使用 kubeadm 在 Ubuntu 20.04 上部署k8s集群

最新推荐文章于 2024-08-23 17:43:00 发布

FoolCarpe

最新推荐文章于 2024-08-23 17:43:00 发布

阅读量1.4k

点赞数

分类专栏： K8s kubernetes 文章标签： ubuntu kubernetes docker

本文链接：https://blog.csdn.net/hefashion0190/article/details/122635188

版权

K8s 同时被 2 个专栏收录

5 篇文章 0 订阅

订阅专栏

kubernetes

5 篇文章 0 订阅

订阅专栏

使用 kubeadm 在 Ubuntu 20.04 上部署k8s集群

Kubernetes 是一种用于在本地服务器或跨混合云环境中大规模编排和管理容器化应用程序的工具。

Kubeadm 是 Kubernetes 提供的一个工具，可帮助用户安装可用于生产的 Kubernetes 集群的最佳实践。

部署 `Kubernetes` 集群时使用了两种服务器类型

Master（主节点）

控制和管理一组工作节点（工作负载运行时）的节点。

主节点具有以下组件来帮助管理工作节点：
- Kube-APIServer
  
  主要实现是 kube-apiserver。 kube-apiserver 旨在水平扩展——也就是说，它通过部署更多实例来扩展。 s可以运行多个 kube-apiserver 实例并平衡这些实例之间的流量。
- Kube-Controller-Manager
  
  它为正在运行的集群运行一组控制器。
  
  从逻辑上讲，每个控制器都是一个单独的进程，但为了降低复杂性，它们都被编译成一个二进制文件并在一个进程中运行。
  
  其中一些控制器：
  - Node控制器：负责在节点宕机时进行通知和响应。
  - Job控制器：监视代表一次性任务的作业对象，然后创建 Pod 以运行这些任务以完成。
  - Endpoints控制器：填充 Endpoints 对象（即加入 Services & Pods）。
  - Service Account & Token 控制器：为新命名空间创建默认帐户和 API 访问令牌。
- Etcd
  
  是一个高可用键值存储，为 Kubernetes 提供后端数据库。
  
  它存储和复制整个 Kubernetes集群状态。它是用 Go 编写并使用 Raft 协议。
- Kube Scheduler
  
  监视没有分配节点的新创建的 Pod，并选择一个节点让它们运行。
  
  调度决策考虑的因素包括：独个和集合资源需求、硬件/软件/策略约束、亲和性和反亲和性规范、数据局部性、工作负载间干扰和截止日期等。
Node（工作节点）

维护运行的 pod 并提供 Kubernetes 运行环境。

可行配置的最低要求

内存：每台机器 2 GB 或更多 RAM（任何更少都会为您的应用程序留下很小的空间）。
CPU：2 个 CPU 或更多。

网络：集群中所有机器之间的完整网络连接（公共或专用网络都可以）。

其他：每个节点的唯一主机名、MAC 地址和 product_uuid。

交换分区：必须禁用才能使 kubelet 正常工作。

在 Ubuntu 20.04 上安装 Kubernetes 集群

示例中设置包含三台服务器（一个主节点、两个工作节点）。可以添加更多节点以适应所需的用例和负载，例如为高可用（HA）使用三个主节点。

类型	主机名	硬件参数	IP	交换分区	selinux
主节点	k8s-master01.test.com	4GB 内存, 2vcpus	192.168.1.140	禁用	禁用
工作节点	k8s-worker01.test.com	4GB 内存, 2vcpus	192.168.1.141	禁用	禁用
工作节点	k8s-worker02.test.com	4GB 内存, 2vcpus	192.168.1.142	禁用	禁用

防火墙配置

主节点

# enable ufw
sudo ufw enable
# shell
sudo ufw allow 22/tcp
# Kubernetes API server
sudo ufw allow 6443/tcp
# etcd server client API
sudo ufw allow 2379:2380/tcp
# Kubelet API	
sudo ufw allow 10250/tcp
# kube-scheduler
sudo ufw allow 20259/tcp
# kube-controller-manager
sudo ufw allow 10257/tcp

工作节点

# shell
sudo ufw allow 22/tcp
# Kubelet API	
sudo ufw allow 10250/tcp
# NodePort Services
sudo ufw allow 30000:32767/tcp

hosts配置

所有节点。

sudo tee -a /etc/hosts<<EOF
192.168.1.140 k8s-cluster.test.com
192.168.1.140 k8s-master-01 k8s-master-01.test.com
192.168.1.141 k8s-worker-01 k8s-worker-01.test.com
192.168.1.142 k8s-worker-02 k8s-worker-02.test.com
EOF

