receiver_.DecoderThreadStarting(); // VideoReceiver2 video_receiver_; 
  stats_proxy_.DecoderThreadStarting();
  decode_queue_.PostTask([this] {
    RTC_DCHECK_RUN_ON(&decode_queue_);
    decoder_stopped_ = false;
    StartNextDecode(); //在事件循环中不停的执行
  });
  decoder_running_ = true;
  rtp_video_stream_receiver_.StartReceive(); //注意这里 
}


        std::unique_ptr<VideoDecoder> VideoDecoderFactory::LegacyCreateVideoDecoder(
            const SdpVideoFormat& format,
            const std::string& receive_stream_id) {
          return CreateVideoDecoder(format); // 多态
        }

        std::unique_ptr<VideoDecoder> InternalDecoderFactory::CreateVideoDecoder(
            const SdpVideoFormat& format) {
          if (!IsFormatSupported(GetSupportedFormats(), format)) {
            RTC_LOG(LS_ERROR) << "Trying to create decoder for unsupported format";
            return nullptr;
          }

          if (absl::EqualsIgnoreCase(format.name, cricket::kVp8CodecName))
            return VP8Decoder::Create(); //注意这里
          if (absl::EqualsIgnoreCase(format.name, cricket::kVp9CodecName))
            return VP9Decoder::Create(); //注意这里
          if (absl::EqualsIgnoreCase(format.name, cricket::kH264CodecName))
            return H264Decoder::Create(); //注意这里
          RTC_NOTREACHED();
          return nullptr;
        }



        VideoCodec CreateDecoderVideoCodec(const VideoReceiveStream::Decoder& decoder) {
          VideoCodec codec;
          memset(&codec, 0, sizeof(codec));

          codec.plType = decoder.payload_type;
          codec.codecType = PayloadStringToCodecType(decoder.video_format.name);

          if (codec.codecType == kVideoCodecVP8) {
            *(codec.VP8()) = VideoEncoder::GetDefaultVp8Settings();
          } else if (codec.codecType == kVideoCodecVP9) {
            *(codec.VP9()) = VideoEncoder::GetDefaultVp9Settings();
          } else if (codec.codecType == kVideoCodecH264) {
            *(codec.H264()) = VideoEncoder::GetDefaultH264Settings(); //注意这里
          } else if (codec.codecType == kVideoCodecMultiplex) {
            VideoReceiveStream::Decoder associated_decoder = decoder;
            associated_decoder.video_format =
                SdpVideoFormat(CodecTypeToPayloadString(kVideoCodecVP9));
            VideoCodec associated_codec = CreateDecoderVideoCodec(associated_decoder);
            associated_codec.codecType = kVideoCodecMultiplex;
            return associated_codec;
          }

          codec.width = 320;
          codec.height = 180;
          const int kDefaultStartBitrate = 300;
          codec.startBitrate = codec.minBitrate = codec.maxBitrate =
              kDefaultStartBitrate;

          return codec;
        }

        // 一些设置 
        VideoStreamDecoder::VideoStreamDecoder(
            VideoReceiver2* video_receiver,
            ReceiveStatisticsProxy* receive_statistics_proxy,
            rtc::VideoSinkInterface<VideoFrame>* incoming_video_stream)
            : video_receiver_(video_receiver),
              receive_stats_callback_(receive_statistics_proxy),
              incoming_video_stream_(incoming_video_stream) {
          RTC_DCHECK(video_receiver_);

          video_receiver_->RegisterReceiveCallback(this); //注意这里 
        }


        int32_t VideoReceiver2::RegisterReceiveCallback(
            VCMReceiveCallback* receiveCallback) {
          RTC_DCHECK_RUN_ON(&construction_thread_checker_);
          RTC_DCHECK(!IsDecoderThreadRunning());
          // This value is set before the decoder thread starts and unset after
          // the decoder thread has been stopped.
          decodedFrameCallback_.SetUserReceiveCallback(receiveCallback); //注意这里 
          return VCM_OK;
        }


        void VCMDecodedFrameCallback::SetUserReceiveCallback(
            VCMReceiveCallback* receiveCallback) {
          RTC_DCHECK(construction_thread_.IsCurrent());
          RTC_DCHECK((!_receiveCallback && receiveCallback) ||
                     (_receiveCallback && !receiveCallback));
          _receiveCallback = receiveCallback; //实际上指向的就是 webrtc::VideoStreamDecoder 
        }



