二分法查找其实就是折半查找,一种效率较高的查找方法。针对有需数组来查找的。
主要思想是:(设查找的数组期间为array[low, high])
(1)确定该期间的中间位置K
(2)将查找的值T与array[k]比较。若相等,查找成功返回此位置;否则确定新的查找区域,继续二分查找。区域确定如下:
a.array[k]>T 由数组的有序性可知array[k,k+1,……,high]>T;故新的区间为array[low,……,K-1]
b.array[k]<T 类似上面查找区间为array[k+1,……,high]。每一次查找与中间值比较,可以确定是否查找成功,不成功当前查找区间缩小一半。递归找,即可。
时间复杂度:O(log2n);
代码实现:
/// <summary>
/// 二分法查找
/// </summary>
/// <param name="array">目标数组(已经排序好了)</param>
/// <param name="a">查找的数</param>
/// <returns>目标数的索引</returns>
public int BinarySearch(int[] array, int T)
{
int low, high, mid;
low = 0;
high = array.Length - 1;
while (low <= high)
{
mid = (low + high) / 2;
if (array[mid] < T)
{
low = mid + 1;
}
else if (array[mid]>T)
{
high = mid - 1;
}
else
{
return mid;
}
}
return -1;
}
(二)快速排序算法
快速排序是尽量避免额外计算的极好例子.其工作方式是在数组中划分出小的和大的元素
基本思想是:
从数组中取出一个元素作为基准值
把其他元素分为两组:
“小的”是那些小于基准值的元素。
“大的”是那些大于基准值的元素,
递归对这两个组做排序。
快速排序快速的原因在于:一旦知道了某个元素比基准值小,它就不需要在与那些大的元素比较。而大的元素也不需要在与小的元素比较,这个性质使快速排序比简单排序、冒泡排序快的多。
时间复杂度:O(nlogn)
代码实现:
/// <summary>
/// 快速排序
/// </summary>
/// <param name="array"></param>
/// <param name="left"></param>
/// <param name="right"></param>
public void QuickSort(int[] array,int left,int right)
{
int last;
if (left>=right)
return;
int rand = (left+right)/2;
Swap(array, left, rand);
last = left;
for (int i = left + 1; i <= right; i++)
{
if (array[i] < array[left])
Swap(array, ++last, i);
}
Swap(array, left, last);
QuickSort(array, left, last - 1);
QuickSort(array, last + 1, right);
}
/// <summary>
/// 交换两个值
/// </summary>
/// <param name="a"></param>
/// <param name="i"></param>
/// <param name="j"></param>
private void Swap(int[] a,int i,int j)
{
int temp;
temp = a[i];
a[i] = a[j];
a[j] = temp;
}
2.C语言字符串处理函数
函数名: strcpy
功 能: 拷贝一个字符串到另一个
用 法: char *stpcpy(char *destin, char *source);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
stpcpy(string, str1);
printf("%sn", string);
return 0;
}
函数名: strcat
功 能: 字符串拼接函数
用 法: char *strcat(char *destin, char *source);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char destination[25];
char *blank = " ", *c = "C++", *Borland = "Borland";
strcpy(destination, Borland);
strcat(destination, blank);
strcat(destination, c);
printf("%sn", destination);
return 0;
}
函数名: strchr
功 能: 在一个串中查找给定字符的第一个匹配之处
用 法: char *strchr(char *str, char c);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char string[15];
char *ptr, c = 'r';
strcpy(string, "This is a string");
ptr = strchr(string, c);
if (ptr)
printf("The character %c is at position: %dn", c, ptr-string);
else
printf("The character was not foundn");
return 0;
}
函数名: strcmp
功 能: 串比较
用 法: int strcmp(char *str1, char *str2);
看Asic码,str1>str2,返回值 > 0;两串相等,返回0
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "aaa", *buf2 = "bbb", *buf3 = "ccc";
int ptr;
ptr = strcmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
else
printf("buffer 2 is less than buffer 1n");
ptr = strcmp(buf2, buf3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3n");
else
printf("buffer 2 is less than buffer 3n");
return 0;
}
函数名: strncmpi
功 能: 将一个串中的一部分与另一个串比较, 不管大小写
用 法: int strncmpi(char *str1, char *str2, unsigned maxlen);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = strcmpi(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1n");
if (ptr == 0)
printf("buffer 2 equals buffer 1n");
return 0;
}
函数名: strcpy
功 能: 串拷贝
用 法: char *strcpy(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
strcpy(string, str1);
printf("%sn", string);
return 0;
}
函数名: strcspn
功 能: 在串中查找第一个给定字符集内容的段
用 法: int strcspn(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *string1 = "1234567890";
char *string2 = "747DC8";
int length;
length = strcspn(string1, string2);
printf("Character where strings intersect is at position %dn", length);
return 0;
}
函数名: strdup
功 能: 将串拷贝到新建的位置处