关闭selinux

所有节点。

sudo setenforce 0
sudo sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config
sudo sed -i 's#SELINUX=permissive#SELINUX=disabled#g' /etc/selinux/config

关闭交换分区

所有节点。

sudo sed -i 's/^\(.*swap.*\)$/#\1/g' /etc/fstab
sudo swapoff -a

安装 Kubernetes 服务器

所有节点。

预配要在 Ubuntu 20.04 上部署 Kubernetes 时使用的服务器。设置过程将根据使用的虚拟化或云环境而有所不同。

服务器准备就绪后，更新它们。

sudo apt update
sudo apt -y upgrade && sudo systemctl reboot

安装 kubelet、kubeadm 和 kubectl

sudo apt update
sudo apt -y install curl apt-transport-https
curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add -
echo "deb https://apt.kubernetes.io/ kubernetes-xenial main" | sudo tee /etc/apt/sources.list.d/kubernetes.list

sudo apt update
sudo apt -y install vim git curl wget kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl

国内

sudo apt update
sudo apt -y install curl apt-transport-https
curl -s https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | sudo apt-key add -
echo "deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main" | sudo tee /etc/apt/sources.list.d/kubernetes.list

sudo apt update
sudo apt -y install vim git wget
sudo apt -y install kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl

通过检查 kubectl 的版本来确认安装。

$ kubectl version --client && kubeadm version
Client Version: version.Info{Major:"1", Minor:"23", GitVersion:"v1.23.2", GitCommit:"9d142434e3af351a628bffee3939e64c681afa4d", GitTreeState:"clean", BuildDate:"2022-01-19T17:35:46Z", GoVersion:"go1.17.5", Compiler:"gc", Platform:"linux/amd64"}
kubeadm version: &version.Info{Major:"1", Minor:"23", GitVersion:"v1.23.2", GitCommit:"9d142434e3af351a628bffee3939e64c681afa4d", GitTreeState:"clean", BuildDate:"2022-01-19T17:34:34Z", GoVersion:"go1.17.5", Compiler:"gc", Platform:"linux/amd64"}

启用内核模块并配置 sysctl

# Enable kernel modules
sudo modprobe overlay
sudo modprobe br_netfilter

# Add some settings to sysctl
sudo tee /etc/sysctl.d/kubernetes.conf<<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF

# Reload sysctl
sudo sysctl --system

安装容器运行时

所有节点。

为了在 Pod 中运行容器，Kubernetes 使用容器运行时。支持的容器运行时有：

Docker（不推荐使用）
CRI-O
Containerd
其他

注意：必须选择一个运行时。

安装 Docker（不推荐）

# Add repo and Install packages
sudo apt update
sudo apt install -y curl gnupg2 software-properties-common apt-transport-https ca-certificates
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
sudo apt update
sudo apt install -y containerd.io docker-ce docker-ce-cli

# Create required directories
sudo mkdir -p /etc/systemd/system/docker.service.d

# Create daemon json config file
sudo tee /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2"
}
EOF

# Start and enable Services
sudo systemctl daemon-reload 
sudo systemctl restart docker
sudo systemctl enable docker

安装 CRI-O

# Ensure you load modules
sudo modprobe overlay
sudo modprobe br_netfilter

# Set up required sysctl params
sudo tee /etc/sysctl.d/kubernetes.conf<<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF

# Reload sysctl
sudo sysctl --system

# Add Cri-o repo
sudo su -
OS="xUbuntu_20.04"
VERSION=1.22
echo "deb https://download.opensuse.org/repositories/devel:/kubic:/libcontainers:/stable/$OS/ /" > /etc/apt/sources.list.d/devel:kubic:libcontainers:stable.list
echo "deb http://download.opensuse.org/repositories/devel:/kubic:/libcontainers:/stable:/cri-o:/$VERSION/$OS/ /" > /etc/apt/sources.list.d/devel:kubic:libcontainers:stable:cri-o:$VERSION.list
curl -L https://download.opensuse.org/repositories/devel:kubic:libcontainers:stable:cri-o:$VERSION/$OS/Release.key | apt-key add -
curl -L https://download.opensuse.org/repositories/devel:/kubic:/libcontainers:/stable/$OS/Release.key | apt-key add -