void VideoReceiveStream::StartNextDecode() {
  TRACE_EVENT0("webrtc", "VideoReceiveStream::StartNextDecode");
  frame_buffer_->NextFrame( //不停的获取frame
      GetWaitMs(), keyframe_required_, &decode_queue_,
      /* encoded frame handler */
      [this](std::unique_ptr<EncodedFrame> frame, ReturnReason res) {
        RTC_DCHECK_EQ(frame == nullptr, res == ReturnReason::kTimeout);
        RTC_DCHECK_EQ(frame != nullptr, res == ReturnReason::kFrameFound);
        decode_queue_.PostTask([this, frame = std::move(frame)]() mutable {//将取出的frame再次入队进行处理
          RTC_DCHECK_RUN_ON(&decode_queue_);
          if (decoder_stopped_)
            return;
          if (frame) {
            HandleEncodedFrame(std::move(frame)); // 注意这里
          } else {
            HandleFrameBufferTimeout();
          }
          StartNextDecode();
        });
      });
}


void VideoReceiveStream::HandleEncodedFrame(
    std::unique_ptr<EncodedFrame> frame) {
  int64_t now_ms = clock_->TimeInMilliseconds();

  // Current OnPreDecode only cares about QP for VP8.
  int qp = -1;
  if (frame->CodecSpecific()->codecType == kVideoCodecVP8) {
    if (!vp8::GetQp(frame->data(), frame->size(), &qp)) {
      RTC_LOG(LS_WARNING) << "Failed to extract QP from VP8 video frame";
    }
  }
  stats_proxy_.OnPreDecode(frame->CodecSpecific()->codecType, qp);

  int decode_result = video_receiver_.Decode(frame.get());//注意这里 VideoReceiver2::Decode
  if (decode_result == WEBRTC_VIDEO_CODEC_OK ||
      decode_result == WEBRTC_VIDEO_CODEC_OK_REQUEST_KEYFRAME) {
    keyframe_required_ = false;
    frame_decoded_ = true;
    rtp_video_stream_receiver_.FrameDecoded(frame->id.picture_id);

    if (decode_result == WEBRTC_VIDEO_CODEC_OK_REQUEST_KEYFRAME)
      RequestKeyFrame();
  } else if (!frame_decoded_ || !keyframe_required_ ||
             (last_keyframe_request_ms_ + max_wait_for_keyframe_ms_ < now_ms)) {
    keyframe_required_ = true;
    // TODO(philipel): Remove this keyframe request when downstream project
    //                 has been fixed.
    RequestKeyFrame();
    last_keyframe_request_ms_ = now_ms;
  }
}


int32_t VideoReceiver2::Decode(const VCMEncodedFrame* frame) {
  RTC_DCHECK_RUN_ON(&decoder_thread_checker_);
  TRACE_EVENT0("webrtc", "VideoReceiver2::Decode");
  // Change decoder if payload type has changed
  VCMGenericDecoder* decoder =
      codecDataBase_.GetDecoder(*frame, &decodedFrameCallback_); //注意这里
  if (decoder == nullptr) {
    return VCM_NO_CODEC_REGISTERED;
  }
  return decoder->Decode(*frame, clock_->TimeInMilliseconds()); //注意这里 VCMGenericDecoder::Decode
}


            VCMGenericDecoder* VCMDecoderDataBase::GetDecoder(
                const VCMEncodedFrame& frame,
                VCMDecodedFrameCallback* decoded_frame_callback) {
              RTC_DCHECK(decoded_frame_callback->UserReceiveCallback());
              uint8_t payload_type = frame.PayloadType();
              if (payload_type == receive_codec_.plType || payload_type == 0) {
                return ptr_decoder_.get();
              }
              // If decoder exists - delete.
              if (ptr_decoder_) {
                ptr_decoder_.reset();
                memset(&receive_codec_, 0, sizeof(VideoCodec));
              }
              ptr_decoder_ = CreateAndInitDecoder(frame, &receive_codec_); //注意这里
              if (!ptr_decoder_) {
                return nullptr;
              }
              VCMReceiveCallback* callback = decoded_frame_callback->UserReceiveCallback();
              callback->OnIncomingPayloadType(receive_codec_.plType); //注意这里
              if (ptr_decoder_->RegisterDecodeCompleteCallback(decoded_frame_callback) < //注意这里
                  0) {
                ptr_decoder_.reset();
                memset(&receive_codec_, 0, sizeof(VideoCodec));
                return nullptr;
              }
              return ptr_decoder_.get();
            }