用 法: char *strdup(char *str);
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *dup_str, *string = "abcde";
dup_str = strdup(string);
printf("%sn", dup_str);
free(dup_str);
return 0;
}
函数名: strcmp
功 能: 比较字符串str1和str2。
用 法: int strcmp(char *str1, char *str2);
说 明: 当s1<s2时,返回值<0
当s1=s2时,返回值=0
当s1>s2时,返回值>0
即:两个字符串自左向右逐个字符相比(按ASCII值大小相比较),直到出现不同的字符或遇'\0'为止。
程序例:
#include<stdio.h>
#include<string.h>
void main()
{
char string[20];
char str[3][20];
int i;
for(i=0;i<3;i++)
gets(str[i]);
if(strcmp(str[0],str[1])>0)
strcpy(string,str[0]);
else
strcpy(string,str[1]);
if(strcmp(str[2],string)>0)
strcpy(string,str[2]);
printf("\nThe largest string is %s\n",string);
}
函数名: stricmp
功 能: 以大小写不敏感方式比较两个串
用 法: int stricmp(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = stricmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1n");
if (ptr == 0)
printf("buffer 2 equals buffer 1n");
return 0;
}
函数名: strerror
功 能: 返回指向错误信息字符串的指针
用 法: char *strerror(int errnum);
程序例:
#include <stdio.h>
#include <errno.h>
int main(void)
{
char *buffer;
buffer = strerror(errno);
printf("Error: %sn", buffer);
return 0;
}
函数名: strcmpi
功 能: 将一个串与另一个比较, 不管大小写
用 法: int strcmpi(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = strcmpi(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1n");
if (ptr == 0)
printf("buffer 2 equals buffer 1n");
return 0;
}
函数名: strncmp
功 能: 串比较
用 法: int strncmp(char *str1, char *str2, int maxlen);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "aaabbb", *buf2 = "bbbccc", *buf3 = "ccc";
int ptr;
ptr = strncmp(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
else
printf("buffer 2 is less than buffer 1n");
ptr = strncmp(buf2,buf3,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3n");
else
printf("buffer 2 is less than buffer 3n");
return(0);
}
函数名: strncmpi
功 能: 把串中的一部分与另一串中的一部分比较, 不管大小写
用 法: int strncmpi(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr;
ptr = strncmpi(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1n");
if (ptr == 0)
printf("buffer 2 equals buffer 1n");
return 0;
}
函数名: strncpy
功 能: 串拷贝
用 法: char *strncpy(char *destin, char *source, int maxlen);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
strncpy(string, str1, 3);
string[3] = '';
printf("%sn", string);
return 0;
}
函数名: strnicmp
功 能: 不注重大小写地比较两个串
用 法: int strnicmp(char *str1, char *str2, unsigned maxlen);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr;
ptr = strnicmp(buf2, buf1, 3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1n");
if (ptr == 0)
printf("buffer 2 equals buffer 1n");
return 0;
}
函数名: strnset
功 能: 将一个串中的所有字符都设为指定字符
用 法: char *strnset(char *str, char ch, unsigned n);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz";
char letter = 'x';
printf("string before strnset: %sn", string);
strnset(string, letter, 13);
printf("string after strnset: %sn", string);
return 0;
}
函数名: strpbrk
功 能: 在串中查找给定字符集中的字符
用 法: char *strpbrk(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *string1 = "abcdefghijklmnopqrstuvwxyz";
char *string2 = "onm";
char *ptr;
ptr = strpbrk(string1, string2);
if (ptr)
printf("strpbrk found first character: %cn", *ptr);
else
printf("strpbrk didn't find character in setn");
return 0;
}
函数名: strrchr
功 能: 在串中查找指定字符的最后一个出现
用 法: char *strrchr(char *str, char c);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char string[15];
char *ptr, c = 'r';
strcpy(string, "This is a string");
ptr = strrchr(string, c);
if (ptr)
printf("The character %c is at position: %dn", c, ptr-string);
else
printf("The character was not foundn");
return 0;
}
函数名: strrev
功 能: 串倒转
用 法: char *strrev(char *str);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *forward = "string";
printf("Before strrev(): %sn", forward);
strrev(forward);
printf("After strrev(): %sn", forward);