# Update CRI-O CIDR subnet
sudo sed -i 's/10.85.0.0/10.244.0.0/g' /etc/cni/net.d/100-crio-bridge.conf

# Install CRI-O
sudo apt update
sudo apt install cri-o cri-o-runc

# Start and enable Service
sudo systemctl daemon-reload
sudo systemctl restart crio
sudo systemctl enable crio
sudo systemctl status crio

安装 Containerd

# Configure persistent loading of modules
sudo tee /etc/modules-load.d/containerd.conf <<EOF
overlay
br_netfilter
EOF

# Load at runtime
sudo modprobe overlay
sudo modprobe br_netfilter

# Ensure sysctl params are set
sudo tee /etc/sysctl.d/kubernetes.conf<<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOF

# Reload configs
sudo sysctl --system

# Install required packages
sudo apt install -y curl gnupg2 software-properties-common apt-transport-https ca-certificates

# Add Docker repo
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"

# Install containerd
sudo apt update
sudo apt install -y containerd.io

# Configure containerd and start service
sudo su -
mkdir -p /etc/containerd
containerd config default>/etc/containerd/config.toml
# Change image repository
sed -i 's/k8s.gcr.io/registry.aliyuncs.com\/google_containers/g' /etc/containerd/config.toml

# restart containerd
systemctl restart containerd
systemctl enable containerd
systemctl status  containerd

要使用 systemd cgroup 驱动程序，需要在 /etc/containerd/config.toml 中设置：

...
        [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc]
          ...
          [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]
            SystemdCgroup = true

调整sandbox_image镜像地址：

sudo sed -i 's/k8s.gcr.io/registry.aliyuncs.com\/google_containers/g' /etc/containerd/config.toml

[plugins."io.containerd.grpc.v1.cri"]
    ...
    sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.2"

初始化主节点

仅一个主节点。

登录到要用作主服务器的服务器，并确保加载了 br_netfilter 模块：

$ lsmod | grep br_netfilter
br_netfilter           28672  0
bridge                176128  1 br_netfilter

启用 kubelet 服务。

sudo systemctl enable kubelet

这些是用于引导集群的基本 kubeadm init 选项。

--control-plane-endpoint : 值可以为DNS(推荐)或者IP, 为所有`control-plane`节点设置共享端点
--pod-network-cidr : 用于设置 Pod 网络CIDR
--cri-socket : 如果有多个容器运行时用于设置运行时套接字路径
--apiserver-advertise-address : Set advertise address for this particular control-plane node's API server

配置–image-repository

registry.aliyuncs.com/google_containers

使用IP

要在不使用 DNS的情况下引导集群，请运行：

sudo kubeadm init  \
    --pod-network-cidr=10.244.0.0/16 \
    --image-repository=registry.aliyuncs.com/google_containers

使用DNS

设置集群端点 DNS 名称或将记录添加到 /etc/hosts 文件。

$ sudo cat /etc/hosts | grep k8s-cluster
192.168.1.140   k8s-cluster.test.com

创建集群：

sudo kubeadm init \
  --pod-network-cidr=10.244.0.0/16 \
  --upload-certs \
  --control-plane-endpoint=k8s-cluster.test.com \
  --image-repository=registry.aliyuncs.com/google_containers \
  --v 5

注意：如果 10.244.0.0/16 已在网络中使用，必须选择不同的 pod 网络 CIDR，替换上述命令中的 10.244.0.0/16。

容器运行时套接字:

运行时	Unix 域套接字的路径
Docker	`/var/run/docker.sock`
containerd	`unix:///run/containerd/containerd.sock`
CRI-O	`/var/run/crio/crio.sock`

选择不同的运行时传递相应的 Socket 文件

# CRI-O
sudo kubeadm init \
  --pod-network-cidr=10.244.0.0/16 \
  --cri-socket /var/run/crio/crio.sock \
  --upload-certs \
  --control-plane-endpoint=k8s-cluster.test.com \
  --image-repository=registry.aliyuncs.com/google_containers \
  --v 5

# Containerd
sudo kubeadm init \
  --pod-network-cidr=10.244.0.0/16 \
  --cri-socket unix:///run/containerd/containerd.sock \
  --upload-certs \
  --control-plane-endpoint=k8s-cluster.test.com \
  --image-repository=registry.aliyuncs.com/google_containers \
  --v 5