          std::unique_ptr<VCMGenericDecoder> VCMDecoderDataBase::CreateAndInitDecoder(
              const VCMEncodedFrame& frame,
              VideoCodec* new_codec) const {
            uint8_t payload_type = frame.PayloadType();
            RTC_LOG(LS_INFO) << "Initializing decoder with payload type '"
                             << static_cast<int>(payload_type) << "'.";
            RTC_DCHECK(new_codec);
            const VCMDecoderMapItem* decoder_item = FindDecoderItem(payload_type);
            if (!decoder_item) {
              RTC_LOG(LS_ERROR) << "Can't find a decoder associated with payload type: "
                                << static_cast<int>(payload_type);
              return nullptr;
            }
            std::unique_ptr<VCMGenericDecoder> ptr_decoder;
            const VCMExtDecoderMapItem* external_dec_item =
                FindExternalDecoderItem(payload_type);
            if (external_dec_item) {
              // External codec.
              ptr_decoder.reset(new VCMGenericDecoder(
                  external_dec_item->external_decoder_instance, true)); // 将 external_dec_item->external_decoder_instance 传递到 VCMGenericDecoder 中的 std::unique_ptr<VideoDecoder> decoder_ 成员变量中，external_dec_item->external_decoder_instance 可以是webrtc::LibvpxVp8Decoder、webrtc::VP9DecoderImpl、webrtc::H264DecoderImpl
            } else {
              RTC_LOG(LS_ERROR) << "No decoder of this type exists.";
            }
            if (!ptr_decoder)
              return nullptr;

            // Copy over input resolutions to prevent codec reinitialization due to
            // the first frame being of a different resolution than the database values.
            // This is best effort, since there's no guarantee that width/height have been
            // parsed yet (and may be zero).
            if (frame.EncodedImage()._encodedWidth > 0 &&
                frame.EncodedImage()._encodedHeight > 0) {
              decoder_item->settings->width = frame.EncodedImage()._encodedWidth;
              decoder_item->settings->height = frame.EncodedImage()._encodedHeight;
            }
            if (ptr_decoder->InitDecode(decoder_item->settings.get(), // VCMGenericDecoder::InitDecode 里面会有进一步的多态操作 decoder_->InitDecode(settings, numberOfCores)
                                        decoder_item->number_of_cores) < 0) {
              return nullptr;
            }
            memcpy(new_codec, decoder_item->settings.get(), sizeof(VideoCodec));
            return ptr_decoder;
          }


int32_t VCMGenericDecoder::Decode(const VCMEncodedFrame& frame, int64_t nowMs) {
  TRACE_EVENT1("webrtc", "VCMGenericDecoder::Decode", "timestamp",
               frame.Timestamp());
  _frameInfos[_nextFrameInfoIdx].decodeStartTimeMs = nowMs;
  _frameInfos[_nextFrameInfoIdx].renderTimeMs = frame.RenderTimeMs();
  _frameInfos[_nextFrameInfoIdx].rotation = frame.rotation();
  _frameInfos[_nextFrameInfoIdx].timing = frame.video_timing();
  _frameInfos[_nextFrameInfoIdx].ntp_time_ms =
      frame.EncodedImage().ntp_time_ms_;
  _frameInfos[_nextFrameInfoIdx].packet_infos = frame.PacketInfos();

  // Set correctly only for key frames. Thus, use latest key frame
  // content type. If the corresponding key frame was lost, decode will fail
  // and content type will be ignored.
  if (frame.FrameType() == VideoFrameType::kVideoFrameKey) {
    _frameInfos[_nextFrameInfoIdx].content_type = frame.contentType();
    _last_keyframe_content_type = frame.contentType();
  } else {
    _frameInfos[_nextFrameInfoIdx].content_type = _last_keyframe_content_type;
  }
  _callback->Map(frame.Timestamp(), &_frameInfos[_nextFrameInfoIdx]);

  _nextFrameInfoIdx = (_nextFrameInfoIdx + 1) % kDecoderFrameMemoryLength;
  int32_t ret = decoder_->Decode(frame.EncodedImage(), frame.MissingFrame(), // decoder_ 是直接从构造函数的参数中传递进来的
                                 frame.RenderTimeMs());

