MGRE环境下的OSPF实验

实验拓扑图：

路由器配置：

R1：

[R1]acl 2000
[R1-acl-basic-2000]rule permit source any
[R1-GigabitEthernet0/0/2]nat outbound 2000
[R1-GigabitEthernet0/0/1]nat outbound 2000
[R1]ip route-static 0.0.0.0 0 16.1.1.2
[R1]ip route-static 0.0.0.0 0 61.1.1.2

[R1]int tunnel 0/0/0
[R1-Tunnel0/0/0]ip ad    
[R1-Tunnel0/0/0]ip address 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/0]source 16.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100 

[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip address 20.1.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp 
[R1-Tunnel0/0/1]source 61.1.1.1
[R1-Tunnel0/0/1]nhrp network-id 101
[R1-Tunnel0/0/1]nhrp entry 20.1.1.3 56.1.1.1 register

[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 20.1.1.0 0.0.0.255

[R1-Tunnel0/0/0]ospf network-type broadcast
[R1-Tunnel0/0/0]nhrp entry multicast dynamic

[R1-Tunnel0/0/1]ospf network-type broadcast
[R1-Tunnel0/0/1]nhrp entry multicast dynamic

R2：

[R2]acl 2000
[R2-acl-basic-2000]rule permit source any
[R2-GigabitEthernet0/0/1]nat outbound 2000
[R2]ip route-static 0.0.0.0 0 26.1.1.2

[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R2-Tunnel0/0/0]source GigabitEthernet 0/0/1
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 16.1.1.1 register

[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255

[R2-Tunnel0/0/0]ospf network-type broadcast
[R2-Tunnel0/0/0]nhrp entry multicast dynamic
[R2-GigabitEthernet0/0/1]ospf dr-priority 0
<R2>reset ospf process

R3：

[R3]acl 2000
[R3-acl-basic-2000]rule permit source any
[R3-GigabitEthernet0/0/1]nat outbound 2000
[R3]ip route-static 0.0.0.0 0 36.1.1.2
 

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip address 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 
[R3-Tunnel0/0/0]source GigabitEthernet 0/0/1
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 16.1.1.1 register

[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0    
[R3-ospf-1-area-0.0.0.0]network 192.168.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255

[R3-Tunnel0/0/0]ospf network-type broadcast
[R3-Tunnel0/0/0]nhrp entry multicast dynamic
[R3-GigabitEthernet0/0/1]ospf dr-priority 0
<R3>reset ospf process

R4：
[R4]acl 2000
[R4-acl-basic-2000]rule permit source any
[R4-GigabitEthernet0/0/1]nat outbound 2000
[R4]ip route-static 0.0.0.0 0 46.1.1.2

[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip address 20.1.1.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre p2mp 
[R4-Tunnel0/0/1]source GigabitEthernet 0/0/1
[R4-Tunnel0/0/1]nhrp network-id 101
[R4-Tunnel0/0/1]nhrp entry 20.1.1.1 61.1.1.1 register
[R4-Tunnel0/0/1]nhrp entry 20.1.1.3 56.1.1.1 register

[R4]ospf 1 router-id 4.4.4.4     
[R4-ospf-1]area 0    
[R4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]network 20.1.1.0 0.0.0.255

[R4-Tunnel0/0/0]ospf network-type broadcast
[R4-Tunnel0/0/0]nhrp entry multicast dynamic
[R4-GigabitEthernet0/0/1]ospf dr-priority 0
<R4>reset ospf process

R5：

[R5]acl 2000
[R5-acl-basic-2000]rule permit source any
[R5-GigabitEthernet0/0/1]nat outbound 2000
[R5]ip route-static 0.0.0.0 0 56.1.1.2

[R5]int Tunnel 0/0/1
[R5-Tunnel0/0/1]ip address 20.1.1.3 24
[R5-Tunnel0/0/1]tunnel-protocol gre p2mp 
[R5-Tunnel0/0/1]source 56.1.1.1 
[R5-Tunnel0/0/1]nhrp network-id 101
[R5-Tunnel0/0/1]nhrp entry 20.1.1.1  61.1.1.1 register

[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 192.168.5.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]network 20.1.1.0 0.0.0.255

[R5-Tunnel0/0/0]ospf network-type broadcast
[R5-Tunnel0/0/0]nhrp entry multicast dynamic
[R5-GigabitEthernet0/0/1]ospf dr-priority 0
<R5>reset ospf process

测试：