# Docker
sudo kubeadm init \
  --pod-network-cidr=10.244.0.0/16 \
  --cri-socket /var/run/docker.sock \
  --upload-certs \
  --control-plane-endpoint=k8s-cluster.test.com \
  --image-repository=registry.aliyuncs.com/google_containers\
  --v 5

这是初始化命令的输出：

I0122 01:50:55.159413   10000 interface.go:432] Looking for default routes with IPv4 addresses
I0122 01:50:55.159442   10000 interface.go:437] Default route transits interface "ens160"
I0122 01:50:55.159526   10000 interface.go:209] Interface ens160 is up
I0122 01:50:55.159569   10000 interface.go:257] Interface "ens160" has 2 addresses :[192.168.1.140/24 fe80::20c:29ff:fec7:93d7/64].
I0122 01:50:55.159583   10000 interface.go:224] Checking addr  192.168.1.140/24.
I0122 01:50:55.159590   10000 interface.go:231] IP found 192.168.1.140
I0122 01:50:55.159597   10000 interface.go:263] Found valid IPv4 address 192.168.1.140 for interface "ens160".
I0122 01:50:55.159605   10000 interface.go:443] Found active IP 192.168.1.140 
I0122 01:50:55.159627   10000 kubelet.go:217] the value of KubeletConfiguration.cgroupDriver is empty; setting it to "systemd"
I0122 01:50:55.163037   10000 version.go:186] fetching Kubernetes version from URL: https://dl.k8s.io/release/stable-1.txt
[init] Using Kubernetes version: v1.23.2
[preflight] Running pre-flight checks
I0122 01:50:55.866075   10000 checks.go:578] validating Kubernetes and kubeadm version
I0122 01:50:55.866101   10000 checks.go:171] validating if the firewall is enabled and active
I0122 01:50:55.872657   10000 checks.go:206] validating availability of port 6443
I0122 01:50:55.872859   10000 checks.go:206] validating availability of port 10259
I0122 01:50:55.872894   10000 checks.go:206] validating availability of port 10257
I0122 01:50:55.872914   10000 checks.go:283] validating the existence of file /etc/kubernetes/manifests/kube-apiserver.yaml
I0122 01:50:55.873551   10000 checks.go:283] validating the existence of file /etc/kubernetes/manifests/kube-controller-manager.yaml
I0122 01:50:55.873569   10000 checks.go:283] validating the existence of file /etc/kubernetes/manifests/kube-scheduler.yaml
I0122 01:50:55.873576   10000 checks.go:283] validating the existence of file /etc/kubernetes/manifests/etcd.yaml
I0122 01:50:55.873591   10000 checks.go:433] validating if the connectivity type is via proxy or direct
I0122 01:50:55.873602   10000 checks.go:472] validating http connectivity to first IP address in the CIDR
I0122 01:50:55.873615   10000 checks.go:472] validating http connectivity to first IP address in the CIDR
I0122 01:50:55.873626   10000 checks.go:107] validating the container runtime
I0122 01:50:55.884878   10000 checks.go:373] validating the presence of executable crictl
I0122 01:50:55.884910   10000 checks.go:332] validating the contents of file /proc/sys/net/bridge/bridge-nf-call-iptables
I0122 01:50:55.884958   10000 checks.go:332] validating the contents of file /proc/sys/net/ipv4/ip_forward
I0122 01:50:55.884998   10000 checks.go:654] validating whether swap is enabled or not
I0122 01:50:55.885042   10000 checks.go:373] validating the presence of executable conntrack
I0122 01:50:55.885083   10000 checks.go:373] validating the presence of executable ip
I0122 01:50:55.885101   10000 checks.go:373] validating the presence of executable iptables
I0122 01:50:55.885125   10000 checks.go:373] validating the presence of executable mount
I0122 01:50:55.885147   10000 checks.go:373] validating the presence of executable nsenter
I0122 01:50:55.885190   10000 checks.go:373] validating the presence of executable ebtables
I0122 01:50:55.885217   10000 checks.go:373] validating the presence of executable ethtool
I0122 01:50:55.885244   10000 checks.go:373] validating the presence of executable socat
I0122 01:50:55.885266   10000 checks.go:373] validating the presence of executable tc
I0122 01:50:55.885291   10000 checks.go:373] validating the presence of executable touch
I0122 01:50:55.885308   10000 checks.go:521] running all checks
I0122 01:50:55.920330   10000 checks.go:404] checking whether the given node name is valid and reachable using net.LookupHost
I0122 01:50:55.920352   10000 checks.go:620] validating kubelet version
I0122 01:50:55.968410   10000 checks.go:133] validating if the "kubelet" service is enabled and active
I0122 01:50:56.238364   10000 checks.go:206] validating availability of port 10250
I0122 01:50:56.238418   10000 checks.go:206] validating availability of port 2379
I0122 01:50:56.238458   10000 checks.go:206] validating availability of port 2380