  _callback->OnDecoderImplementationName(decoder_->ImplementationName()); // VCMDecodedFrameCallback::OnDecoderImplementationName
  if (ret < WEBRTC_VIDEO_CODEC_OK) {
    RTC_LOG(LS_WARNING) << "Failed to decode frame with timestamp "
                        << frame.Timestamp() << ", error code: " << ret;
    _callback->Pop(frame.Timestamp());
    return ret;
  } else if (ret == WEBRTC_VIDEO_CODEC_NO_OUTPUT) {
    // No output
    _callback->Pop(frame.Timestamp());
  }
  return ret;
}



//以VP8的解码为例
int LibvpxVp8Decoder::Decode(const EncodedImage& input_image,
                             bool missing_frames,
                             int64_t /*render_time_ms*/) {
  if (!inited_) {
    return WEBRTC_VIDEO_CODEC_UNINITIALIZED;
  }
  if (decode_complete_callback_ == NULL) {
    return WEBRTC_VIDEO_CODEC_UNINITIALIZED;
  }
  if (input_image.data() == NULL && input_image.size() > 0) {
    // Reset to avoid requesting key frames too often.
    if (propagation_cnt_ > 0)
      propagation_cnt_ = 0;
    return WEBRTC_VIDEO_CODEC_ERR_PARAMETER;
  }

// Post process configurations.
#if defined(WEBRTC_ARCH_ARM) || defined(WEBRTC_ARCH_ARM64) || \
    defined(WEBRTC_ANDROID)
  if (use_postproc_arm_) {
    vp8_postproc_cfg_t ppcfg;
    ppcfg.post_proc_flag = VP8_MFQE;
    // For low resolutions, use stronger deblocking filter.
    int last_width_x_height = last_frame_width_ * last_frame_height_;
    if (last_width_x_height > 0 && last_width_x_height <= 320 * 240) {
      // Enable the deblock and demacroblocker based on qp thresholds.
      RTC_DCHECK(qp_smoother_);
      int qp = qp_smoother_->GetAvg();
      if (qp > deblock_.min_qp) {
        int level = deblock_.max_level;
        if (qp < deblock_.degrade_qp) {
          // Use lower level.
          level = deblock_.max_level * (qp - deblock_.min_qp) /
                  (deblock_.degrade_qp - deblock_.min_qp);
        }
        // Deblocking level only affects VP8_DEMACROBLOCK.
        ppcfg.deblocking_level = std::max(level, 1);
        ppcfg.post_proc_flag |= VP8_DEBLOCK | VP8_DEMACROBLOCK;
      }
    }
    vpx_codec_control(decoder_, VP8_SET_POSTPROC, &ppcfg);
  }
#else
  vp8_postproc_cfg_t ppcfg;
  // MFQE enabled to reduce key frame popping.
  ppcfg.post_proc_flag = VP8_MFQE | VP8_DEBLOCK;
  // For VGA resolutions and lower, enable the demacroblocker postproc.
  if (last_frame_width_ * last_frame_height_ <= 640 * 360) {
    ppcfg.post_proc_flag |= VP8_DEMACROBLOCK;
  }
  // Strength of deblocking filter. Valid range:[0,16]
  ppcfg.deblocking_level = 3;
  vpx_codec_control(decoder_, VP8_SET_POSTPROC, &ppcfg);
#endif

  // Always start with a complete key frame.
  if (key_frame_required_) {
    if (input_image._frameType != VideoFrameType::kVideoFrameKey)
      return WEBRTC_VIDEO_CODEC_ERROR;
    // We have a key frame - is it complete?
    if (input_image._completeFrame) {
      key_frame_required_ = false;
    } else {
      return WEBRTC_VIDEO_CODEC_ERROR;
    }
  }
  // Restrict error propagation using key frame requests.
  // Reset on a key frame refresh.
  if (input_image._frameType == VideoFrameType::kVideoFrameKey &&
      input_image._completeFrame) {
    propagation_cnt_ = -1;
    // Start count on first loss.
  } else if ((!input_image._completeFrame || missing_frames) &&
             propagation_cnt_ == -1) {
    propagation_cnt_ = 0;
  }
  if (propagation_cnt_ >= 0) {
    propagation_cnt_++;
  }

  vpx_codec_iter_t iter = NULL;
  vpx_image_t* img;
  int ret;