return 0;
}
函数名: strset
功 能: 将一个串中的所有字符都设为指定字符
用 法: char *strset(char *str, char c);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10] = "123456789";
char symbol = 'c';
printf("Before strset(): %sn", string);
strset(string, symbol);
printf("After strset(): %sn", string);
return 0;
}
函数名: strspn
功 能: 在串中查找指定字符集的子集的第一次出现
用 法: int strspn(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *string1 = "1234567890";
char *string2 = "123DC8";
int length;
length = strspn(string1, string2);
printf("Character where strings differ is at position %dn", length);
return 0;
}
函数名: strstr
功 能: 在串中查找指定字符串的第一次出现
用 法: char *strstr(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *str1 = "Borland International", *str2 = "nation", *ptr;
ptr = strstr(str1, str2);
printf("The substring is: %sn", ptr);
return 0;
}
函数名: strtod
功 能: 将字符串转换为double型值
用 法: double strtod(char *str, char **endptr);
程序例:
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
char input[80], *endptr;
double value;
printf("Enter a floating point number:");
gets(input);
value = strtod(input, &endptr);
printf("The string is %s the number is %lfn", input, value);
return 0;
}
函数名: strsep
功 能: 分解字符串为一组字符串。从str1指向的位置起向后扫描,遇到delim指向位置的字符后,将此字符替换为NULL,返回str1指向的地址。
用 法: char *strtok(char **str1, const char *delim);
程序例:
int main()
{
int len, nel;
char query[] ="user_command=appleboy&test=1&test2=2";
char *q, *name, *value; /* Parse into individualassignments */
q = query; fprintf(stderr, "CGI[query string] : %s\n",query);
len = strlen(query);
nel = 1;
while (strsep(&q, "&"))
nel++;
fprintf(stderr, "CGI[nel string] : %d\n", nel);
for (q = query; q< (query + len);)
{
value = name = q; /* Skip to next assignment */
fprintf(stderr, "CGI[string] :%s\n", q);
fprintf(stderr, "CGI[stringlen] : %d\n", strlen(q));
fprintf(stderr, "CGI[address] :%x\n", q);
for (q += strlen(q); q < (query +len) && !*q; q++); /* Assign variable */
name = strsep(&value,"=");
fprintf(stderr, "CGI[name ] :%s\n", name);
fprintf(stderr, "CGI[value] :%s\n", value);
}
return 0;
}
函数名: strtok
功 能: 查找由在第二个串中指定的分界符分隔开的单词
用 法: char *strtok(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char input[16] = "abc,d";
char *p;
/* strtok places a NULL terminator
in front of the token, if found */
p = strtok(input, ",");
if (p) printf("%sn", p);
/* A second call to strtok using a NULL
as the first parameter returns a pointer
to the character following the token */
p = strtok(NULL, ",");
if (p) printf("%sn", p);
return 0;
}
函数名: strtol
功 能: 将串转换为长整数
用 法: long strtol(char *str, char **endptr, int base);
程序例:
#include <stdlib.h>
#include <stdio.h>
int main(void)
{
char *string = "87654321", *endptr;
long lnumber;
/* strtol converts string to long integer */
lnumber = strtol(string, &endptr, 10);
printf("string = %s long = %ldn", string, lnumber);
return 0;
}
函数名: strupr
功 能: 将串中的小写字母转换为大写字母
用 法: char *strupr(char *str);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz", *ptr;
/* converts string to upper case characters */
ptr = strupr(string);
printf("%sn", ptr);
return 0;
}
函数名: swab
功 能: 交换字节
用 法: void swab (char *from, char *to, int nbytes);
程序例:
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
char source[15] = "rFna koBlrna d";
char target[15];
int main(void)
{
swab(source, target, strlen(source));
printf("This is target: %sn", target);
return 0;
}
PS:isalpha()是字符函数,不是字符串函数,
isalpha
原型:extern int isalpha(int c);
用法:#include <ctype.h>
功能:判断字符c是否为英文字母
说明:当c为英文字母a-z或A-Z时,返回非零值,否则返回零。
举例:
// isalpha.c
#include <syslib.h>
#include <ctype.h>
#include <stdio.h>
main()
{
int c;
clrscr(); // clear screen
printf("Press a key");
for(;;)
{
c=getchar();
clrscr();
printf("%c: %s letter",c,isalpha(c)?"is":"not");
}
return 0; // just to avoid warnings by compiler
}