I0122 01:50:56.238488   10000 checks.go:246] validating the existence and emptiness of directory /var/lib/etcd
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
I0122 01:50:56.238579   10000 checks.go:842] using image pull policy: IfNotPresent
I0122 01:50:56.245826   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/kube-apiserver:v1.23.2
I0122 01:51:04.176003   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/kube-controller-manager:v1.23.2
I0122 01:51:10.314667   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/kube-scheduler:v1.23.2
I0122 01:51:15.237932   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/kube-proxy:v1.23.2
I0122 01:51:36.079396   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/pause:3.6
I0122 01:51:39.028988   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/etcd:3.5.1-0
I0122 01:51:54.522733   10000 checks.go:859] pulling: registry.aliyuncs.com/google_containers/coredns:v1.8.6
[certs] Using certificateDir folder "/etc/kubernetes/pki"
I0122 01:52:02.668843   10000 certs.go:112] creating a new certificate authority for ca
[certs] Generating "ca" certificate and key
I0122 01:52:02.820631   10000 certs.go:522] validating certificate period for ca certificate
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-cluster.test.com k8s-master-01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.1.140]
[certs] Generating "apiserver-kubelet-client" certificate and key
I0122 01:52:03.014451   10000 certs.go:112] creating a new certificate authority for front-proxy-ca
[certs] Generating "front-proxy-ca" certificate and key
I0122 01:52:03.396360   10000 certs.go:522] validating certificate period for front-proxy-ca certificate
[certs] Generating "front-proxy-client" certificate and key
I0122 01:52:03.680220   10000 certs.go:112] creating a new certificate authority for etcd-ca
[certs] Generating "etcd/ca" certificate and key
I0122 01:52:03.733405   10000 certs.go:522] validating certificate period for etcd/ca certificate
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master-01 localhost] and IPs [192.168.1.140 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master-01 localhost] and IPs [192.168.1.140 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
I0122 01:52:04.327233   10000 certs.go:78] creating new public/private key files for signing service account users
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
I0122 01:52:04.504514   10000 kubeconfig.go:103] creating kubeconfig file for admin.conf
[kubeconfig] Writing "admin.conf" kubeconfig file
I0122 01:52:04.790366   10000 kubeconfig.go:103] creating kubeconfig file for kubelet.conf
[kubeconfig] Writing "kubelet.conf" kubeconfig file
I0122 01:52:04.986690   10000 kubeconfig.go:103] creating kubeconfig file for controller-manager.conf
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
I0122 01:52:05.144057   10000 kubeconfig.go:103] creating kubeconfig file for scheduler.conf
[kubeconfig] Writing "scheduler.conf" kubeconfig file
I0122 01:52:05.275919   10000 kubelet.go:65] Stopping the kubelet
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
I0122 01:52:05.608326   10000 manifests.go:99] [control-plane] getting StaticPodSpecs
I0122 01:52:05.608571   10000 certs.go:522] validating certificate period for CA certificate
I0122 01:52:05.608640   10000 manifests.go:125] [control-plane] adding volume "ca-certs" for component "kube-apiserver"
I0122 01:52:05.608648   10000 manifests.go:125] [control-plane] adding volume "etc-ca-certificates" for component "kube-apiserver"
I0122 01:52:05.608653   10000 manifests.go:125] [control-plane] adding volume "etc-pki" for component "kube-apiserver"
I0122 01:52:05.608658   10000 manifests.go:125] [control-plane] adding volume "k8s-certs" for component "kube-apiserver"
I0122 01:52:05.608663   10000 manifests.go:125] [control-plane] adding volume "usr-local-share-ca-certificates" for component "kube-apiserver"
I0122 01:52:05.608669   10000 manifests.go:125] [control-plane] adding volume "usr-share-ca-certificates" for component "kube-apiserver"
I0122 01:52:05.611113   10000 manifests.go:154] [control-plane] wrote static Pod manifest for component "kube-apiserver" to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
I0122 01:52:05.611126   10000 manifests.go:99] [control-plane] getting StaticPodSpecs
I0122 01:52:05.611305   10000 manifests.go:125] [control-plane] adding volume "ca-certs" for component "kube-controller-manager"
I0122 01:52:05.611314   10000 manifests.go:125] [control-plane] adding volume "etc-ca-certificates" for component "kube-controller-manager"