  // Check for missing frames.
  if (missing_frames) {
    // Call decoder with zero data length to signal missing frames.
    if (vpx_codec_decode(decoder_, NULL, 0, 0, kDecodeDeadlineRealtime)) {
      // Reset to avoid requesting key frames too often.
      if (propagation_cnt_ > 0)
        propagation_cnt_ = 0;
      return WEBRTC_VIDEO_CODEC_ERROR;
    }
    img = vpx_codec_get_frame(decoder_, &iter);
    iter = NULL;
  }

  const uint8_t* buffer = input_image.data();
  if (input_image.size() == 0) {
    buffer = NULL;  // Triggers full frame concealment.
  }
  if (vpx_codec_decode(decoder_, buffer, input_image.size(), 0,
                       kDecodeDeadlineRealtime)) {
    // Reset to avoid requesting key frames too often.
    if (propagation_cnt_ > 0) {
      propagation_cnt_ = 0;
    }
    return WEBRTC_VIDEO_CODEC_ERROR;
  }

  img = vpx_codec_get_frame(decoder_, &iter);
  int qp;
  vpx_codec_err_t vpx_ret =
      vpx_codec_control(decoder_, VPXD_GET_LAST_QUANTIZER, &qp);
  RTC_DCHECK_EQ(vpx_ret, VPX_CODEC_OK);
  ret = ReturnFrame(img, input_image.Timestamp(), qp, input_image.ColorSpace()); //注意这里 
  if (ret != 0) {
    // Reset to avoid requesting key frames too often.
    if (ret < 0 && propagation_cnt_ > 0)
      propagation_cnt_ = 0;
    return ret;
  }
  // Check Vs. threshold
  if (propagation_cnt_ > kVp8ErrorPropagationTh) {
    // Reset to avoid requesting key frames too often.
    propagation_cnt_ = 0;
    return WEBRTC_VIDEO_CODEC_ERROR;
  }
  return WEBRTC_VIDEO_CODEC_OK;
}


int LibvpxVp8Decoder::ReturnFrame(
    const vpx_image_t* img,
    uint32_t timestamp,
    int qp,
    const webrtc::ColorSpace* explicit_color_space) {
  if (img == NULL) {
    // Decoder OK and NULL image => No show frame
    return WEBRTC_VIDEO_CODEC_NO_OUTPUT;
  }
  if (qp_smoother_) {
    if (last_frame_width_ != static_cast<int>(img->d_w) ||
        last_frame_height_ != static_cast<int>(img->d_h)) {
      qp_smoother_->Reset();
    }
    qp_smoother_->Add(qp);
  }
  last_frame_width_ = img->d_w;
  last_frame_height_ = img->d_h;
  // Allocate memory for decoded image.
  rtc::scoped_refptr<I420Buffer> buffer =
      buffer_pool_.CreateBuffer(img->d_w, img->d_h);
  if (!buffer.get()) {
    // Pool has too many pending frames.
    RTC_HISTOGRAM_BOOLEAN("WebRTC.Video.LibvpxVp8Decoder.TooManyPendingFrames",
                          1);
    return WEBRTC_VIDEO_CODEC_NO_OUTPUT;
  }

  libyuv::I420Copy(img->planes[VPX_PLANE_Y], img->stride[VPX_PLANE_Y],
                   img->planes[VPX_PLANE_U], img->stride[VPX_PLANE_U],
                   img->planes[VPX_PLANE_V], img->stride[VPX_PLANE_V],
                   buffer->MutableDataY(), buffer->StrideY(),
                   buffer->MutableDataU(), buffer->StrideU(),
                   buffer->MutableDataV(), buffer->StrideV(), img->d_w,
                   img->d_h);

  VideoFrame decoded_image = VideoFrame::Builder()
                                 .set_video_frame_buffer(buffer)
                                 .set_timestamp_rtp(timestamp)
                                 .set_color_space(explicit_color_space)
                                 .build();
  decode_complete_callback_->Decoded(decoded_image, absl::nullopt, qp); // decode_complete_callback_ 就是 webrtc::VideoReceiver2 成员变量 decodedFrameCallback_ 对象的地址

  return WEBRTC_VIDEO_CODEC_OK;
}


void VCMDecodedFrameCallback::Decoded(VideoFrame& decodedImage,
                                      absl::optional<int32_t> decode_time_ms,
                                      absl::optional<uint8_t> qp) {
  // Wait some extra time to simulate a slow decoder.
  if (_extra_decode_time) {
    rtc::Thread::SleepMs(_extra_decode_time->ms());
  }

