A-B 1756-L73 具有兼容电源和机架中的一个空闲插槽

系统要求MVI46-PDPS模块至少需要以下硬件和软件组件：罗克韦尔自动化SLC 5/02 M0/M1处理器（或更新版本），具有兼容电源和机架中的一个空闲插槽，用于MVI46-PDPS单元该模块需要800mA的可用功率。罗克韦尔自动化RSLogix 500编程软件。罗克韦尔自动化RSLinx通信软件奔腾&#xAE；II最低500 MHz。奔腾III 733 MHz（或更好）推荐支持的操作系统：o Microsoft®Windows 98o Windows NT®（带有SP4或更高版本的版本4）o Windows 2000o Windows XP最低32 MB RAM，建议64 MB RAM50 MB的可用硬盘空间（或更多，具体取决于应用程序要求）

These sections are as follows: [Module] and [ASCII Port 2]. Items are contained in each section that define the configuration of the module. The parameters that can be defined for the module are shown in the following table:This is the Parity code to be used for the port. The values are as follows: None, Odd, Even, Mark and Space. Data Bits: 5 to 8 This parameter sets the number of data bits for each word used by the protocol. Valid entries for this field are 5, 6, 7 and 8. Stop Bits: 1 or 2 This parameter sets the number of stop bits to be used with each data value sent. Valid entries for this field are 1 and 2. RTS On: 0 to 65535 This parameter sets the number of milliseconds to delay after RTS is asserted before the data will be transmitted. Valid values are in the range of 0 to 65535.