I0122 01:52:05.611321   10000 manifests.go:125] [control-plane] adding volume "etc-pki" for component "kube-controller-manager"
I0122 01:52:05.611326   10000 manifests.go:125] [control-plane] adding volume "flexvolume-dir" for component "kube-controller-manager"
I0122 01:52:05.611331   10000 manifests.go:125] [control-plane] adding volume "k8s-certs" for component "kube-controller-manager"
I0122 01:52:05.611336   10000 manifests.go:125] [control-plane] adding volume "kubeconfig" for component "kube-controller-manager"
I0122 01:52:05.611341   10000 manifests.go:125] [control-plane] adding volume "usr-local-share-ca-certificates" for component "kube-controller-manager"
I0122 01:52:05.611346   10000 manifests.go:125] [control-plane] adding volume "usr-share-ca-certificates" for component "kube-controller-manager"
I0122 01:52:05.612064   10000 manifests.go:154] [control-plane] wrote static Pod manifest for component "kube-controller-manager" to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[control-plane] Creating static Pod manifest for "kube-scheduler"
I0122 01:52:05.612076   10000 manifests.go:99] [control-plane] getting StaticPodSpecs
I0122 01:52:05.612259   10000 manifests.go:125] [control-plane] adding volume "kubeconfig" for component "kube-scheduler"
I0122 01:52:05.612747   10000 manifests.go:154] [control-plane] wrote static Pod manifest for component "kube-scheduler" to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
I0122 01:52:05.613477   10000 local.go:65] [etcd] wrote Static Pod manifest for a local etcd member to "/etc/kubernetes/manifests/etcd.yaml"
I0122 01:52:05.613514   10000 waitcontrolplane.go:91] [wait-control-plane] Waiting for the API server to be healthy
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[kubelet-check] Initial timeout of 40s passed.
[apiclient] All control plane components are healthy after 41.527549 seconds
I0122 01:52:47.142223   10000 uploadconfig.go:110] [upload-config] Uploading the kubeadm ClusterConfiguration to a ConfigMap
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
I0122 01:52:47.191888   10000 uploadconfig.go:124] [upload-config] Uploading the kubelet component config to a ConfigMap
[kubelet] Creating a ConfigMap "kubelet-config-1.23" in namespace kube-system with the configuration for the kubelets in the cluster
NOTE: The "kubelet-config-1.23" naming of the kubelet ConfigMap is deprecated. Once the UnversionedKubeletConfigMap feature gate graduates to Beta the default name will become just "kubelet-config". Kubeadm upgrade will handle this transition transparently.
I0122 01:52:47.216728   10000 uploadconfig.go:129] [upload-config] Preserving the CRISocket information for the control-plane node
I0122 01:52:47.216747   10000 patchnode.go:31] [patchnode] Uploading the CRI Socket information "unix:///run/containerd/containerd.sock" to the Node API object "k8s-master-01" as an annotation
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
[upload-certs] Using certificate key:
8e568ec9b181aace22496d3a1961d965179b65fb58567867fc498cfefbd0c4f0
[mark-control-plane] Marking the node k8s-master-01 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated) node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master-01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: bdqsdw.2uf50yfvo3uwy93w
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
I0122 01:52:48.826596   10000 clusterinfo.go:47] [bootstrap-token] loading admin kubeconfig
I0122 01:52:48.827103   10000 clusterinfo.go:58] [bootstrap-token] copying the cluster from admin.conf to the bootstrap kubeconfig
I0122 01:52:48.827341   10000 clusterinfo.go:70] [bootstrap-token] creating/updating ConfigMap in kube-public namespace
I0122 01:52:48.836154   10000 clusterinfo.go:84] creating the RBAC rules for exposing the cluster-info ConfigMap in the kube-public namespace
I0122 01:52:48.886003   10000 kubeletfinalize.go:90] [kubelet-finalize] Assuming that kubelet client certificate rotation is enabled: found "/var/lib/kubelet/pki/kubelet-client-current.pem"
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
I0122 01:52:48.886887   10000 kubeletfinalize.go:134] [kubelet-finalize] Restarting the kubelet to enable client certificate rotation
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join k8s-cluster.test.com:6443 --token bdqsdw.2uf50yfvo3uwy93w \
	--discovery-token-ca-cert-hash sha256:2a6f431cc99860ff6e15519e08e62f01b9b0cb051380031582bd5cc22efbc084 \
	--control-plane --certificate-key 8e568ec9b181aace22496d3a1961d965179b65fb58567867fc498cfefbd0c4f0