  RTC_DCHECK(_receiveCallback) << "Callback must not be null at this point";
  TRACE_EVENT_INSTANT1("webrtc", "VCMDecodedFrameCallback::Decoded",
                       "timestamp", decodedImage.timestamp());
  // TODO(holmer): We should improve this so that we can handle multiple
  // callbacks from one call to Decode().
  VCMFrameInformation* frameInfo;
  {
    rtc::CritScope cs(&lock_);
    frameInfo = _timestampMap.Pop(decodedImage.timestamp());
  }

  if (frameInfo == NULL) {
    RTC_LOG(LS_WARNING) << "Too many frames backed up in the decoder, dropping "
                           "this one.";
    _receiveCallback->OnDroppedFrames(1);
    return;
  }

  decodedImage.set_ntp_time_ms(frameInfo->ntp_time_ms);
  decodedImage.set_packet_infos(frameInfo->packet_infos);
  decodedImage.set_rotation(frameInfo->rotation);

  const int64_t now_ms = _clock->TimeInMilliseconds();
  if (!decode_time_ms) {
    decode_time_ms = now_ms - frameInfo->decodeStartTimeMs;
  }
  _timing->StopDecodeTimer(*decode_time_ms, now_ms);

  // Report timing information.
  TimingFrameInfo timing_frame_info;
  if (frameInfo->timing.flags != VideoSendTiming::kInvalid) {
    int64_t capture_time_ms = decodedImage.ntp_time_ms() - ntp_offset_;
    // Convert remote timestamps to local time from ntp timestamps.
    frameInfo->timing.encode_start_ms -= ntp_offset_;
    frameInfo->timing.encode_finish_ms -= ntp_offset_;
    frameInfo->timing.packetization_finish_ms -= ntp_offset_;
    frameInfo->timing.pacer_exit_ms -= ntp_offset_;
    frameInfo->timing.network_timestamp_ms -= ntp_offset_;
    frameInfo->timing.network2_timestamp_ms -= ntp_offset_;

    int64_t sender_delta_ms = 0;
    if (decodedImage.ntp_time_ms() < 0) {
      // Sender clock is not estimated yet. Make sure that sender times are all
      // negative to indicate that. Yet they still should be relatively correct.
      sender_delta_ms =
          std::max({capture_time_ms, frameInfo->timing.encode_start_ms,
                    frameInfo->timing.encode_finish_ms,
                    frameInfo->timing.packetization_finish_ms,
                    frameInfo->timing.pacer_exit_ms,
                    frameInfo->timing.network_timestamp_ms,
                    frameInfo->timing.network2_timestamp_ms}) +
          1;
    }

    timing_frame_info.capture_time_ms = capture_time_ms - sender_delta_ms;
    timing_frame_info.encode_start_ms =
        frameInfo->timing.encode_start_ms - sender_delta_ms;
    timing_frame_info.encode_finish_ms =
        frameInfo->timing.encode_finish_ms - sender_delta_ms;
    timing_frame_info.packetization_finish_ms =
        frameInfo->timing.packetization_finish_ms - sender_delta_ms;
    timing_frame_info.pacer_exit_ms =
        frameInfo->timing.pacer_exit_ms - sender_delta_ms;
    timing_frame_info.network_timestamp_ms =
        frameInfo->timing.network_timestamp_ms - sender_delta_ms;
    timing_frame_info.network2_timestamp_ms =
        frameInfo->timing.network2_timestamp_ms - sender_delta_ms;
  }

  timing_frame_info.flags = frameInfo->timing.flags;
  timing_frame_info.decode_start_ms = frameInfo->decodeStartTimeMs;
  timing_frame_info.decode_finish_ms = now_ms;
  timing_frame_info.render_time_ms = frameInfo->renderTimeMs;
  timing_frame_info.rtp_timestamp = decodedImage.timestamp();
  timing_frame_info.receive_start_ms = frameInfo->timing.receive_start_ms;
  timing_frame_info.receive_finish_ms = frameInfo->timing.receive_finish_ms;
  _timing->SetTimingFrameInfo(timing_frame_info);

  decodedImage.set_timestamp_us(frameInfo->renderTimeMs *
                                rtc::kNumMicrosecsPerMillisec);
  _receiveCallback->FrameToRender(decodedImage, qp, *decode_time_ms, // _receiveCallback 就是 webrtc::VideoStreamDecoder 的指针
                                  frameInfo->content_type);
}


