Linux capability


/**
 ** POSIX-draft defined capabilities.
 **/

/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
   overrides the restriction of changing file ownership and group
   ownership. */

#define CAP_CHOWN            0

/* Override all DAC access, including ACL execute access if
   [_POSIX_ACL] is defined. Excluding DAC access covered by
   CAP_LINUX_IMMUTABLE. */

#define CAP_DAC_OVERRIDE     1

/* Overrides all DAC restrictions regarding read and search on files
   and directories, including ACL restrictions if [_POSIX_ACL] is
   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */

#define CAP_DAC_READ_SEARCH  2

/* Overrides all restrictions about allowed operations on files, where
   file owner ID must be equal to the user ID, except where CAP_FSETID
   is applicable. It doesn't override MAC and DAC restrictions. */

#define CAP_FOWNER           3

/* Overrides the following restrictions that the effective user ID
   shall match the file owner ID when setting the S_ISUID and S_ISGID
   bits on that file; that the effective group ID (or one of the
   supplementary group IDs) shall match the file owner ID when setting
   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
   cleared on successful return from chown(2) (not implemented). */

#define CAP_FSETID           4

/* Overrides the restriction that the real or effective user ID of a
   process sending a signal must match the real or effective user ID
   of the process receiving the signal. */

#define CAP_KILL             5

/* Allows setgid(2) manipulation */
/* Allows setgroups(2) */
/* Allows forged gids on socket credentials passing. */

#define CAP_SETGID           6

/* Allows set*uid(2) manipulation (including fsuid). */
/* Allows forged pids on socket credentials passing. */

#define CAP_SETUID           7


/**
 ** Linux-specific capabilities
 **/

/* Without VFS support for capabilities:
 *   Transfer any capability in your permitted set to any pid,
 *   remove any capability in your permitted set from any pid
 * With VFS support for capabilities (neither of above, but)
 *   Add any capability from current's capability bounding set
 *       to the current process' inheritable set
 *   Allow taking bits out of capability bounding set
 *   Allow modification of the securebits for a process
 */

#define CAP_SETPCAP          8

/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */

#define CAP_LINUX_IMMUTABLE  9

/* Allows binding to TCP/UDP sockets below 1024 */
/* Allows binding to ATM VCIs below 32 */

#define CAP_NET_BIND_SERVICE 10

/* Allow broadcasting, listen to multicast */

#define CAP_NET_BROADCAST    11

/* Allow interface configuration */
/* Allow administration of IP firewall, masquerading and accounting */
/* Allow setting debug option on sockets */
/* Allow modification of routing tables */
/* Allow setting arbitrary process / process group ownership on
   sockets */
/* Allow binding to any address for transparent proxying */
/* Allow setting TOS (type of service) */
/* Allow setting promiscuous mode */
/* Allow clearing driver statistics */
/* Allow multicasting */
/* Allow read/write of device-specific registers */
/* Allow activation of ATM control sockets */

#define CAP_NET_ADMIN        12

/* Allow use of RAW sockets */
/* Allow use of PACKET sockets */

#define CAP_NET_RAW          13

/* Allow locking of shared memory segments */
/* Allow mlock and mlockall (which doesn't really have anything to do
   with IPC) */

#define CAP_IPC_LOCK         14

/* Override IPC ownership checks */

#define CAP_IPC_OWNER        15

/* Insert and remove kernel modules - modify kernel without limit */
#define CAP_SYS_MODULE       16

/* Allow ioperm/iopl access */
/* Allow sending USB messages to any device via /proc/bus/usb */

#define CAP_SYS_RAWIO        17

/* Allow use of chroot() */

#define CAP_SYS_CHROOT       18

/* Allow ptrace() of any process */

#define CAP_SYS_PTRACE       19

/* Allow configuration of process accounting */

#define CAP_SYS_PACCT        20

/* Allow configuration of the secure attention key */
/* Allow administration of the random device */
/* Allow examination and configuration of disk quotas */
/* Allow setting the domainname */
/* Allow setting the hostname */
/* Allow calling bdflush() */
/* Allow mount() and umount(), setting up new smb connection */
/* Allow some autofs root ioctls */
/* Allow nfsservctl */
/* Allow VM86_REQUEST_IRQ */
/* Allow to read/write pci config on alpha */
/* Allow irix_prctl on mips (setstacksize) */
/* Allow flushing all cache on m68k (sys_cacheflush) */
/* Allow removing semaphores */
/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
   and shared memory */
/* Allow locking/unlocking of shared memory segment */
/* Allow turning swap on/off */
/* Allow forged pids on socket credentials passing */
/* Allow setting readahead and flushing buffers on block devices */
/* Allow setting geometry in floppy driver */
/* Allow turning DMA on/off in xd driver */
/* Allow administration of md devices (mostly the above, but some
   extra ioctls) */
/* Allow tuning the ide driver */
/* Allow access to the nvram device */
/* Allow administration of apm_bios, serial and bttv (TV) device */
/* Allow manufacturer commands in isdn CAPI support driver */
/* Allow reading non-standardized portions of pci configuration space */
/* Allow DDI debug ioctl on sbpcd driver */
/* Allow setting up serial ports */
/* Allow sending raw qic-117 commands */
/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
   arbitrary SCSI commands */
/* Allow setting encryption key on loopback filesystem */
/* Allow setting zone reclaim policy */

#define CAP_SYS_ADMIN        21

/* Allow use of reboot() */

#define CAP_SYS_BOOT         22

/* Allow raising priority and setting priority on other (different
   UID) processes */
/* Allow use of FIFO and round-robin (realtime) scheduling on own
   processes and setting the scheduling algorithm used by another
   process. */
/* Allow setting cpu affinity on other processes */

#define CAP_SYS_NICE         23

/* Override resource limits. Set resource limits. */
/* Override quota limits. */
/* Override reserved space on ext2 filesystem */
/* Modify data journaling mode on ext3 filesystem (uses journaling
   resources) */
/* NOTE: ext2 honors fsuid when checking for resource overrides, so
   you can override using fsuid too */
/* Override size restrictions on IPC message queues */
/* Allow more than 64hz interrupts from the real-time clock */
/* Override max number of consoles on console allocation */
/* Override max number of keymaps */

#define CAP_SYS_RESOURCE     24

/* Allow manipulation of system clock */
/* Allow irix_stime on mips */
/* Allow setting the real-time clock */

#define CAP_SYS_TIME         25

/* Allow configuration of tty devices */
/* Allow vhangup() of tty */

#define CAP_SYS_TTY_CONFIG   26

/* Allow the privileged aspects of mknod() */

#define CAP_MKNOD            27

/* Allow taking of leases on files */

#define CAP_LEASE            28

#define CAP_AUDIT_WRITE      29

#define CAP_AUDIT_CONTROL    30

#define CAP_SETFCAP	     31

/* Override MAC access.
   The base kernel enforces no MAC policy.
   An LSM may enforce a MAC policy, and if it does and it chooses
   to implement capability based overrides of that policy, this is
   the capability it should use to do so. */

#define CAP_MAC_OVERRIDE     32

/* Allow MAC configuration or state changes.
   The base kernel requires no MAC configuration.
   An LSM may enforce a MAC policy, and if it does and it chooses
   to implement capability based checks on modifications to that
   policy or the data required to maintain it, this is the
   capability it should use to do so. */

#define CAP_MAC_ADMIN        33

/* Allow configuring the kernel's syslog (printk behaviour) */

#define CAP_SYSLOG           34

/* Allow triggering something that will wake the system */

#define CAP_WAKE_ALARM            35

 

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值