三路99分钟倒计时程序

//99分倒计时#include"stc8H.h"#include “intrins.h”#include “daojishi.h”#include “GPIO_init.h”#define uint unsigned int#define uchar unsigned char #define ET3 0x20#define ET4 0x40#define T3IF 0x02#define T4IF 0x04sbit jiare_ge = P0^2; sbit jiare_shi = P0^3; sbit lenque_ge = P1^0; sbit lenque_shi = P1^1;sbit sajun_ge = P1^2; sbit sajun_shi = P1^3;//sbit LIGHT_JDQ = P3^7; uchar count;char sec,min;bit flag,flag1,flag2,flag3;uchar code table[]={ 0x03,/0/ 0x9F,/1/ 0x25,/2/ 0x0D,/3/ 0x99,/4/ 0x49,/5/ 0x41,/6/ 0x1F,/7/ 0x01,/8/ 0x09,/9/};//sbit a = P2^7;//sbit b = P2^6;//sbit c = P2^5;//sbit d = P2^4;//sbit e = P2^3;//sbit f = P2^2;//sbit g = P2^1;//sbit h = P2^0;//sbit LED_com = P3^1;void GPIO_init(){ P0M0 = 0x00; P0M1 = 0x00; P1M0 = 0x00; P1M1 = 0x60; P2M0 = 0x00; P2M1 = 0x00; P3M0 = 0x00; P3M1 = 0x00; P4M0 = 0x00; P4M1 = 0x00; P5M0 = 0x00; P5M1 = 0x00;} void T0_init() //5毫秒@11.0592MHz{ AUXR &= 0x7F; //定时器时钟12T模式 TMOD &= 0xF0; //设置定时器模式 TL0 = 0x00; //设置定时初始值 TH0 = 0xEE; //设置定时初始值 TF0 = 0; //清除TF0标志 TR0 = 1; //定时器0开始计时 ET0 = 1; //使能定时器0中断 }void T1_init() //5毫秒@11.0592MHz{ AUXR &= 0xBF; //定时器时钟12T模式 TMOD &= 0x0F; //设置定时器模式 TL1 = 0x00; //设置定时初始值 TH1 = 0xEE; //设置定时初始值 TF1 = 0; //清除TF0标志 TR1 = 1; //定时器0开始计时 ET1 = 1; //使能定时器0中断}void T3_init() //5毫秒@11.0592MHz{ T4T3M &= 0xFD; //定时器时钟12T模式 T3L = 0x00; //65536-11.0592M/12/1000 T3H = 0xEE; IE2 = ET3; //使能定时器中断 T4T3M |= 0x08; //定时器3开始计时}//void T4_init() //5毫秒@11.0592MHz//{ // T4T3M &= 0xDF; //定时器时钟12T模式// T4L = 0x00; //65536-11.0592M/12/1000// T4H = 0xEE;// // T4T3M = 0x80; //启动定时器// IE2 = ET4; //使能定时器中断//}void jiare_display(){ static bit i=0; static uchar temp=0; P2=0xff; i=~i; if(++temp>=200)temp=0; if(i1) { jiare_ge = 0; jiare_shi = 1; P2=table[min/10]; } else { jiare_ge = 1; jiare_shi = 0; if(temp<100) P2=table[min%10]&0xfe;//闪秒 else P2=table[min%10]; } }void lenque_display(){ static bit i=0; static uchar temp=0; P2=0xff; i=~i; if(++temp>=200)temp=0; if(i1) { lenque_ge = 0; lenque_shi = 1; P2=table[min/10]; } else { lenque_ge = 1; lenque_shi = 0; if(temp<100) P2=table[min%10]&0xfe;//闪秒 else P2=table[min%10]; } }void sajun_display(){ static bit i=0; static uchar temp=0; P2=0xff; i=~i; if(++temp>=200)temp=0; if(i==1) { sajun_ge = 0; sajun_shi = 1; P2=table[min/10]; } else { sajun_ge = 1; sajun_shi = 0; if(temp<100) P2=table[min%10]&0xfe;//闪秒 else P2=table[min%10]; } }void jiare_daojishi(){ if(flag) { flag=0; if(++count >= 200) { count = 0; sec–; if(sec < 0) { sec = 59; min–; if(min < 0) min=99; } } jiare_display(); }}void lenque_daojishi(){ if(flag1) { flag1=0; if(++count >= 200) { count = 0; sec–; if(sec < 0) { sec = 59; min–; if(min < 0) min=99; } } lenque_display(); }}void sajun_daojishi(){ if(flag2) { flag2=0; if(++count >= 200) { count = 0; sec–; if(sec < 0) { sec = 59; min–; if(min < 0) min=99; } } sajun_display(); }} void main() { GPIO_init(); EA = 1; T0_init() ; T1_init() ; T3_init() ;// T4_init(); while (1) { jiare_daojishi(); lenque_daojishi(); sajun_daojishi(); } } void TM0_Isr() interrupt 1 //5毫秒定时器0{ TL0 = 0x00; //设置定时初始值 TH0 = 0xEE; //设置定时初始值 flag=1;}void TM1_Isr() interrupt 3 //5毫秒定时器1{ TL1 = 0x00; //设置定时初始值 TH1 = 0xEE; //设置定时初始值 flag1=1;}void TM3_Isr() interrupt 19 //5毫秒定时器3{ TL1 = 0x00; //设置定时初始值 TH1 = 0xEE; //设置定时初始值 flag2=1;}//void TM4_Isr() interrupt 20 //定时器4 //{// TL1 = 0x00; //设置定时初始值5ms// TH1 = 0xEE; //设置定时初始值// flag3=1; //测试端口//}