int32_t VideoStreamDecoder::FrameToRender(VideoFrame& video_frame,
                                          absl::optional<uint8_t> qp,
                                          int32_t decode_time_ms,
                                          VideoContentType content_type) {
  receive_stats_callback_->OnDecodedFrame(video_frame, qp, decode_time_ms, //
                                          content_type);
  incoming_video_stream_->OnFrame(video_frame); // 在 VideoReceiveStream::Start 中的分析可知，incoming_video_stream_ 实际上指向的是 IncomingVideoStream 
  return 0;
}


void IncomingVideoStream::OnFrame(const VideoFrame& video_frame) {
  TRACE_EVENT0("webrtc", "IncomingVideoStream::OnFrame");
  RTC_CHECK_RUNS_SERIALIZED(&decoder_race_checker_);
  RTC_DCHECK(!incoming_render_queue_.IsCurrent());
  // TODO(srte): Using video_frame = std::move(video_frame) would move the frame
  // into the lambda instead of copying it, but it doesn't work unless we change
  // OnFrame to take its frame argument by value instead of const reference.
  incoming_render_queue_.PostTask([this, video_frame = video_frame]() mutable { // 放到单独的线程中进行处理
    RTC_DCHECK(incoming_render_queue_.IsCurrent());
    if (render_buffers_.AddFrame(std::move(video_frame)) == 1)
      Dequeue(); //
  });
}



void IncomingVideoStream::Dequeue() {
  TRACE_EVENT0("webrtc", "IncomingVideoStream::Dequeue");
  RTC_DCHECK(incoming_render_queue_.IsCurrent());
  absl::optional<VideoFrame> frame_to_render = render_buffers_.FrameToRender();
  if (frame_to_render)
    callback_->OnFrame(*frame_to_render); // callback_ 实际指向的是 webrtc::internal::VideoReceiveStream

  if (render_buffers_.HasPendingFrames()) {
    uint32_t wait_time = render_buffers_.TimeToNextFrameRelease();
    incoming_render_queue_.PostDelayedTask([this]() { Dequeue(); }, wait_time);
  }
}

void VideoReceiveStream::OnFrame(const VideoFrame& video_frame) {
  int64_t sync_offset_ms;
  double estimated_freq_khz;
  // TODO(tommi): GetStreamSyncOffsetInMs grabs three locks.  One inside the
  // function itself, another in GetChannel() and a third in
  // GetPlayoutTimestamp.  Seems excessive.  Anyhow, I'm assuming the function
  // succeeds most of the time, which leads to grabbing a fourth lock.
  if (rtp_stream_sync_.GetStreamSyncOffsetInMs(
          video_frame.timestamp(), video_frame.render_time_ms(),
          &sync_offset_ms, &estimated_freq_khz)) {
    // TODO(tommi): OnSyncOffsetUpdated grabs a lock.
    stats_proxy_.OnSyncOffsetUpdated(sync_offset_ms, estimated_freq_khz);
  }
  source_tracker_.OnFrameDelivered(video_frame.packet_infos());

  config_.renderer->OnFrame(video_frame); // VideoReceiveStream 中的 config_ 来自 WebRtcVideoChannel::WebRtcVideoReceiveStream 中的 config_ 成员变量
                                        // config_.renderer 就是 WebRtcVideoChannel::WebRtcVideoReceiveStream 的 this 指针

  // TODO(tommi): OnRenderFrame grabs a lock too.
  stats_proxy_.OnRenderedFrame(video_frame);
}



void WebRtcVideoChannel::WebRtcVideoReceiveStream::OnFrame(
    const webrtc::VideoFrame& frame) {
  rtc::CritScope crit(&sink_lock_);

  int64_t time_now_ms = rtc::TimeMillis();
  if (first_frame_timestamp_ < 0)
    first_frame_timestamp_ = time_now_ms;
  int64_t elapsed_time_ms = time_now_ms - first_frame_timestamp_;
  if (frame.ntp_time_ms() > 0)
    estimated_remote_start_ntp_time_ms_ = frame.ntp_time_ms() - elapsed_time_ms;

  if (sink_ == NULL) {
    RTC_LOG(LS_WARNING) << "VideoReceiveStream not connected to a VideoSink.";
    return;
  }

  sink_->OnFrame(frame); //注意这里
}

        PeerConnection::ApplyRemoteDescription
        ===>
        transceiver->internal()->receiver_internal()->SetupMediaChannel(ssrc);// transceiver->internal() 返回的是指向 RtpTransceiver 的指针
//RtpTransceiver::receiver_internal()返回的实际上就是 webrtc:::VideoRtpReceiver


