- 博客(1)
- 资源 (3)
- 收藏
- 关注
RSS订阅转载 USB PCB 设计建议
from：https://blog.csdn.net/qq_29350001/article/details/52469256USB PCB 设计建议为了保证良好的信号质量， USB 2.0 端口数据信号线按照差分线方式走线。为了达到USB 2.0 高速 480MHz 的速度要求，建议 PCB 布线设计采用以下原则：差分数据线走线尽可能短、直，差分数据线对内走线长度严格等长，走线长度偏差...
2019-12-06 14:00:09
995
v4l2标准.pdf
Video For Linux Two is the second version of the Video For Linux API, a kernel interface for analog radio and video capture and output drivers.
Early drivers used ad-hoc interfaces. These were replaced in Linux 2.2 by Alan Cox' V4L API, based on the interface of the bttv driver. In 1999 Bill Dirks started the development of V4L2 to fix some shortcomings of V4L and to support a wider range of devices. The API was revised again in 2002 prior to its inclusion in Linux 2.5/2.6, and work continues o
2019-11-09
USB_in_a_Nutshell.pdf
Starting out new with USB can be quite daunting. With the USB 2.0 specification at 650 pages one could easily be
put off just by the sheer size of the standard. This is only the beginning of a long list of associated standards for
USB. There are USB Class Standards such as the HID Class Specification which details the common operation of
devices (keyboards, mice etc) falling under the HID (Human Interface Devices) Class - only another 97 pages. If
you are designing a USB Host, then you have three Host Controller Interface Standards to choose from. None of
these are detailed in the USB 2.0 Spec.
2019-11-06
MobaXterm Professional Edition 10.4 Portable 破解版
MobaXterm Professional Edition 10.4 Portable. 很强大终端工具，比secureCRT，putty 好用一千倍。
2018-03-08
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人