H3C交换机恢复出厂设备

1、Console进设备后执行如下操作

SW1>reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash: is being cleared.
Please wait ...
MainBoard:
Configuration file is cleared.

SW1>reboot
Start to check configuration with next startup configuration file, please wait.
........DOZM
Current configuration may be lost after the reboot, save current configuration? [Y/NJ:n
This command will reboot the device. Continue? [Y/N]:y
1 00:07:10:092 2013 6F-160.26 DEV/5/SYSTEM REBOOT: System is rebooting now.
Now rebooting, please wait ....%Jan
./0mp *)口
Starting......
Ctrl+D to access BASIC BOOT MENU

2、等待重启后进入，恢复出厂设置OK.