        void VideoRtpReceiver::SetupMediaChannel(uint32_t ssrc) {
          if (!media_channel_) {
            RTC_LOG(LS_ERROR)
                << "VideoRtpReceiver::SetupMediaChannel: No video channel exists.";
          }
          RestartMediaChannel(ssrc); //注意这里
        }


        void VideoRtpReceiver::RestartMediaChannel(absl::optional<uint32_t> ssrc) {
          RTC_DCHECK(media_channel_);
          if (!stopped_ && ssrc_ == ssrc) {
            return;
          }
          if (!stopped_) {
            SetSink(nullptr);
          }
          stopped_ = false;
          ssrc_ = ssrc;
          SetSink(source_->sink()); //source_->sink() 就是 VideoRtpTrackSource::sink(),也就是设置的 VideoBroadcaster 指针

          // Attach any existing frame decryptor to the media channel.
          MaybeAttachFrameDecryptorToMediaChannel(
              ssrc, worker_thread_, frame_decryptor_, media_channel_, stopped_);
          // TODO(bugs.webrtc.org/8694): Stop using 0 to mean unsignalled SSRC
          // value.
          delay_->OnStart(media_channel_, ssrc.value_or(0));
        }


      bool VideoRtpReceiver::SetSink(rtc::VideoSinkInterface<VideoFrame>* sink) {
        RTC_DCHECK(media_channel_);
        RTC_DCHECK(!stopped_);
        return worker_thread_->Invoke<bool>(RTC_FROM_HERE, [&] {
          // TODO(bugs.webrtc.org/8694): Stop using 0 to mean unsignalled SSRC
          return media_channel_->SetSink(ssrc_.value_or(0), sink); //注意这里
        });
      }

      bool WebRtcVideoChannel::SetSink(
          uint32_t ssrc,
          rtc::VideoSinkInterface<webrtc::VideoFrame>* sink) {
        RTC_DCHECK_RUN_ON(&thread_checker_);
        RTC_LOG(LS_INFO) << "SetSink: ssrc:" << ssrc << " "
                         << (sink ? "(ptr)" : "nullptr");
        if (ssrc == 0) {
          default_unsignalled_ssrc_handler_.SetDefaultSink(this, sink);
          return true;
        }

        std::map<uint32_t, WebRtcVideoReceiveStream*>::iterator it =
            receive_streams_.find(ssrc); //注意这里
        if (it == receive_streams_.end()) {
          return false;
        }

        it->second->SetSink(sink); //注意这里
        return true;
      }

      void WebRtcVideoChannel::WebRtcVideoReceiveStream::SetSink(
          rtc::VideoSinkInterface<webrtc::VideoFrame>* sink) {
        rtc::CritScope crit(&sink_lock_);
        sink_ = sink; //注意这里
      }



void VideoBroadcaster::OnFrame(const webrtc::VideoFrame& frame) {
  rtc::CritScope cs(&sinks_and_wants_lock_);
  bool current_frame_was_discarded = false;
  for (auto& sink_pair : sink_pairs()) {
    if (sink_pair.wants.rotation_applied &&
        frame.rotation() != webrtc::kVideoRotation_0) {
      // Calls to OnFrame are not synchronized with changes to the sink wants.
      // When rotation_applied is set to true, one or a few frames may get here
      // with rotation still pending. Protect sinks that don't expect any
      // pending rotation.
      RTC_LOG(LS_VERBOSE) << "Discarding frame with unexpected rotation.";
      sink_pair.sink->OnDiscardedFrame();
      current_frame_was_discarded = true;
      continue;
    }
    if (sink_pair.wants.black_frames) {
      webrtc::VideoFrame black_frame =
          webrtc::VideoFrame::Builder()
              .set_video_frame_buffer(
                  GetBlackFrameBuffer(frame.width(), frame.height()))
              .set_rotation(frame.rotation())
              .set_timestamp_us(frame.timestamp_us())
              .set_id(frame.id())
              .build();
      sink_pair.sink->OnFrame(black_frame);
    } else if (!previous_frame_sent_to_all_sinks_) {
      // Since last frame was not sent to some sinks, full update is needed.
      webrtc::VideoFrame copy = frame;
      copy.set_update_rect(
          webrtc::VideoFrame::UpdateRect{0, 0, frame.width(), frame.height()});
      sink_pair.sink->OnFrame(copy);
    } else {
      sink_pair.sink->OnFrame(frame); //VideoRenderer::OnFrame
    }
  }
  previous_frame_sent_to_all_sinks_ = !current_frame_was_discarded;
}