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join k8s-cluster.test.com:6443 --token bdqsdw.2uf50yfvo3uwy93w \
	--discovery-token-ca-cert-hash sha256:2a6f431cc99860ff6e15519e08e62f01b9b0cb051380031582bd5cc22efbc084

使用输出中的命令配置 kubectl

mkdir -p $HOME/.kube
sudo cp -f /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

检查集群状态

$ kubectl cluster-info

添加其他主节点

根据第一个主节点初始化运行结果中的命令，新增新的主节点。

kubeadm join k8s-cluster.test.com:6443 --token bdqsdw.2uf50yfvo3uwy93w \
	--discovery-token-ca-cert-hash sha256:2a6f431cc99860ff6e15519e08e62f01b9b0cb051380031582bd5cc22efbc084 \
	--control-plane --certificate-key 8e568ec9b181aace22496d3a1961d965179b65fb58567867fc498cfefbd0c4f0

mkdir -p $HOME/.kube
sudo cp -f /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

安装网络插件

仅主节点中的一个节点。

将使用 Calico。当然也可以选择任何其他支持的网络插件。

sudo kubectl create -f https://docs.projectcalico.org/manifests/tigera-operator.yaml
wget https://docs.projectcalico.org/manifests/custom-resources.yaml
sed -i 's/192.168.0.0/10.244.0.0/g' custom-resources.yaml
sudo kubectl create -f custom-resources.yaml

防火墙

所有节点。

sudo ufw allow 179/tcp
sudo ufw allow 5473/tcp
sudo ufw allow 4789/udp

添加工作节点

所有工作节点。

kubeadm join k8s-cluster.test.com:6443 --token bdqsdw.2uf50yfvo3uwy93w \
	--discovery-token-ca-cert-hash sha256:2a6f431cc99860ff6e15519e08e62f01b9b0cb051380031582bd5cc22efbc084

查看所有节点状态

任一主节点。

$ kubectl get nodes -A 
NAME            STATUS   ROLES                  AGE   VERSION
k8s-master-01   Ready    control-plane,master   74m   v1.23.2
k8s-worker-01   Ready    <none>                 22m   v1.23.2
k8s-worker-02   Ready    <none>                 14m   v1.23.2

在集群上部署应用程序

通过部署应用程序来验证集群是否正常工作。

kubectl apply -f https://k8s.io/examples/pods/commands.yaml

检查 pod 是否启动：

$ kubectl get pods 
NAME           READY   STATUS      RESTARTS   AGE
command-demo   0/1     Completed   0          64s

FoolCarpe

关注

0
点赞
踩
13

收藏

觉得还不错? 一键收藏
1
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫

专栏目录

使用 kubeadm 在 Ubuntu 20.04 上部署k8s集群

使用 kubeadm 在 Ubuntu 20.04 上部署k8s集群

部署 Kubernetes 集群时使用了两种服务器类型

可行配置的最低要求

在 Ubuntu 20.04 上安装 Kubernetes 集群

防火墙配置

主节点

工作节点

hosts配置

关闭selinux

关闭交换分区

安装 Kubernetes 服务器

安装 kubelet、kubeadm 和 kubectl

启用内核模块并配置 sysctl

安装容器运行时

安装 Docker（不推荐）

安装 CRI-O

安装 Containerd

初始化主节点

配置–image-repository

使用IP

使用DNS

选择不同的运行时传递相应的 Socket 文件

使用输出中的命令配置 kubectl

检查集群状态

添加其他主节点

安装网络插件

防火墙

添加工作节点

查看所有节点状态

在集群上部署应用程序

部署 `Kubernetes` 集群时使用了两种服务器类型